9 research outputs found
Adaptive V2G peak shaving and smart charging control for grid integration of PEVs.
The stochastic nature of plug-in electric vehicle (PEV) driving behavior and distribution grid load profile make it challenging to control vehicle-grid integration in a mutually beneficial way. This article proposes a new adaptive control strategy that manages PEV charging/discharging for peak shaving and load leveling in a distribution grid. For accurate and high fidelity transportation mobility modeling, real vehicle driving test data are collected from the field. Considering the estimated total required PEV battery charging energy, the vehicle-to-grid capabilities of PEVs, and the forecasted non-PEV base load, a reference operating point for the grid is estimated. This reference operating point is updated once at the end of peak hours to guarantee a full final state-of-charge to each PEV. Proposed method provides cost-efficient operation for the utility grid, utmost user convenience free from range anxiety, and ease of implementation at the charging station nodes. It is tested on a real residential transformer, which serves approximately one thousand customers, under various PEV penetration levels and charging scenarios. Performance is assessed in terms of mean-square-error and peak shaving index. Results are compared with those of various reference operating point choices and shown to be superior
Examination of a PHEV bidirectional charger system for V2G reactive power compensation
Abstract—Plug-in hybrid electric vehicles (PHEVs) potentially have the capability to fulfill the energy storage needs of the electric grid by supplying ancillary services such as reactive power compensation, voltage regulation, and peak shaving. However, in order to allow bidirectional power transfer, the PHEV battery charger should be designed to manage such capability. While many different battery chargers have been available since the inception of the first electric vehicles (EVs), on-board, conductive chargers with bidirectional power transfer capability have recently drawn attention due to their inherent advantages in charging accessibility, ease of use, and efficiency. In this paper, a reactive power compensation case study using just the inverter dc-link capacitor is evaluated when a PHEV battery is under charging operation. Finally, the impact of providing these services on the batteries is also explained
PHEV-EV Charger Technology Assessment with an Emphasis on V2G Operation
More battery powered electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEVs) will be introduced to the market in 2011 and beyond. Since these vehicles have large batteries that need to be charged from an external power source or directly from the grid, their batteries, charging circuits, charging stations/infrastructures, and grid interconnection issues are garnering more attention. This report summarizes information regarding the batteries used in PHEVs, different types of chargers, charging standards and circuits, and compares different topologies. Furthermore, it includes a list of vehicles that are going to be in the market soon with information on their charging and energy storage equipment. A summary of different standards governing charging circuits and charging stations concludes the report. There are several battery types that are available for PHEVs; however, the most popular ones have nickel metal hydride (NiMH) and lithium-ion (Li-ion) chemistries. The former one is being used in current hybrid electric vehicles (HEVs), but the latter will be used in most of the PHEVs and EVs due to higher energy densities and higher efficiencies. The chargers can be classified based on the circuit topologies (dedicated or integrated), location of the charger (either on or off the vehicle), connection (conductive, inductive/wireless, and mechanical), electrical waveform (direct current (dc) or alternating current (ac)), and the direction of power flow (unidirectional or bidirectional). The first PHEVs typically will have dedicated, on-board, unidirectional chargers that will have conductive connections to the charging stations or wall outlets and will be charged using either dc or ac. In the near future, bidirectional chargers might also be used in these vehicles once the benefits of practical vehicle to grid applications are realized. The terms charger and charging station cause terminology confusion. To prevent misunderstandings, a more descriptive term of electric vehicle supply equipment (EVSE) is used instead of charging station. The charger is the power conversion equipment that connects the battery to the grid or another power source, while EVSE refers to external equipment between the grid or other power source and the vehicle. EVSE might include conductors, connectors, attachment plugs, microprocessors, energy measurement devices, transformers, etc. Presently, there are more than 40 companies that are producing EVSEs. There are several standards and codes regarding conductive and inductive chargers and EVSEs from the Society of Automotive Engineers (SAE), the Underwriter Laboratories (UL), the International Electrotechnical Commission (IEC), and the National Electric Code (NEC). The two main standards from SAE describe the requirements for conductive and inductive coupled chargers and the charging levels. For inductive coupled charging, three levels are specified: Level 1 (120 V and 12 A, single-phase), Level 2 (208 V-240 V and 32 A, single-phase), and Level 3 (208-600 V and 400 A, three-phase) . The standard for the conductive-coupled charger also has similar charging ratings for Levels 1 and 2, but it allows higher current ratings for Level 2 charging up to 80 A. Level 3 charging for this standard is still under development and considers dc charging instead of three-phase ac. More details in these areas and related references can be found in this Oak Ridge National Laboratory (ORNL) report on PHEV-EV charger technology assessment
Real-time simulation of EV grid integration with internet-inspired charging control
Analyzing realistic EV-grid integration (EVGI) with available simulation tools is cumbersome due to the software overhead associated with offline simulation. Alternatively, real-time hardware platforms are becoming convenient means for testing and evaluating systems before field implementation. This study presents a digital implementation of an EVGI model in real-time on a multi-core processor based simulation platform. Furthermore, an Interned-inspired EV charging control algorithm is proposed in a decentralized fashion to prevent congestion related problems in a residential distribution grid. The impact of the proposed EV charging control on the IEEE 37-node test system is evaluated through the real-time analysis. The developed controller results show promise for extension to any utility-interfaced power electronics system. Real-time simulation implementation requirements and challenges in the context of EVGI are also discussed
Data-driven, Internet-inspired, and Scalable EV Charging for Power Distribution Grid
Electric vehicles (EVs) are finally making their way onto the roads. However,
the challenges concerning their long charging times and their impact on
congestion of the power distribution grid are still waiting to be resolved.
