24 research outputs found
Recommended from our members
Bony ingrowth potential of 3D-printed porous titanium alloy: a direct comparison of interbody cage materials in an in vivo ovine lumbar fusion model.
Background contextThere is significant variability in the materials commonly used for interbody cages in spine surgery. It is theorized that three-dimensional (3D)-printed interbody cages using porous titanium material can provide more consistent bone ingrowth and biological fixation.PurposeThe purpose of this study was to provide an evidence-based approach to decision-making regarding interbody materials for spinal fusion.Study designA comparative animal study was performed.MethodsA skeletally mature ovine lumbar fusion model was used for this study. Interbody fusions were performed at L2-L3 and L4-L5 in 27 mature sheep using three different interbody cages (ie, polyetheretherketone [PEEK], plasma sprayed porous titanium-coated PEEK [PSP], and 3D-printed porous titanium alloy cage [PTA]). Non-destructive kinematic testing was performed in the three primary directions of motion. The specimens were then analyzed using micro-computed tomography (µ-CT); quantitative measures of the bony fusion were performed. Histomorphometric analyses were also performed in the sagittal plane through the interbody device. Outcome parameters were compared between cage designs and time points.ResultsFlexion-extension range of motion (ROM) was statistically reduced for the PTA group compared with the PEEK cages at 16 weeks (p-value=.02). Only the PTA cages demonstrated a statistically significant decrease in ROM and increase in stiffness across all three loading directions between the 8-week and 16-week sacrifice time points (p-value≤.01). Micro-CT data demonstrated significantly greater total bone volume within the graft window for the PTA cages at both 8 weeks and 16 weeks compared with the PEEK cages (p-value<.01).ConclusionsA direct comparison of interbody implants demonstrates significant and measurable differences in biomechanical, µ-CT, and histologic performance in an ovine model. The 3D-printed porous titanium interbody cage resulted in statistically significant reductions in ROM, increases in the bone ingrowth profile, as well as average construct stiffness compared with PEEK and PSP
Downloaded from
Background: Rotator cuff tears are a common source of shoulder pain. High rates (20%-94%) of structural failure of the repair have been attributed to multiple factors, including poor repair tissue quality and tendon-to-bone integration. Biologic augmentation using growth factors has potential to promote tendon-to-bone integration, improving the function and long-term success of the repair. One such growth factor is platelet-derived growth factor-BB (PDGF-BB), which has been shown to improve healing in tendon and bone repair models
Bony ingrowth potential of 3D-printed porous titanium alloy: a direct comparison of interbody cage materials in an in vivo ovine lumbar fusion model.
Matrix Metalloproteinase 9 (MMP-9) Regulates Vein Wall Biomechanics in Murine Thrombus Resolution
<div><p>Objective</p><p>Deep venous thrombosis is a common vascular problem with long-term complications including post-thrombotic syndrome. Post-thrombotic syndrome consists of leg pain, swelling and ulceration that is related to incomplete or maladaptive resolution of the venous thrombus as well as loss of compliance of the vein wall. We examine the role of metalloproteinase-9 (MMP-9), a gene important in extracellular remodeling in other vascular diseases, in mediating thrombus resolution and biomechanical changes of the vein wall.</p><p>Methods and Results</p><p>The effects of targeted deletion of MMP-9 were studied in an <i>in vivo</i> murine model of thrombus resolution using the FVB strain of mice. MMP-9 expression and activity significantly increased on day 3 after DVT. The lack of MMP-9 impaired thrombus resolution by 27% and this phenotype was rescued by the transplantation of wildtype bone marrow cells. Using novel biomechanical techniques, we demonstrated that the lack of MMP-9 significantly decreased thrombus-induced loss of vein wall compliance. Biomechanical analysis of the contribution of individual structural components showed that MMP-9 affected the elasticity of the extracellular matrix and collagen-elastin fibers. Biochemical and histological analyses correlated with these biomechanical effects as thrombi of mice lacking MMP-9 had significantly fewer macrophages and collagen as compared to those of wildtype mice.</p><p>Conclusions</p><p>MMP-9 mediates thrombus-induced loss of vein wall compliance by increasing stiffness of the extracellular matrix and collagen-elastin fibers during thrombus resolution. MMP-9 also mediates macrophage and collagen content of the resolving thrombus and bone-marrow derived MMP-9 plays a role in resolution of thrombus mass. These disparate effects of MMP-9 on various aspects of thrombus illustrate the complexity of individual protease function on biomechanical and morphometric aspects of thrombus resolution.</p></div
Kinetic analysis of anterior cervical discectomy and fusion supplemented with transarticular facet screws
Recommended from our members
Bony ingrowth potential of 3D-printed porous titanium alloy: a direct comparison of interbody cage materials in an in vivo ovine lumbar fusion model.
