Characterization of the magnetic interactions of multiphase magnetocaloric materials using first-order reversal curve analysis

In order to understand the magnetocaloric response of materials, it is important to analyze the interactions between the different phases present in them. Recent models have analyzed the influence of these interactions on the magnetocaloric response of composites, providing an estimate value of the interaction field that is consistent with experimental results. This paper analyzes to which extent magnetization first-order reversal curve (FORC) method can be used to calculate these interactions. It is shown that the different field ranges that are explored using these techniques (inside the hysteretic region for FORC; close to magnetic saturation for magnetocaloric effect) produce interaction field values that differ in order of magnitude, with FORC being sensitive to the lower values of the interaction field and magnetocaloric analysis accounting for the larger interactions

Design of super-paramagnetic bilayer films based on chitosan and sodium alginate

Bilayer films that combine chitosan and alginate, two natural polysaccharides, and magnetic iron oxide nanoparticles (MNPs) were obtained. Physical and microscopic observations revealed that chitosan and alginate interact strongly through their surfaces, which is attributed to the formation of a polyelectrolyte complex at the interface. The diameter of the individual MNPs was about 10 nm, although in the films they appear arranged in clusters with sizes ranging from 23 nm to several times larger that are formed by collapsed individual particles. All bilayers containing MNP behave as super-paramagnetic materials, exhibiting magnetic synergic effects in comparison to single carbohydrate films. Thus, obtained films could find novel and interesting applications as pH responsiveness systems, pad dressings including hyperthermia, adsorption of positive and negative charged pollutants, etc.Fil: Kloster, Gianina Andrea. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Moscoso Londoño, Oscar. Universidad Autónoma de Manizales; Colombia. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Pirota, Kleber R.. Universidade Estadual de Campinas; BrasilFil: Mosiewicki, Mirna Alejandra. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Marcovich, Norma Esther. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentin

Compact Ag@fe3o4 Core-shell Nanoparticles By Means Of Single-step Thermal Decomposition Reaction.

A temperature pause introduced in a simple single-step thermal decomposition of iron, with the presence of silver seeds formed in the same reaction mixture, gives rise to novel compact heterostructures: brick-like Ag@Fe3O4 core-shell nanoparticles. This novel method is relatively easy to implement, and could contribute to overcome the challenge of obtaining a multifunctional heteroparticle in which a noble metal is surrounded by magnetite. Structural analyses of the samples show 4 nm silver nanoparticles wrapped within compact cubic external structures of Fe oxide, with curious rectangular shape. The magnetic properties indicate a near superparamagnetic like behavior with a weak hysteresis at room temperature. The value of the anisotropy involved makes these particles candidates to potential applications in nanomedicine.4683

The role of Cu length on the magnetic behaviour of Fe/Cu multi-segmented nanowires

CNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOFAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOA set of multi-segmented Fe/Cu nanowires were synthesized by a two-step anodization process of aluminum substrates and a pulsed electrodeposition technique using a single bath. While both Fe segment length and diameter were kept constant to (30 +/- 7) and (45 +/- 5) nm, respectively, Cu length was varied between (15 +/- 5) and (120 +/- 10) nm. The influence of the non-magnetic layer thickness variation on the nanowire magnetic properties was investigated through first-order reversal curve (FORC) measurements and micromagnetic simulations. Our analysis confirmed that, in the multi-segmented Fe/Cu nanowires with shorter Cu segments, the dipolar coupling between Fe segments controls the nanowire magnetic behavior, and its performance is like that of a homogenous Fe nanowire array of similar dimensions. On the other hand, multi-segmented Fe/Cu nanowires with larger Cu segments act like a collection of non-interacting magnetic entities (along the nanowire axis), and their global behavior is mainly controlled by the neighbor-to-neighbor nanodisc dipolar interactions.87112CNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOFAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOCNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOFAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO234513/2014-4sem informaçãoAgências de fomento estrangeiras apoiaram essa pesquisa, mais informações acesse artig

How to Characterize Cylindrical Magnetic Nanowires

Cylindrical magnetic nanowires made through the help of nanoporous alumina templates are being fabricated and characterized since the beginning of 2000. They are still actively investigated nowadays, mainly due to their various promising applications, ranging from high-density magnetic recording to high-frequency devices, passing by sensors, and biomedical applications. They also represent suitable systems in order to study the dimensionality effects on a given material. With time, the development in fabrication techniques allowed to increase the obtained nanowire complexity (controlled crystallinity, modulated composition and/or geometry, range of materials, etc.), while the improvements in nanomanipulation permitted to fabricate system based either on arrays or on single nanowires. On the other side, their increased complexity requires specific physical characterization methods, due to their particular features such as high anisotropy, small magnetic volume, dipolar interaction field between them, and interesting electronic properties. The aim of this chapter was to offer an ample overview of the magnetic, electric, and physical characterization techniques that are suitable for cylindrical magnetic nanowire investigation, of what is the specific care that one needs to take into account and which information will be extracted, with typical and varied examples

Tailoring of magnetocaloric response in nanostructured materials: Role of anisotropy

The magnetocaloric response of an ensemble of oriented uniaxial magnetic objects, perpendicularly magne- tized to their easy axes, for temperatures close to the blocking temperature is calculated with the aim of demonstrating that the control of the sample’s microstructure makes up an effective way to tailor its magne- tocaloric response. Coexisting positive and negative magnetocaloric effect (MCE) is found for a model mate- rial with a single magnetic phase transition. Both MCE regimes are controlled by the magnitude of the applied magnetic field. As a proof of concept, experimental results for arrays of self-assembled ferromagnetic nano- wires embedded into highly ordered nanoporous anodic alumina templates are shown, suggesting the validity of the numerical calculations

