437 research outputs found
Efficient fiber Bragg grating and fiber Fabry-Pe'rot sensor multiplexing scheme using a broadband pulsed mode-locked laser
A pulsed broadband mode-locked laser (MLL) combined with interferometric interrogation is shown to yield an efficient means of multiplexing a large number of fiber Bragg grating (FBG) or fiber Fabry-Perot (FFP) strain sensors with high performance. System configurations utilizing time division multiplexing (TDM) permit high resolution, accuracy, and bandwidth strain measurements along with high sensor densities. Strain resolutions of 23-60 n epsilon/Hz(1/2) at frequencies up to 800 Hz (expandable to 139 kHz) and a differential strain-measurement accuracy of +/- 1 mu epsilon are demonstrated. Interrogation of a low-finesse FFP sensor is also demonstrated, from which a strain resolution of 2 n epsilon/Hz(1/2) and strain-measurement accuracy of +/- 31 n epsilon are achieved. The system has the capability of interrogating well in excess of 50 sensors per fiber depending on crosstalk requirements. A discussion on sensor spacing, bandwidth, dynamic range, and measurement accuracy is also given
Rapid characterization of the ultraviolet induced fiber Bragg grating complex coupling coefficient as a function of irradiance and exposure time
We report the application of optical frequency domain reflectometry and a discrete-layer-peeling inverse scattering algorithm to the spatial characterization of the UV induced complex coupling coefficient during fiber Bragg grating growth. The fiber grating is rapidly characterized using this technique to give irradiance dependent growth as a function of exposure time, thereby providing the complete characterization of the coupling coefficient in the form of a "growth surface," which is related to the fiber's photosensitivity. We compare measurements of fiber Bragg grating growth in SMF-28 when exposed to continuous wave 244 nm irradiation from 0 to 90 W cm(-2) for exposure times up to 3230 s with a selection of other fibers including high germanium concentration fiber and erbium doped fiber. (c) 2007 Optical Society of America
Efficient large-scale multiplexing of fiber Bragg grating and fiber Fabry-Perot sensors for structural health monitoring applications
Fiber Bragg gratings have been demonstrated as a versatile sensor for structural health monitoring. We present an efficient and cost effective multiplexing method for fiber Bragg grating and fiber Fabry-Perot sensors based on a broadband mode-locked fiber laser source and interferometric interrogation. The broadband, pulsed laser source permits time and wavelength division multiplexing to be employed to achieve very high sensor counts. Interferometric interrogation also permits high strain resolutions over large frequency ranges to be achieved. The proposed system has the capability to interrogate several hundred fiber Bragg gratings or fiber Fabry-Perot sensors on a single fiber, whilst achieving sub-microstrain resolution over bandwidths greater than 100 kHz. Strain resolutions of 30n epsilon/Hz(1/2) and 2 n epsilon/Hz(1/2) are demonstrated with the fiber Bragg grating and fiber Fabry-Perot sensor respectively. The fiber Fabry-Perot sensor provides an increase in the strain resolution over the fiber Bragg grating sensor of greater than a factor of 10. The fiber Bragg gratings are low reflectivity and could be fabricated during the fiber draw process providing a cost effective method for array fabrication. This system would find applications in several health monitoring applications where large sensor counts are necessary, in particular acoustic emission
Polarization properties of interferometrically interrogated fiber Bragg grating and tandem-interferometer strain sensors
Lead sensitivity in low-coherence interferometric fiber-optic sensors is a well-known problem. It can lead to a severe degradation in the sensor resolution and accuracy through its effect on the fringe visibility and interferometric phase. These sensitivities have been attributed to birefringence in the various components. In the current work, an analysis of the polarization properties of fiber Bragg grating and tandem-interferometer strain sensors, using Stokes calculus and the Poincare sphere, is presented. The responses of these sensors as a function of the birefringence properties of the various components under different illuminating conditions are derived. The predicted responses demonstrate very good agreement with experimentally measured responses. These models provide a clear insight into the evolution of the polarization states through the sensor networks. Methods to overcome the lead sensitivity are discussed and demonstrated, which yield a differential strain measurement accuracy of 18 n epsilon - rms for a fiber Bragg grating sensor
Isolation and characterization of microsatellite loci from two inbreeding bark beetle species (Coccotrypes)
We developed 14 microsatellite markers in Coccotrypes carpophagus and 14 in C. dactyliperda.
