Influence of diffusion on models for non-equilibrium wetting

It is shown that the critical properties of a recently studied model for non-equilibrium wetting are robust if one extends the dynamic rules by single-particle diffusion on terraces of the wetting layer. Examining the behavior at the critical point and along the phase transition line, we identify a special point in the phase diagram where detailed balance of the dynamical processes is partially broken.Comment: 6 pages, 9 figure

Range-resolved interferometric signal processing using sinusoidal optical frequency modulation

A novel signal processing technique using sinusoidal optical frequency modulation of an inexpensive continuous-wave laser diode source is proposed that allows highly linear interferometric phase measurements in a simple, self-referencing setup. Here, the use of a smooth window function is key to suppress unwanted signal components in the demodulation process. Signals from several interferometers with unequal optical path differences can be multiplexed, and, in contrast to prior work, the optical path differences are continuously variable, greatly increasing the practicality of the scheme. In this paper, the theory of the technique is presented, an experimental implementation using three multiplexed interferometers is demonstrated, and detailed investigations quantifying issues such as linearity and robustness against instrument drift are performed

Fibre segment interferometry using code-division multiplexed optical signal processing for strain sensing applications

A novel optical signal processing scheme for multiplexing fibre segment interferometers is proposed. The continuous-wave, homodyne technique combines code-division multiplexing with single-sideband modulation. It uses only one electro-optic phase modulator to achieve both range separation and quadrature interferometric phase measurement. This scheme is applied to fibre segment interferometry, where a number of long-gauge length interferometric fibre sensors are formed by subtracting pairs of signals from equidistantly placed, weak back reflectors. In this work we give a detailed account of the signal processing involved and, in particular, explore aspects such as electronic bandwidth requirements, noise, crosstalk and linearity, which are important design considerations. A signal bandwidth of ±20 kHz permits the resolution of phase change rates of 2.5 × 104 rad s-1 for each of the four 16.5 m long segments in our setup. We show that dynamic strain resolutions below 0.2 nanostrain Hz-0.5 at 2 m sensor gauge length are achievable, even with an inexpensive diode laser. When used in applications that require only relative strain change measurements, this scheme compares well to more established techniques and can provide high-fidelity yet cost-effective measurements

Investigation of an axial-excursion transducer for squeeze-film bearings

Resonant frequencies and characteristic bearing cone motion of axial-excursion transducer for squeeze-film gas bearing - drive voltage, preload, bearing mass, and mounting ring effect

Range-resolved signal processing for fibre segment interferometry applied to dynamic long-gauge length strain sensing

A range-resolved interferometric signal processing technique using sinusoidal optical frequency modulation is applied to fibre segment interferometry. Here, six optical fibre segments of gauge length 12.5 cm are used as interferometric strain sensors and are formed between seven weak, broadband fibre Bragg gratings, acting as in-fibre partial reflectors. In a very simple and cost-effective optical setup using injection current modulation of a laser diode source, interferometric measurement of acoustic wave propagation in a metal rod is used to demonstrate the capabilities of the technique

The glass transition and crystallization kinetic studies on BaNaB9O15 glasses

Transparent glasses of BaNaB9O15 (BNBO) were fabricated via the conventional melt-quenching technique. The amorphous and the glassy nature of the as-quenched samples were respectively, confirmed by X-ray powder diffraction (XRD) and differential scanning calorimetry (DSC). The glass transition and crystallization parameters were evaluated under non-isothermal conditions using DSC. The correlation between the heating rate dependent glass transition and the crystallization temperatures was discussed and deduced the Kauzmann temperature for BNBO glass-plates and powdered samples. The values of the Kauzmann temperature for the plates and powdered samples were 776 K and 768 K, respectively. Approximation-free method was used to evaluate the crystallization kinetic parameters for the BNBO glass samples. The effect of the sample thickness on the crystallization kinetics of BNBO glasses was also investigated.Comment: 23 pages, 12 figure

Simultaneous laser vibrometry on multiple surfaces with a single beam system using range-resolved interferometry

A novel range-resolved interferometric signal processing technique that uses sinusoidal optical frequency modulation is applied to multi-surface vibrometry, demonstrating simultaneous optical measurements of vibrations on two surfaces using a single, collimated laser beam, with a minimum permissible distance of 3.5 cm between surfaces. The current system, using a cost-effective laser diode and a fibre-coupled, downlead insensitive setup, allows an interferometric fringe rate of up to 180 kHz to be resolved with typical displacement noise levels of 8 pm Hz-0.5. In this paper, the system is applied to vibrometry measurements of a table-top cryostat, with concurrent measurements of the optical widow and the sample holder inside. This allows the separation of common-mode vibrations of the whole cryostat from differential vibrations between the window and the sample holder.EPSR

HYDROGEN BONDING IN betabeta-NITRO ALCOHOLS. III. PYRIDINE COMPLEXES

BETA -Nitro alcohols form stable 1:1 complexes with pyridine, examples of which were prepared. In solvents such as dichloromethane and carbon tetrachloride the complexes partially dissociate into their components. The dissociation constants for the equilibria were determined by infrared methods and may be used as a measure of the strength of the complex hydrogen bond. The dissociation constants decrease with increasing number of BETA -nitro groups. Some reactions of the pyridine complexes are described. (auth