Association of dentoskeletal morphology with incisor inclination in angle class II patients: a retrospective cephalometric study

Introduction: The purpose of this study was to identify possible dentoskeletal parameters associated with variation of anterior tooth inclination in Angle Class II subdivisions. Methods: Pre-treatment lateral radiographs of 144 Class II patients (68 males, 76 females) aged 9 to 17 years were classified for upper incisor inclination into three groups (proclined, normally inclined, retroclined) homogeneous for gender and skeletal jaw relationship. The effect of age on the 22 cephalometric variables was controlled by covariance analysis. Results: Multivariate analysis of the cephalometric parameters indicated significant inter-group differences. Systematic associations with incisor inclination were revealed using rank correlation: Lower incisor proclination, Wits appraisal and gonial angle significantly decreased (0.04 ≥ p ≥ 0.002), while intercisal angle, mandibular total and corpus length and nasolabial angle increased (0.04 ≥ p ≥ 0.001) with decreasing incisor proclination. Conclusions: Clear-cut classification criteria and control of confounding effects may clarify conflicting previous findings on dentoskeletal differences between Class II subdivisions in the mixed dentition. Only minor dentoskeletal differences appear to be associated with incisor inclination. The increased interincisal and nasolabial angle in Class II division 2 subjects are due to reclination of both upper and lower incisors. Jaw positions and chin prominence are not significantly different between the subdivisions. However, Wits appraisal is decreased in Class II division 2. The increased mandibular length observed in Class II division 2 requires further scrutinization.<br

Psychological profile and self-administered relaxation in patients with craniofacial pain: a prospective in-office study

Introduction: The objective of this study was to evaluate the psychological profile of craniofacial pain sufferers and the impact of patient subtype classification on the short-time effectiveness of a self-administered relaxation training. Methods: One hundred unselected in-office patients (67% females) suffering from chronic facial pain and/or headache with the presumptive diagnose of temporo-mandibular disorder (TMD) completed a questionnaire battery comprising craniofacial pain perception, somatic complaints, irrational beliefs, and pain behavior and were classified into subtypes using cluster analysis. They underwent a self-administered progressive relaxation training and were re-evaluated for pain perception after 3 months. Results: Pain was mild to moderate in the majority of patients. Symptom domains comprised parafunctional activities, temporo-mandibular pain and dysfunction, fronto-temporal headache, head/neck and neck/back pain. Three patient subtypes were identified regarding symptom/dysfunction level: (i) low burden (mild/moderate), (ii) psychosocial dysfunction (moderate/high), (iii) adaptive coping (moderate/mild). Self-rated adherence to the recommended relaxation training was moderate throughout the sample, but self-rated relief was significantly different between clusters. At follow-up, pain intensity was significantly decreased in all patients, whereas pain-related interference was improved only in dysfunctional and adaptive patients. Improvement of symptom domains varied between clusters and was most comprehensive in adaptive patients. Conclusions: In conclusion, craniofacial pain sufferers can be divided in meaningful subtypes based on their pain perception, irrational beliefs, and pain behaviour. A self-administered relaxation training generally yielded positive effects on pain perception, however the benefit may be greater in patients with more marked symptom impact (both dysfunctional and adaptive).<br

The role of mechanotransduction versus hypoxia during simulated orthodontic compressive strain—an in vitro study of human periodontal ligament fibroblasts

