3D Magnetic Analysis of the CMS Magnet

The CMS magnetic system consists of a super-conducting solenoid coil, 12.5 m long and 6 m free bore diameter, and of an iron flux-return yoke, which includes the central barrel, two end-caps and the ferromagnetic parts of the hadronic forward calorimeter. The magnetic flux density in the center of the solenoid is 4 T. To carry out the magnetic analysis of the CMS magnetic system, several 3D models were developed to perform magnetic field and force calculations using the Vector Fields code TOSCA. The analysis includes a study of the general field behavior, the calculation of the forces on the coil generated by small axial, radial displacements and angular tilts, the calculation of the forces on the ferromagnetic parts, the calculation of the fringe field outside the magnetic system, and a study of the field level in the chimneys for the current leads and the cryogenic lines. A procedure to reconstruct the field inside a cylindrical volume starting from the values of the magnetic flux density on the cylinder surface is considered. Special TOSCA-GEANT interface tools have being developed to input the calculated magnetic field into the detector simulation package.Comment: 4 pages, 6 figures, 1 equation, 14 reference

Hole-burning experiments within solvable glassy models

We reproduce the results of non-resonant spectral hole-burning experiments with fully-connected (equivalently infinite-dimensional) glassy models that are generalizations of the mode-coupling approach to nonequilibrium situations. We show that an ac-field modifies the integrated linear response and the correlation function in a way that depends on the amplitude and frequency of the pumping field. We study the effect of the waiting and recovery-times and the number of oscillations applied. This calculation will help descriminating which results can and which cannot be attributed to dynamic heterogeneities in real systems.Comment: 4 pages, 8 figures, RevTe

The superconducting strand for the CMS solenoid conductor

The Compact Muon Solenoid (CMS) is one of the general-purpose detectors to be provided for the LHC project at CERN. The design field of the CMS superconducting magnet is 4 T, the magnetic length is 12.5 m and the free bore is 6 m. Approximately 2000 km of superconducting strand is under procurement for the conductor of the CMS superconducting solenoid. Each strand length is required to be an integral multiple of 2.75 km. The strand is composed of copper- stabilized multifilamentary Nb-Ti with Nb barrier. Individual strands are identified by distinctive patterns of Nb-Ti filaments selected during stacking of the monofilaments. The statistics of piece length, measurements of I/sub c/, n-value, copper RRR, (Cu+Nb)/Nb-Ti ratio, as well as the results of independent cross checks of these quantities, are presented. A study was performed on the CMS strands to investigate the critical current degradation due to various heat treatments. The degradation versus annealing temperature and duration are reported. (4 refs)

Influence of oxygen ordering kinetics on Raman and optical response in YBa_2Cu_3O_{6.4}

Kinetics of the optical and Raman response in YBa_2Cu_3O_{6.4} were studied during room temperature annealing following heat treatment. The superconducting T_c, dc resistivity, and low-energy optical conductivity recover slowly, implying a long relaxation time for the carrier density. Short relaxation times are observed for the B_{1g} Raman scattering -- magnetic, continuum, and phonon -- and the charge transfer band. Monte Carlo simulations suggest that these two relaxation rates are related to two length scales corresponding to local oxygen ordering (fast) and long chain and twin formation (slow).Comment: REVTeX, 3 pages + 4 PostScript (compressed) figure

Status of the CMS magnet (MT17)

The CMS experiment (Compact Muon Solenoid) is a general-purpose detector designed to run at the highest luminosity at the CERN Large Hadron Collider (LHC). Its distinctive features include a 4 T superconducting solenoid with a free bore of 6 m diameter and 12.5-m length, enclosed inside a 10 000-ton return yoke. The magnet will be assembled and tested in a surface hall at Point 5 of the LHC at the beginning of 2004 before being transferred by heavy lifting means to an experimental hall 90 m below ground level. The design and construction of the magnet is a common project of the CMS Collaboration. The task is organized by a CERN based group with strong technical and contractual participation from CEA Saclay, ETH Zurich, Fermilab, INFN Genova, ITEP Moscow, University of Wisconsin and CERN. The magnet project will be described, with emphasis on the present status of the fabrication. (15 refs)

The BDSLD task: Summary and deliverables (Overview of EuroTeV results on the optical design of the Linear Collider Beam Delivery System)

This report is the deliverable of the EUROTeV Beam Delivery System Lattice Design (BDSLD) and gives an overview of the published results

On the stability of 2 \sqrt{2} x 2 \sqrt{2} oxygen ordered superstructures in YBa2Cu3O6+x

We have compared the ground-state energy of several observed or proposed " 2 \sqrt{2} x 2 \sqrt{2} oxygen (O) ordered superstructures " (from now on HS), with those of "chain superstructures" (CS) (in which the O atoms of the basal plane are ordered in chains), for different compositions x in YBa2Cu3O6+x. The model Hamiltonian contains i) the Madelung energy, ii) a term linear in the difference between Cu and O hole occupancies which controls charge transfer, and iii) covalency effects based on known results for $t-J$ models in one and two dimensions. The optimum distribution of charge is determined minimizing the total energy, and depends on two parameters which are determined from known results for x=1 and x=0.5. We obtain that on the O lean side, only CS are stable, while for x=7/8, a HS with regularly spaced O vacancies added to the x=1 structure is more stable than the corresponding CS for the same x. We find that the detailed positions of the atoms in the structure, and long-range Coulomb interactions, are crucial for the electronic structure, the mechanism of charge transfer, the stability of the different phases, and the possibility of phase separation.Comment: 24 text pages, Latex, one fig. included as ps file, to be publisheb in Phys. Rev.

Are women better mindreaders? Sex differences in neural correlates of mentalizing detected with functional MRI

<p>Abstract</p> <p>Background</p> <p>The ability to mentalize, i.e. develop a Theory of Mind (ToM), enables us to anticipate and build a model of the thoughts, emotions and intentions of others. It has long been hypothesised that women differ from men in their mentalizing abilities. In the present fMRI study we examined the impact of (1) gender (women vs. men) and (2) game partner (human vs. computer) on ToM associated neural activity in the medial prefrontal cortex. Groups of men (n = 12) and women (n = 12) interacted in an iterated classical prisoner's dilemma forced choice situation with alleged human and computer partners who were outside the scanner.</p> <p>Results</p> <p>Both the conditions of playing against putative human as well as computer partners led to activity increases in mPFC, ACC and rTPJ, constituting the classic ToM network. However, mPFC/ACC activity was more pronounced when participants believed they were playing against the alleged human partner. Differences in the medial frontal lobe activation related to the sex of the participants could be demonstrated for the human partner > computer partner contrast.</p> <p>Conclusion</p> <p>Our data demonstrate differences in medial prefrontal brain activation during a ToM task depending on both the gender of participants and the game partner.</p