30 research outputs found
Combining remote sensing techniques and field surveys for postâearthquake reconnaissance missions
Remote reconnaissance missions are promising solutions for the assessment of earthquake induced structural damage and cascading geological hazards. Space-borne remote sensing can complement in-field missions when safety and accessibility concerns limit post-earthquake operations on the ground. However, the implementation of remote sensing techniques in post-disaster missions is limited by the lack of methods that combine different techniques and integrate them with field survey data. This paper presents a new approach for rapid post-earthquake building damage assessment and landslide mapping, based on Synthetic Aperture Radar (SAR) data. The proposed texture-based building damage classification approach exploits very high resolution post-earthquake SAR data integrated with building survey data. For landslide mapping, a backscatter intensity-based landslide detection approach, which also includes the separation between landslides and flooded areas, is combined with optical-based manual inventories. The approach was implemented during the joint Structural Extreme Event Reconnaissance, GeoHazards International and Earthquake Engineering Field Investigation Team mission that followed the 2021 Haiti Earthquake and Tropical Cyclone Grace
Recommended from our members
Combining remote sensing techniques and field surveys for post-earthquake reconnaissance missions
Copyright © The Author(s) 2023. Remote reconnaissance missions are promising solutions for the assessment of earthquake-induced structural damage and cascading geological hazards. Space-borne remote sensing can complement in-field missions when safety and accessibility concerns limit post-earthquake operations on the ground. However, the implementation of remote sensing techniques in post-disaster missions is limited by the lack of methods that combine different techniques and integrate them with field survey data. This paper presents a new approach for rapid post-earthquake building damage assessment and landslide mapping, based on Synthetic Aperture Radar (SAR) data. The proposed texture-based building damage classification approach exploits very high resolution post-earthquake SAR data integrated with building survey data. For landslide mapping, a backscatter intensity-based landslide detection approach, which also includes the separation between landslides and flooded areas, is combined with optical-based manual inventories. The approach was implemented during the joint Structural Extreme Event Reconnaissance, GeoHazards International and Earthquake Engineering Field Investigation Team mission that followed the 2021 Haiti Earthquake and Tropical Cyclone Grace.VM was supported by the Dutch Research Council (NWO), project OCENW.XS5.114. StEER and GHI Data collection was supported by the National Science Foundation (NSF) under Grant CMMI-1841667, the U.S. Geological Survey (USGS) and the U.S. Agency for International Development (USAID), under USGS Cooperative Agreement No. G21AC10343-00 and USAID Award AID-OFDA-T-16-00001, under lead investigator Janise Rodgers
Lessons for Remote Post-earthquake Reconnaissance from the 14 August 2021 Haiti Earthquake
On 14th August 2021, a magnitude 7.2 earthquake struck the Tiburon Peninsula in the Caribbean nation of Haiti, approximately 150 km west of the capital Port-au-Prince.
Aftershocks up to moment magnitude 5.7 followed and over 1,000 landslides were triggered. These events led to over 2,000 fatalities, 15,000 injuries and more than 137,000 structural failures. The economic impact is of the order of US$1.6 billion. The on-going Covid pandemic and a complex political and security situation in Haiti meant that deploying earthquake engineers from the UK to assess structural damage and identify lessons for future building construction was impractical. Instead, the Earthquake
Engineering Field Investigation Team (EEFIT) carried out a hybrid mission, modelled on the previous EEFIT Aegean Mission of 2020. The objectives were: to use open-source information, particularly remote sensing data such as InSAR and Optical/Multispectral imagery, to characterise the earthquake and associated hazards; to understand the observed strong ground motions and compare these to existing seismic codes; to undertake remote structural damage assessments, and to evaluate the applicability of the techniques used for future post-disaster assessments. Remote structural damage assessments were conducted in collaboration with the Structural Extreme Events Reconnaissance (StEER) team, who mobilised a group of local non-experts to rapidly record building damage. The EEFIT team undertook damage assessment for over 2,000 buildings comprising schools, hospitals, churches and housing to investigate the impact of the earthquake on building typologies in Haiti. This paper summarises the mission setup and findings, and discusses the benefits, and difficulties, encountered during this hybrid
reconnaissance mission
Non-linear dynamic response of a cable system with a tuned mass damper to stochastic base excitation via equivalent linearization technique
Abstract: Non-linear dynamic model of a cableâmass system with a transverse tuned mass damper is considered. The system is moving in a vertical host structure therefore the cable length varies slowly over time. Under the time-dependent external loads the sway of host structure with low frequencies and high amplitudes can be observed. That yields the base excitation which in turn results in the excitation of a cable system. The original model is governed by a system of non-linear partial differential equations with corresponding boundary conditions defined in a slowly time-variant space domain. To discretise the continuous model the Galerkin method is used. The assumption of the analysis is that the lateral displacements of the cable are coupled with its longitudinal elastic stretching. This brings the quadratic couplings between the longitudinal and transverse modes and cubic nonlinear terms due to the couplings between the transverse modes. To mitigate the dynamic response of the cable in the resonance region the tuned mass damper is applied. The stochastic base excitation, assumed as a narrow-band process mean-square equivalent to the harmonic process, is idealized with the aid of two linear filters: one second-order and one first-order. To determine the stochastic response the equivalent linearization technique is used. Mean values and variances of particular random state variable have been calculated numerically under various operational conditions. The stochastic results have been compared with the deterministic response to a harmonic process base excitation
Lessons for Remote Post-earthquake Reconnaissance from the 14 August 2021 Haiti Earthquake
On 14th August 2021, a magnitude 7.2 earthquake struck the Tiburon Peninsula in the Caribbean nation of Haiti, approximately 150Â km west of the capital Port-au-Prince. Aftershocks up to moment magnitude 5.7 followed and over 1,000 landslides were triggered. These events led to over 2,000 fatalities, 15,000 injuries and more than 137,000 structural failures. The economic impact is of the order of US$1.6 billion. The on-going Covid pandemic and a complex political and security situation in Haiti meant that deploying earthquake engineers from the UK to assess structural damage and identify lessons for future building construction was impractical. Instead, the Earthquake Engineering Field Investigation Team (EEFIT) carried out a hybrid mission, modelled on the previous EEFIT Aegean Mission of 2020. The objectives were: to use open-source information, particularly remote sensing data such as InSAR and Optical/Multispectral imagery, to characterise the earthquake and associated hazards; to understand the observed strong ground motions and compare these to existing seismic codes; to undertake remote structural damage assessments, and to evaluate the applicability of the techniques used for future post-disaster assessments. Remote structural damage assessments were conducted in collaboration with the Structural Extreme Events Reconnaissance (StEER) team, who mobilised a group of local non-experts to rapidly record building damage. The EEFIT team undertook damage assessment for over 2,000 buildings comprising schools, hospitals, churches and housing to investigate the impact of the earthquake on building typologies in Haiti. This paper summarises the mission setup and findings, and discusses the benefits, and difficulties, encountered during this hybrid reconnaissance mission.</jats:p