Background contextThere is significant variability in the materials commonly used for interbody cages in spine surgery. It is theorized that three-dimensional (3D)-printed interbody cages using porous titanium material can provide more consistent bone ingrowth and biological fixation.PurposeThe purpose of this study was to provide an evidence-based approach to decision-making regarding interbody materials for spinal fusion.Study designA comparative animal study was performed.MethodsA skeletally mature ovine lumbar fusion model was used for this study. Interbody fusions were performed at L2-L3 and L4-L5 in 27 mature sheep using three different interbody cages (ie, polyetheretherketone [PEEK], plasma sprayed porous titanium-coated PEEK [PSP], and 3D-printed porous titanium alloy cage [PTA]). Non-destructive kinematic testing was performed in the three primary directions of motion. The specimens were then analyzed using micro-computed tomography (µ-CT); quantitative measures of the bony fusion were performed. Histomorphometric analyses were also performed in the sagittal plane through the interbody device. Outcome parameters were compared between cage designs and time points.ResultsFlexion-extension range of motion (ROM) was statistically reduced for the PTA group compared with the PEEK cages at 16 weeks (p-value=.02). Only the PTA cages demonstrated a statistically significant decrease in ROM and increase in stiffness across all three loading directions between the 8-week and 16-week sacrifice time points (p-value≤.01). Micro-CT data demonstrated significantly greater total bone volume within the graft window for the PTA cages at both 8 weeks and 16 weeks compared with the PEEK cages (p-value<.01).ConclusionsA direct comparison of interbody implants demonstrates significant and measurable differences in biomechanical, µ-CT, and histologic performance in an ovine model. The 3D-printed porous titanium interbody cage resulted in statistically significant reductions in ROM, increases in the bone ingrowth profile, as well as average construct stiffness compared with PEEK and PSP
High bone microarchitecture, strength, and resistance to bone loss in MRL/MpJ mice correlates with activation of different signaling pathways and systemic factors
Biomechanical modeling of collagen and elastin (K1) from MMP-9<sup>+/+</sup> and MMP-9<sup>-/-</sup> mice (N = 8–12 per group; *,**,***p<0.05).
<p>Biomechanical modeling of collagen and elastin (K1) from MMP-9<sup>+/+</sup> and MMP-9<sup>-/-</sup> mice (N = 8–12 per group; *,**,***p<0.05).</p
Biomechanical modeling of extracellular matrix (C<sub>10</sub>) from MMP-9<sup>+/+</sup> and MMP-9<sup>-/-</sup> mice (N = 8–12 per group; *,**,***p<0.05).
<p>Biomechanical modeling of extracellular matrix (C<sub>10</sub>) from MMP-9<sup>+/+</sup> and MMP-9<sup>-/-</sup> mice (N = 8–12 per group; *,**,***p<0.05).</p
Biomechanical modeling of the three-dimensional alignment of fibers (κ) of the post-thrombotic vein wall in MMP-9<sup>+/+</sup> and MMP-9<sup>-/-</sup> mice (N = 8–12 per group; p = 0.72).
<p>Biomechanical modeling of the three-dimensional alignment of fibers (κ) of the post-thrombotic vein wall in MMP-9<sup>+/+</sup> and MMP-9<sup>-/-</sup> mice (N = 8–12 per group; p = 0.72).</p