Controlling the structures of organic semiconductor–quantum dot nanocomposites through ligand shell chemistry

Nanocrystal quantum dots (QD) functionalised with active organic ligands hold significant promise as solar energy conversion materials, capable of multiexcitonic processes that could improve the efficiencies of single-junction photovoltaic devices. Small-angle X-ray and neutron scattering (SAXS and SANS) were used to characterize the structure of lead sulphide QDs post ligand-exchange with model acene-carboxylic acid ligands (benzoic acid, hydrocinnamic acid and naphthoic acid). Results demonstrate that hydrocinnamic acid and naphthoic acid ligated QDs form monolayer ligand shells, whilst benzoic acid ligated QDs possess ligand shells thicker than a monolayer. Further, the formation of a range of nanocomposite materials through the self-assembly of such acene-ligated QDs with an organic small-molecule semiconductor [5,12-bis((triisopropylsilyl)ethynyl)tetracene (TIPS-Tc)] is investigated. These materials are representative of a wider set of functional solar energy materials; here the focus is on structural studies, and their optoelectronic function is not investigated. As TIPS-Tc concentrations are increased, approaching the solubility limit, SANS data show that QD fractal-like features form, with structures possibly consistent with a diffusion limited aggregation mechanism. These, it is likely, act as heterogeneous nucleation agents for TIPS-Tc crystallization, generating agglomerates containing both QDs and TIPS-Tc. Within the TIPS-Tc crystals there seem to be three distinct QD morphologies: (i) at the crystallite centre (fractal-like QD aggregates acting as nucleating agents), (ii) trapped within the growing crystallite (giving rise to QD features ordered as sticky hard spheres), and (iii) a population of aggregate QDs at the periphery of the crystalline interface that were expelled from the growing TIPS-Tc crystal. Exposure of the QD:TIPS-Tc crystals to DMF vapour, a solvent known to be able to strip ligands from QDs, alters the spacing between PbS–hydrocinnamic acid and PbS–naphthoic acid ligated QD aggregate features. In contrast, for PbS–benzoic acid ligated QDs, DMF vapour exposure promotes the formation of ordered QD colloidal crystal type phases. This work thus demonstrates how different QD ligand chemistries control the interactions between QDs and an organic small molecule, leading to widely differing self-assembly processes. It highlights the unique capabilities of multiscale X-ray and neutron scattering in characterising such composite materials

Metal‐organic framework nanosheets as templates to enhance performance in semi‐crystalline organic photovoltaic cells

Optimizing the orientation, crystallinity, and domain size of components within organic photovoltaic (OPV) devices is key to maximizing their performance. Here a broadly applicable approach for enhancing the morphology of bulk heterojunction OPV devices using metal–organic nanosheets (MONs) as additives is demonstrated. It is shown that addition of porphyrin-based MONs to devices with fully amorphous donor polymers lead to small improvements in performance attributed to increased light absorption due to nanosheets. However, devices based on semi-crystalline polymers show remarkable improvements in power conversion efficiency (PCE), more than doubling in some cases compared to reference devices without nanosheets. In particular, this approach led to the development of PffBT4T2OD-MON-PCBM device with a PCE of 12.3%, which to the authors’ knowledge is the highest performing fullerene based OPV device reported in literature to date. Detailed analysis of these devices shows that the presence of the nanosheets results in a higher fraction of face-on oriented polymer crystals in the films. These results therefore demonstrate the potential of this highly tunable class of two-dimensional nanomaterials as additives for enhancing the morphology, and therefore performance, of semi-crystalline organic electronic devices

Influences of Non-fullerene Acceptor Fluorination on Three-Dimensional Morphology and Photovoltaic Properties of Organic Solar Cells