During orthodontic tooth movement (OTM) mechanical forces trigger pseudo-inflammatory, osteoclastogenic and remodelling processes in the periodontal ligament (PDL) that are mediated by PDL fibroblasts via the expression of various signalling molecules. Thus far, it is unknown whether these processes are mainly induced by mechanical cellular deformation (mechanotransduction) or by concomitant hypoxic conditions via the compression of periodontal blood vessels. Human primary PDL fibroblasts were randomly seeded in conventional six-well cell culture plates with O-2-impermeable polystyrene membranes and in special plates with gas-permeable membranes (Lumox (R), Sarstedt), enabling the experimental separation of mechanotransducive and hypoxic effects that occur concomitantly during OTM. To simulate physiological orthodontic compressive forces, PDL fibroblasts were stimulated mechanically at 2 g.cm(-2) for 48 h after 24 h of pre-incubation. We quantified the cell viability by MTT assay, gene expression by quantitative real-time polymerase chain reaction (RT-qPCR) and protein expression by western blot/enzyme-linked immunosorbent assays (ELISA). In addition, PDL-fibroblast-mediated osteoclastogenesis (TRAP(+) cells) was measured in a 72-h coculture with RAW264.7 cells. The expression of HIF-1 alpha, COX-2, PGE2, VEGF, COL1A2, collagen and ALPL, and the RANKL/OPG ratios at the mRNA/protein levels during PDL-fibroblast-mediated osteoclastogenesis were significantly elevated by mechanical loading irrespective of the oxygen supply, whereas hypoxic conditions had no significant additional effects. The cellular-molecular mediation of OTM by PDL fibroblasts via the expression of various signalling molecules is expected to be predominantly controlled by the application of force (mechanotransduction), whereas hypoxic effects seem to play only a minor role. In the context of OTM, the hypoxic marker HIF-1 alpha does not appear to be primarily stabilized by a reduced O-2 supply but is rather stabilised mechanically

Physical mechanisms of ESCRT-III-driven cell division

Living systems propagate by undergoing rounds of cell growth and division. Cell division is at heart a physical process that requires mechanical forces, usually exerted by assemblies of cytoskeletal polymers. Here we developed a physical model for the ESCRT-III-mediated division of archaeal cells, which despite their structural simplicity share machinery and evolutionary origins with eukaryotes. By comparing the dynamics of simulations with data collected from live cell imaging experiments, we propose that this branch of life uses a previously unidentified division mechanism. Active changes in the curvature of elastic cytoskeletal filaments can lead to filament perversions and supercoiling, to drive ring constriction and deform the overlying membrane. Abscission is then completed following filament disassembly. The model was also used to explore how different adenosine triphosphate (ATP)-driven processes that govern the way the structure of the filament is changed likely impact the robustness and symmetry of the resulting division. Comparisons between midcell constriction dynamics in simulations and experiments reveal a good agreement with the process when changes in curvature are implemented at random positions along the filament, supporting this as a possible mechanism of ESCRT-III-dependent division in this system. Beyond archaea, this study pinpoints a general mechanism of cytokinesis based on dynamic coupling between a coiling filament and the membrane

The patterned assembly and stepwise Vps4-mediated disassembly of composite ESCRT-III polymers drives archaeal cell division

ESCRT-III family proteins form composite polymers that deform and cut membrane tubes in the context of a wide range of cell biological processes across the tree of life. In reconstituted systems, sequential changes in the composition of ESCRT-III polymers induced by the AAA-adenosine triphosphatase Vps4 have been shown to remodel membranes. However, it is not known how composite ESCRT-III polymers are organized and remodeled in space and time in a cellular context. Taking advantage of the relative simplicity of the ESCRT-III-dependent division system in Sulfolobus acidocaldarius, one of the closest experimentally tractable prokaryotic relatives of eukaryotes, we use super-resolution microscopy, electron microscopy, and computational modeling to show how CdvB/CdvB1/CdvB2 proteins form a precisely patterned composite ESCRT-III division ring, which undergoes stepwise Vps4-dependent disassembly and contracts to cut cells into two. These observations lead us to suggest sequential changes in a patterned composite polymer as a general mechanism of ESCRT-III-dependent membrane remodeling. </p

Association between genetic variants in key vitamin‐D‐pathway genes and external apical root resorption linked to orthodontic treatment