From quenched to unquenched orbital magnetic moment on metallic@oxide nanoparticles: dc magnetic properties and electronic correlation

FAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOIn this study, the correlation between magnetic, structure, and electronic properties of Ag@Fe3O4 hetero nanostructures are presented. These nanostructures were prepared using a two-step new chemical approach. Three different nanoparticle systems with different Ag concentrations have been prepared and characterized using high resolution transmission electron microscopy, dc magnetization (magnetization and coercive field as a function of temperature), X-ray absorption near edge spectroscopy, and magnetic circular dichroism studies (XMCD). From the correlation between XMCD and dc magnetic measurements (Verwey transition) the presence of non-stoichiometric magnetite in Ag@Fe3O4 nanoparticle systems was confirmed. From the spin and orbital contribution to the total magnetic moment, we conclude that the sample with less Ag seeds particle concentration presents a non-quenched orbital contribution. These phenomena were analyzed based on the actual models and correlated with dc magnetic properties. From these, we conclude that the enhancement on the orbital contribution increases the spin orbital interaction, also increasing the magnetocrystalline anisotropy reflected on the dc magnetic properties.In this study, the correlation between magnetic, structure, and electronic properties of Ag@Fe3O4 hetero nanostructures are presented. These nanostructures were prepared using a two-step new chemical approach. Three different nanoparticle systems with different Ag concentrations have been prepared and characterized using high resolution transmission electron microscopy, dc magnetization (magnetization and coercive field as a function of temperature), X-ray absorption near edge spectroscopy, and magnetic circular dichroism studies (XMCD). From the correlation between XMCD and dc magnetic measurements (Verwey transition) the presence of non-stoichiometric magnetite in Ag@Fe3O4 nanoparticle systems was confirmed. From the spin and orbital contribution to the total magnetic moment, we conclude that the sample with less Ag seeds particle concentration presents a non-quenched orbital contribution. These phenomena were analyzed based on the actual models and correlated with dc magnetic properties. From these, we conclude that the enhancement on the orbital contribution increases the spin orbital interaction, also increasing the magnetocrystalline anisotropy reflected on the dc magnetic properties.15118FAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOFAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOSem informaçãoThis study was financially supported by the Brazilian agency FAPESP. These studies were performed in the Instituto de Fisica Gleb Wataghin, Universidade Estadual de Campinas-UNICAMP. TEM data were acquired by Dr. L. Socolovsky at the LME-HRTEM (JEM-3010) of the Brazilian Synchrotron Light Laboratory (LNLS). Carlos Ramos, from Instituto Balseiro, is also acknowledged for fruitful discussions

Nanocomposites with superparamagnetic behavior based on a vegetable oil and magnetite nanoparticles

The direct reaction of unmodified tung oil and styrene initiated by boron trifluoride diethyl etherate allowed obtaining thermoset polymers with valuable properties like shape memory behavior. On the other hand, the addition of magnetite nanoparticles (MNPs) to the tung oil/styrene copolymer was considered, in order to improve/modify its properties. MNPs were synthesized by the method of alkaline coprecipitation, followed by coating with oleic acid in order to hydrophobize their surfaces and make them more compatible with the polymeric matrix. Thus, superparamagnetic polymer nanocomposites were prepared from the inclusion of the MNPs to the cationically copolymerized tung oil (TO) and styrene (St) networks. The morphology, dynamic–mechanical and mechanical properties of the copolymers as well as magnetic behavior were significantly affected by the variation of the concentration of the MNPs.Fil: Meiorin, Cintia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Muraca, Diego. Universidade Estadual de Campinas; Brasil. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Pirota, Kleber R.. Universidade Estadual de Campinas; BrasilFil: Aranguren, Mirta Ines. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Mosiewicki, Mirna Alejandra. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentin

Magnetic characterization of chitosan–magnetite nanocomposite films

Magnetic nanocomposites using chitosan as a matrix and magnetite nanoparticles generated "in situ" were prepared and magnetically characterized. The content of nanoparticles on the composites was varied from 2 to 10 wt.% and their effects, as well as the addition of 30 wt.% of glycerol as plasticizer in the formulation, were analyzed. The magnetization properties were evaluated using the zero field cooling/field cooling (ZFC/FC) measurements and magnetization loops obtained at different temperatures. The results showed that magnetization at high field (20 KOe) and coercitivity increase with magnetite content. Super-paramagnetic behavior was observed for all non-plasticized samples with exception of the film with 2 wt.% of magnetite. Glycerol affected significantly the composite magnetization values and the magnetic interactions between particles, which are reflected in the blocking and irreversibility temperatures of the different systems. Moreover, the size of the precipitated magnetic nanoparticles depends on their concentration as well as on the addition of plasticizer to the formulation, as was corroborated by TEM and SAXS measurements.Fil: Kloster, Gianina Andrea. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Muraca, Diego. Universidade Estadual de Campinas; BrasilFil: Meiorin, Cintia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; Argentina. Universidade Estadual de Campinas; BrasilFil: Pirota, Kleber R.. Universidade Estadual de Campinas; BrasilFil: Marcovich, Norma Esther. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Mosiewicki, Mirna Alejandra. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; Argentin