Fluorination of conjugated molecules has been established as an effective structural modification strategy to influence properties and has attracted extensive attention in organic solar cells (OSCs). Here, we have investigated optoelectronic and photovoltaic property changes of OSCs made of polymer donors with the non-fullerene acceptors (NFAs) ITIC and IEICO and their fluorinated counterparts IT-4F and IEICO-4F. Device studies show that fluorinated NFAs lead to reduced Voc but increased Jsc and fill-factor (FF), and therefore, the ultimate influence to efficiency depends on the compensation of Voc loss and gains of Jsc and FF. Fluorination lowers energy levels of NFAs, reduces their electronic band gaps, and red-shifts the absorption spectra. The impact of fluorination on the molecular order depends on the specific NFA, and the conversion of ITIC to IT-4F reduces the structural order, which can be reversed after blending with the donor PBDB-T. Contrastingly, IEICO-4F presents stronger π–π stacking after fluorination from IEICO, and this is further strengthened after blending with the donor PTB7-Th. The photovoltaic blends universally present a donor-rich surface region which can promote charge transport and collection toward the anode in inverted OSCs. The fluorination of NFAs, however, reduces the fraction of donors in this donor-rich region, consequently encouraging the intermixing of donor/acceptor for efficient charge generation

13.9% efficiency ternary nonfullerene organic solar cells featuring low-structural order

The insufficient phase separation between polymer donors and nonfullerene acceptors (NFAs) featuring low structural order disrupts efficient charge transport and increases charge recombination, consequently limiting the maximum achievable power conversion efficiency (PCE) of organic solar cells (OSCs). Herein, an NFA IT-M has been added as the third component into the PBDB-T:m-INPOIC OSCs and is shown to effectively tune the phase separation between donor and acceptor molecules, although all components in the ternary system exhibit low degrees of structural order. The incorporation of 10 wt % IT-M into a PBDB-T:m-INPOIC binary host blend appreciably increases the length scale of phase separation, creating continuous pathways that increase and balance charge transport. This leads to an enhanced photovoltaic performance from 12.8% in the binary cell to 13.9% for the ternary cell with simultaneously improved open-circuit voltage, short-circuit current, and fill factor. This work highlights the beneficial role of ternary components in controlling the morphology of the active layer for high-performance OSCs

Enhancing the efficiency of PTB7-Th:COi8DFIC-based ternary solar cells with versatile third components

Traditional single-junction binary organic solar cells suffer from narrow absorption windows, limiting their ability to harvest photons. One promising approach to avoid this issue is through the construction of a ternary system to enhance the spectral response and efficiency. However, the complex morphology and photophysical processes within ternary blends leave the criteria of an effective third component unclear, and so they remain a challenge. In this work, we report on the fabrication of PTB7-Th:COi8DFIC-based ternary solar cells with enhanced efficiency by employing either a polymer donor or a nonfullerene acceptor as the third component. We demonstrate that the third component is highly associated with the condensed state of the host acceptor and is the primary factor in determining efficiency improvement. The π-π stacking molecular packing of COi8DFIC helps to maintain the optimal phase separation within the ternary blends and improves both the hole and electron charge mobilities, resulting in enhanced power conversion efficiency of over 14%, compared to 13.1% in binary devices. We also found an excessive amount of polymer donor or nonfullerene acceptor increases the phase separation and encourages lamellar crystallization with the host acceptor domain, resulting in reduced light-harvesting and external quantum efficiencies at long wavelengths. Our results provide a rational guide to selecting the third component to fabricate high-performance nonfullerene-based ternary solar cells

Regulating the morphology of fluorinated non-fullerene acceptor and polymer donor via binary solvent mixture for high efficiency polymer solar cells

Fluorinated non-fullerene acceptors (NFAs) usually have planar backbone and a higher tendency to crystallize compared to their non-fluorinated counterparts, which leads to enhanced charge mobility in organic solar cells (OSCs). However, this self-organization behavior may result in excessive phase separation with electron donors and thereby deteriorate device efficiency. Herein, we demonstrate an effective approach to tune the molecular organization of a fluorinated NFA (INPIC-4F), and its phase separation with the donor PBDB-T, by varying the casting solvent. A prolonged film drying time encourages the crystallization of INPIC-4F into spherulites and consequently results in excessive phase separation, leading to a low device power conversion efficiency (PCE) of 8.1%. Contrarily, a drying time leads to fine mixed domains with inefficient charge transport properties, resulting in a moderate device PCE of 11.4%. An intermediate film drying time results in the formation of face-on π-π stacked PBDB-T and INPIC-4F domains with continuous phase-separated networks, which facilitates light absorption, exciton dissociation as well as balanced charge transport towards the electrode, and achieves a remarkable PCE of 13.1%. This work provides a rational guide for optimizing the molecular ordering of NFAs and electron donors for high device efficiency