These loci will be used for studying genetic structure and the level of inbreeding in
populations in the Canary Islands and Madeira. As a result of long-term inbreeding,
genetic variability is relatively low in these bark beetle species. We found one to five alleles
per locus in 29 C. carpophagus and 41 C. dactyliperda from various localities. Eleven of the
markers developed for C. carpophagus amplified in C. dactyliperda and seven of the markers
developed for C. dactyliperda amplified in C. carpophagus
Distribution and Host Plants of \u3ci\u3eCorthylus Punctatissimus\u3c/i\u3e (Coleoptera: Scolytidae) in the Lower Peninsula of Michigan
(excerpt)
The pitted ambrosia beetle. Corthylus punctatissimus Zimmerman, infests woody saplings and shrubs 14 mm in diameter or less. The beetle bores an entrance hole into the main stem at soil level and constructs a main gallery tunnel which generally spirals downward in the stem. Egg-niche construction is followed by inoculation of symbiotic fungi and oviposition. The main stem of the host tree wilts as a result of the girdling activity of the beetle. Finnegan (1967) described the life history of C. punctatissimus infesting Acer saccharum Marshall in Ontario and Quebec
The central theme of American agricultural history
"American agricultural history is not only the story of change. Tradition has also been important. An agrarian tradition took shape in the eighteenth and nineteenth centuries that exalted farming and rural life, looking upon them as having great importance for the nation's welfare."--First page.Richard S. Kirkendall*, Henry A. Wallace (Professor of History, Iowa State University)New 2/84/5
Ultra-high-sensitivity two-dimensional bend sensor
A multicore fibre Fabry-Perot-based strain sensor interrogated with tandem interferometry for bend measurement is described. Curvature in two dimensions is obtained by measuring the difference in strain between three co-located low finesse Fabry-Perot interferometers formed in each core of the fibre by pairs of Bragg gratings. This sensor provides a responsivity enhancement of up to 30 times that of a previously reported fibre Bragg grating based sensor. Strain resolutions of 0.6 n epsilon/Hz(1/2) above 1 Hz are demonstrated, which corresponds to a curvature resolution of similar to 0.012 km(-1)/Hz(1/2)
Understanding Remote Patient Monitoring as an Infrastructure Framework
Remote patient monitoring (RPM) refers to clinicians’ capabilities for maintaining and adjusting their patients’ plan of care by utilizing remotely gathered data such as vital signs to proactively make medical decisions that improve health outcomes and well-being. The focus of this healthcare capability has grown during the COVID-19 pandemic as it allows for patients to remain at home and thwart the spread of the highly contagious coronavirus and payee policies were quickly changed to adapt to the novel situation. We synthesize the literature and present a four-component digital infrastructure framework to think through the design and implementation of remote patient monitoring projects. We identify research questions that emerge from our description of each component. We believe this framework will be useful to research studying remote patient monitoring as it provides a holistic viewpoint of the technologies involved and how those core elements may interact
Extended Smoothed Boundary Method for Solving Partial Differential Equations with General Boundary Conditions on Complex Boundaries
In this article, we describe an approach for solving partial differential
equations with general boundary conditions imposed on arbitrarily shaped
boundaries. A continuous function, the domain parameter, is used to modify the
original differential equations such that the equations are solved in the
region where a domain parameter takes a specified value while boundary
conditions are imposed on the region where the value of the domain parameter
varies smoothly across a short distance. The mathematical derivations are
straightforward and generically applicable to a wide variety of partial
differential equations. To demonstrate the general applicability of the
approach, we provide four examples herein: (1) the diffusion equation with both
Neumann and Dirichlet boundary conditions; (2) the diffusion equation with both
surface diffusion and reaction; (3) the mechanical equilibrium equation; and
(4) the equation for phase transformation with the presence of additional
boundaries. The solutions for several of these cases are validated against
corresponding analytical and semi-analytical solutions. The potential of the
approach is demonstrated with five applications: surface-reaction-diffusion
kinetics with a complex geometry, Kirkendall-effect-induced deformation,
thermal stress in a complex geometry, phase transformations affected by
substrate surfaces, and a self-propelled droplet.Comment: This document is the revised version of arXiv:0912.1288v
- …