Maximum thickness of a two-dimensional trapped Bose system

The trapped Bose system can be regarded as two-dimensional if the thermal fluctuation energy is less than the lowest energy in the perpendicular direction. Under this assumption, we derive an expression for the maximum thickness of an effective two-dimensional trapped Bose system.Comment: 1 pages, 0 figure

A Study on the Body Insulators for the Bushing for HTS Devices at Cryogenic Temperature

AbstractA bushing for high temperature superconducting devices (HTS bushing) is important because of applying high voltage to the cable or the winding of the transformer. It is cooled with liquid nitrogen (LN2) and is insulated with various insulators. For the development of the HTS bushing, it is necessary to know the fundamental characteristics of various insulators at cryogenic temperature.The electrical characteristics of the breakdown were studied under AC and impulse voltages. Also, the mechanical characteristics such as tensile strength in air and LN2 were studied. It was confirmed that GFRP is excellent not only electrical characteristics but also mechanical characteristics in LN2

Bioaccumulation surveillance in Milford Haven Waterway

Biomonitoring of contaminants (metals, organotins, PAHs, PCBs) was carried out along the Milford Haven Waterway (MHW) and at a reference site in the Tywi Estuary during 2007-2008. The species used as bioindicators encompass a variety of uptake routes - Fucus vesiculosus (dissolved contaminants); Littorina littorea (grazer); Mytilus edulis and Cerastoderma edule (suspension feeders); and Nereis diversicolor (omnivore which often reflects contaminants in sediment). Differences in feeding strategy and habitat preference have subtle implications for bioaccumulation trends though, with few exceptions, contaminant body burdens in Milford Haven (MH) were higher than those at the Tywi reference site, reflecting inputs. Elevated concentrations of metals were occasionally observed at individual MH sites, whilst As and Se (molluscs and seaweed) were, for much of MHW, consistently at the higher end of the UK range. However, for the majority of metals, distributions in MH biota were not exceptional by UK standards. Several metal-species combinations indicated increases in bioavailability at upstream sites, which may reflect the influence of geogenic or other land-based sources – perhaps enhanced by lower salinity (greater proportions of more bioavailable forms). TBT levels in MH mussels were below OSPAR toxicity thresholds and in the Tywi were close to zero. Phenyltins were not accumulated appreciably in Mytilus, whereas some Nereis populations may have been subjected to localized (historical) sources. PAHs in Nereis tended to be evenly distributed across most sites, but with somewhat higher values at Dale for acenaphthene, fluoranthene, pyrene, benzo(a)anthracene and chrysene; naphthalenes tended to be enriched further upstream in the mid-upper Haven (a pattern seen in mussels for most PAHs). Whilst concentrations in MH mussels were mostly above reference site and OSPAR backgrounds, it is unlikely that ecotoxicological guidelines would be exceeded. PCBs in mussels were between upper and lower OSPAR guidelines and were unusual in their distribution in that highest levels occurred at the mouth of MH. Condition indices (CI) of bivalves (mussels and cockles) were highest at the Tywi reference site and at the seaward end of MH, decreasing upstream along the Waterway. There were a number of significant (negative) relationships between CI and body burdens and multivariate analysis indicated that a combination of contaminants could influence the pattern in condition (and sub-lethal responses such as MT and TOSC) across sites. Cause and effect needs to be tested more rigorously in future assessments

Efficient Quantum Computation using Coherent States

Universal quantum computation using optical coherent states is studied. A teleportation scheme for a coherent-state qubit is developed and applied to gate operations. This scheme is shown to be robust to detection inefficiency.Comment: 6 pages, 5 figures, extended and modified (in print, PRA