With historical measurement data, EV chargers can take better-informed actions
while staying mostly off-line. Proposed solutions that depend on heavy
communication and rigorous computation for optimal operation are not scalable.
The solutions that do not depend on power distribution topology information,
such as Droop control, are more practical as they only use local measurements.
However, they result in sub-optimal operation due to a lack of a feedback
mechanism. This study develops a distributed and data-driven congestion
detection methodology embedded in the Additive Increase Multiplicative Decrease
(AIMD) algorithm to control mass EV charging in a distribution grid. The
proposed distributed AIMD algorithm performs very closely to the ideal AIMD
regarding fairness and congestion handling. Its communication need is almost as
low as the Droop control. The results can provide crucial insights on how we
can use data to reveal the inner dynamics and structure of the power grid and
help develop more advanced data-driven algorithms for grid-integrated power
electronics control.Comment: This work has been submitted to the IEEE Open Access Journal of Power
and Energy (OAJPE) and is currently under revie
Effects of V2G reactive power compensation on the component selection in an EV or PHEV bidirectional charger
Abstract- Electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEVs) are becoming a part of the electric grid day by day. Chargers for these vehicles have the ability to make this interaction better for the consumer and for the grid. Vehicle to grid (V2G) power transfer has been under research for more than a decade because of the large energy reserve of an electric vehicle battery and the potential of thousands of these connected to the grid. Rather than discharging the vehicle batteries, reactive power compensation in particular is beneficial for both consumers and for the utility. However, certain adverse effects or requirements of reactive power transfer should be defined before a design stage. To understand the dynamics of this operation, this study investigates the effect of reactive power transfer on the charger system components, especially on the dc-link capacitor and the battery. Index Terms-Battery, bidirectional charger, charger, electric vehicle, EV, PHEV, reactive power, V2G. I. NOMENCLATURE V de (t) instantaneous dc link voltage, [V] Vde average dc link voltage [V], L1Vde peak-to-peak dc ripple voltage [V], C de dc link capacitor [F]. ve(t) instantaneous charger voltage [V], Ve rms charger input voltage [V] V S (t) instantaneous line voltage [V], Vs rms line voltage [V], ie (t) instantaneous charger current [A], I e rms line current [A], i eonv (t) instantaneous dc-dc converter input current [A], I eonv average bidirectional converter input current [A], i de (t) inverter output current on the dc side [A], i cap (t) instantaneous dc link capacitor current [A], l eap rms dc link capacitor current [A], I eap,low rms low harmonic current of dc capacitor [A]
Recommended from our members
PHEV-EV Charger Technology Assessment with an Emphasis on V2G Operation
More battery powered electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEVs) will be introduced to the market in 2011 and beyond. Since these vehicles have large batteries that need to be charged from an external power source or directly from the grid, their batteries, charging circuits, charging stations/infrastructures, and grid interconnection issues are garnering more attention. This report summarizes information regarding the batteries used in PHEVs, different types of chargers, charging standards and circuits, and compares different topologies. Furthermore, it includes a list of vehicles that are going to be in the market soon with information on their charging and energy storage equipment. A summary of different standards governing charging circuits and charging stations concludes the report. There are several battery types that are available for PHEVs; however, the most popular ones have nickel metal hydride (NiMH) and lithium-ion (Li-ion) chemistries. The former one is being used in current hybrid electric vehicles (HEVs), but the latter will be used in most of the PHEVs and EVs due to higher energy densities and higher efficiencies. The chargers can be classified based on the circuit topologies (dedicated or integrated), location of the charger (either on or off the vehicle), connection (conductive, inductive/wireless, and mechanical), electrical waveform (direct current (dc) or alternating current (ac)), and the direction of power flow (unidirectional or bidirectional). The first PHEVs typically will have dedicated, on-board, unidirectional chargers that will have conductive connections to the charging stations or wall outlets and will be charged using either dc or ac. In the near future, bidirectional chargers might also be used in these vehicles once the benefits of practical vehicle to grid applications are realized. The terms charger and charging station cause terminology confusion. To prevent misunderstandings, a more descriptive term of electric vehicle supply equipment (EVSE) is used instead of charging station. The charger is the power conversion equipment that connects the battery to the grid or another power source, while EVSE refers to external equipment between the grid or other power source and the vehicle. EVSE might include conductors, connectors, attachment plugs, microprocessors, energy measurement devices, transformers, etc. Presently, there are more than 40 companies that are producing EVSEs. There are several standards and codes regarding conductive and inductive chargers and EVSEs from the Society of Automotive Engineers (SAE), the Underwriter Laboratories (UL), the International Electrotechnical Commission (IEC), and the National Electric Code (NEC). The two main standards from SAE describe the requirements for conductive and inductive coupled chargers and the charging levels. For inductive coupled charging, three levels are specified: Level 1 (120 V and 12 A, single-phase), Level 2 (208 V-240 V and 32 A, single-phase), and Level 3 (208-600 V and 400 A, three-phase) . The standard for the conductive-coupled charger also has similar charging ratings for Levels 1 and 2, but it allows higher current ratings for Level 2 charging up to 80 A. Level 3 charging for this standard is still under development and considers dc charging instead of three-phase ac. More details in these areas and related references can be found in this Oak Ridge National Laboratory (ORNL) report on PHEV-EV charger technology assessment