This study evaluated the association between single-nucleotide polymorphisms (SNPs) in vitamin-D-related genes and the amount of external apical root resorption linked to orthodontic treatment. One hundred and forty-three individuals were assessed. The amount of external apical root resorption of upper central incisors (EARRinc) and lower first molars (EARRmol) were evaluated in radiographs. Seven SNPs were genotyped across four genes including the vitamin D receptor [VDR], group-specific component [GC], cytochrome P450 family 27 subfamily B member 1 [CYP27B1], and cytochrome P450 family 24 subfamily A member 1 [CYP24A1]. Linear regressions were implemented to determine allele-effects on external apical root resorption. Individuals carrying the AA genotype in VDR rs2228570 had a 21% higher EARRmol than those having AG and GG genotypes (95% CI: 1.03,1.40). EARRmol in heterozygous rs2228570, was 12% lower than for homozygotes (95%CI: 0.78,0.99). Participants with the CCG haplotype (rs1544410-rs7975232-rs731236) in VDR had an EARRmol 16% lower than those who did not carry this haplotype. Regarding CYP27B1 rs4646536, EARRinc in participants who had at least one G allele was 42% lower than for homozygotes AA (95%CI: 0.37,0.93). Although these results did not remain significant after multiple testing adjustment, potential associations may still be suggested. Further replication studies are needed to confirm or refute these findings

The investigation of WNT6 and WNT10A single nucleotide polymorphisms as potential biomarkers for dental pulp calcification in orthodontic patients

The aim of this study is to evaluate if single nucleotide polymorphisms (SNPs) in WNT6 and WNT10A are associated with the risk of dental pulp calcification in orthodontic patients. This cross-sectional study followed the “Strengthening the Reporting of Genetic Association Studies” (STREGA) guidelines. Panoramic radiographs (pre- and post-orthodontic treatment) and genomic DNA from 132 orthodontic patients were studied. Dental pulp calcification (pulp stones and/or pulp space narrowing) was recorded in upper and lower first molars. The SNPs in WNT6 and WNT10A (rs7349332, rs3806557, rs10177996, and rs6754599) were assessed through genotyping analysis using DNA extracted from buccal epithelial cells. The association between pulp calcification and SNPs were analyzed using allelic and genotypic distributions and haplotype frequencies (p<0.05). Prevalence of dental pulp calcification was 42.4% in the 490 studied molars. In the genotypic analysis, the SNPs in WNT10A showed a statistically significant value for molar calcification (p = 0.027 for rs1017799), upper molar calcification (p = 0.040 for rs1017799) (recessive model), and molar calcification (p = 0.046 for rs3806557) (recessive model). In the allelic distribution, the allele C of the SNP rs10177996 in WNT10A was associated with molar calcifications (p = 0.042) and with upper first molar calcification (p = 0.035). Nine combinations of haplotypes showed statistically significant value (p<0.05). The findings of this study indicates that SNPs in WNT10A and WNT6 are associated with dental pulp calcification in molars after orthodontic treatment and may be considered as biomarkers for dental pulp calcification

Post-treatment changes in permanent retention

OBJECTIVES While permanent retention is today the method of choice to stabilize orthodontic treatment outcomes, recent studies have increasingly reported posttreatment changes in tooth position during permanent retention. We conducted this study to analyze changes in the anterior mandible, whether the changes follow an underlying movement pattern, and, aiming for a preventive strategy, whether any risk factors could be identified comparing findings with the pretreatment situations. METHODS We included 30 patients who had worn fixed Twistflex retainers (UK 3-3) extending from canine to canine in the mandible. Casts reflecting the intraoral situations before orthodontic treatment (T0), directly after completion of active therapy (T1), and 6 months later (T2) were scanned and superimposed using Imageware Surfacer software. Posttreatment changes (T2-T1) of tooth position within the retainer block were analyzed on 3D virtual models and were compared to pretreatment (T0) and treatment-related (T1-T0) findings to identify potential risk factors. RESULTS Almost all analyzed patients revealed three-dimensional changes in tooth position within the retainer block. Comparing these movements, we repeatedly found rotated retainer blocks in labio-oral direction, while the center of rotation was located at the first incisors. This pattern was associated with intercanine expansion and excessive overjet correction during orthodontic treatment. The canines underwent the most pronounced (rotational and translational) movements. CONCLUSIONS In general permanent lingual retainers are safe but in special clinical cases retainers can induce undesired tooth movement. Risk factors seem to be intercanine expansion and excessive overjet correction during orthodontic treatment. In specific cases an additional retention device might be needed