Potassium iodide reduces the stability of triple-cation perovskite solar cells

The addition of alkali metal halides to hybrid perovskite materials can significantly impact their crystallisation and hence their performance when used in solar cell devices. Previous work on the use of potassium iodide (KI) in active layers to passivate defects in triple-cation mixed-halide perovskites has been shown to enhance their luminescence efficiency and reduce current–voltage hysteresis. However, the operational stability of KI passivated perovskite solar cells under ambient conditions remains largely unexplored. By investigating perovskite solar cell performance with SnO2 or TiO2 electron transport layers (ETL), we propose that defect passivation using KI is highly sensitive to the composition of the perovskite–ETL interface. We reconfirm findings from previous reports that KI preferentially interacts with bromide ions in mixed-halide perovskites, and – at concentrations >5 mol% in the precursor solution – modifies the primary absorber composition as well as leading to the phase segregation of an undesirable secondary non-perovskite phase (KBr) at high KI concentration. Importantly, by studying both material and device stability under continuous illumination and bias under ambient/high-humidity conditions, we show that this secondary phase becomes a favourable degradation product, and that devices incorporating KI have reduced stability

Exploring nanoscale structure in perovskite precursor solutions using neutron and light scattering

Tailoring the solution chemistry of metal halide perovskites requires a detailed understanding of precursor aggregation and coordination. In this work, we use various scattering techniques, including dynamic light scattering (DLS), small angle neutron scattering (SANS), and spin–echo SANS (SESANS) to probe the nanostructures from 1 nm to 10 μm within two different lead-halide perovskite solution inks (MAPbI3 and a triple-cation mixed-halide perovskite). We find that DLS can misrepresent the size distribution of the colloidal dispersion and use SANS/SESANS to confirm that these perovskite solutions are mostly comprised of 1–2 nm-sized particles. We further conclude that if there are larger colloids present, their concentration must be <0.005% of the total dispersion volume. With SANS, we apply a simple fitting model for two component microemulsions (Teubner–Strey), demonstrating this as a potential method to investigate the structure, chemical composition, and colloidal stability of perovskite solutions, and we here show that MAPbI3 solutions age more drastically than triple cation solutions

Rapid scalable processing of tin oxide transport layers for perovskite solar cells

The development of scalable deposition methods for perovskite solar cell materials is critical to enable the commercialization of this nascent technology. Herein, we investigate the use and processing of nanoparticle SnO2 films as electron transport layers in perovskite solar cells and develop deposition methods for ultrasonic spray coating and slot-die coating, leading to photovoltaic device efficiencies over 19%. The effects of postprocessing treatments (thermal annealing, UV ozone, and O2 plasma) are then probed using structural and spectroscopic techniques to characterize the nature of the np-SnO2/perovskite interface. We show that a brief “hot air flow” method can be used to replace extended thermal annealing, confirming that this approach is compatible with high-throughput processing. Our results highlight the importance of interface management to minimize nonradiative losses and provide a deeper understanding of the processing requirements for large-area deposition of nanoparticle metal oxides

Mixed small-molecule matrices improve nanoparticle dispersibility in organic semiconductor-nanoparticle films

Controlling the dispersibility of nanocrystalline inorganic quantum dots (QDs) within organic semiconductor (OSC):QD nanocomposite films is critical for a wide range of optoelectronic devices. This work demonstrates how small changes to the OSC host molecule can have a dramatic detrimental effect on QD dispersibility within the host organic semiconductor matrix as quantified by grazing incidence X-ray scattering. It is commonplace to modify QD surface chemistry to enhance QD dispersibility within an OSC host. Here, an alternative route toward optimizing QD dispersibilities is demonstrated, which dramatically improves QD dispersibilities through blending two different OSCs to form a fully mixed OSC matrix phase