Ratios of Elastic Scattering of Pions from 3H and 3He

We have measured the elastic-scattering ratios of normalized yields for charged pions from 3H and 3He in the backward hemisphere. At 180 MeV, we completed the angular distribution begun with our earlier measurements, adding six data points in the angular range of 119 deg to 169 deg in the pi-nucleus center of mass. We also measured an excitation function with data points at 142, 180, 220, and 256 MeV incident pion energy at the largest achievable angle for each energy between 160 deg and 170 deg in the pi-nucleus center of mass. This excitation function corresponds to the energies of our forward-hemisphere studies. The data, taken as a whole, show an apparent role reversal of the two charge-symmetric ratios r1 and r2 in the backward hemisphere. Also, for data > 100 deg we observe a strong dependence on the four-momentum transfer squared (-t) for all of the ratios regardless of pion energy or scattering angle, and we find that the superratio R data match very well with calculations based on the forward-hemisphere data that predicts the value of the difference between the even-nucleon radii of 3H and 3He. Comparisons are also made with recent calculations incorporating different wave functions and double scattering models.Comment: RevTex 8pages, 12 figure file

Sample-to-sample torque fluctuations in a system of coaxial randomly charged surfaces

Polarizable randomly charged dielectric objects have been recently shown to exhibit long-range lateral and normal interaction forces even when they are effectively net neutral. These forces stem from an interplay between the quenched statistics of random charges and the induced dielectric image charges. This type of interaction has recently been evoked to interpret measurements of Casimir forces in vacuo, where a precise analysis of such disorder-induced effects appears to be necessary. Here we consider the torque acting on a randomly charged dielectric surface (or a sphere) mounted on a central axle next to another randomly charged surface and show that although the resultant mean torque is zero, its sample-to-sample fluctuation exhibits a long-range behavior with the separation distance between the juxtaposed surfaces and that, in particular, its root-mean-square value scales with the total area of the surfaces. Therefore, the disorder-induced torque between two randomly charged surfaces is expected to be much more pronounced than the disorder-induced lateral force and may provide an effective way to determine possible disorder effects in experiments, in a manner that is independent of the usual normal force measurement.Comment: 7 pages, 3 fig

Incremental learning with social media data to predict near real-time events

International audienceIn this paper, we focus on the problem of predicting some particular user activities in social media. Our challenge is to consider real events such as message posting to friends or forwarding received ones, connecting to new friends, and provide near real-time prediction of new events. Our approach is based on latent factor models which can exploit simultaneously the timestamped interaction information among users and their posted content information. We propose a simple strategy to learn incrementally the latent factors at each time step. Our method takes only recent data to update latent factor models and thus can reduce computational cost. Experiments on a real dataset collected from Twitter show that our method can achieve performances that are comparable with other state-of-the-art non-incremental techniques

Structural, Magnetic and Transport Properties of B-Site Substituted Perovskite La0.7Sr0.3MnO3

In this chapter, in order to understand the structural related magnetic and transport properties of B site substituted perovskites La0.7Sr0.3MnO3 (LSMO), we have systematically investigated the effects of replacing some of the Mn with nonmagnetic elements Ti, Zr, Cu, Al, Zn and magnetic elements Co, Ni, Cr, Fe. The structural, magnetic and electrical phase transitions and transport properties of these compounds were investigated by neutron diffraction, magnetization and electric resistivity measurements

Effect of Phosphorus and Strontium Additions on Formation Temperature and Nucleation Density of Primary Silicon in Al-19 Wt Pct Si Alloy and Their Effect on Eutectic Temperature

The influence of P and Sr additions on the formation temperature and nucleation density of primary silicon in Al-19 wt pct Si alloy has been determined, for small volumes of melt solidified at cooling rates _T of ~0.3 and 1 K/s. The proportion of ingot featuring primary silicon decreased progressively with increased Sr addition, which also markedly reduced the temperature for first formation of primary silicon and the number of primary silicon particles per unit volume �Nv: When combined with previously published results, the effects of amount of P addition and cooling rate on �Nv are in reasonable accord with �Nv� _T ¼ ðp=6fÞ1=2 109 [250 � 215 (wt pct P)0.17]�3, where �Nv is in mm�3, _T is in K/s, and f is volume fraction of primary silicon. Increased P addition reduces the eutectic temperature, while increased Sr appears to generate a minimum in eutectic temperature at about 100 ppmw Sr