18,162 research outputs found
Transmission Delay of Multi-hop Heterogeneous Networks for Medical Applications
Nowadays, with increase in ageing population, Health care market keeps
growing. There is a need for monitoring of Health issues. Body Area Network
consists of wireless sensors attached on or inside human body for monitoring
vital Health related problems e.g, Electro Cardiogram (ECG),
ElectroEncephalogram (EEG), ElectronyStagmography(ENG) etc. Data is recorded by
sensors and is sent towards Health care center. Due to life threatening
situations, timely sending of data is essential. For data to reach Health care
center, there must be a proper way of sending data through reliable connection
and with minimum delay. In this paper transmission delay of different paths,
through which data is sent from sensor to Health care center over heterogeneous
multi-hop wireless channel is analyzed. Data of medical related diseases is
sent through three different paths. In all three paths, data from sensors first
reaches ZigBee, which is the common link in all three paths. After ZigBee there
are three available networks, through which data is sent. Wireless Local Area
Network (WLAN), Worldwide Interoperability for Microwave Access (WiMAX),
Universal Mobile Telecommunication System (UMTS) are connected with ZigBee.
Each network (WLAN, WiMAX, UMTS) is setup according to environmental
conditions, suitability of device and availability of structure for that
device. Data from these networks is sent to IP-Cloud, which is further
connected to Health care center. Main aim of this paper is to calculate delay
of each link in each path over multihop wireless channel.Comment: BioSPAN with 7th IEEE International Conference on Broadband and
Wireless Computing, Communication and Applications (BWCCA 2012), Victoria,
Canada, 201
Simulation Analysis of Medium Access Techniques
This paper presents comparison of Access Techniques used in Medium Access
Control (MAC) protocol for Wireless Body Area Networks (WBANs). Comparison is
performed between Time Division Multiple Access (TDMA), Frequency Division
Multiple Access (FDMA), Carrier Sense Multiple Access with Collision Avoidance
(CSMA/CA), Pure ALOHA and Slotted ALOHA (S-ALOHA). Performance metrics used for
comparison are throughput (T), delay (D) and offered load (G). The main goal
for comparison is to show which technique gives highest Throughput and lowest
Delay with increase in Load. Energy efficiency is major issue in WBAN that is
why there is need to know which technique performs best for energy conservation
and also gives minimum delay.Comment: NGWMN with 7th IEEE International Conference on Broadband and
Wireless Computing, Com- munication and Applications (BWCCA 2012), Victoria,
Canada, 201
Trends in Competition and Profitability in the Banking Industry: A Basic Framework
This paper brings to the forefront the assumptions that we make when focusing on a particular type of explanation for bank profitability. We evaluate a broad field of research by introducing a general framework for a profit maximizing bank and demonstrate how different types of models can be fitted into this framework. Next, we present an overview of the current major trends in European banking and relate them to each model’s assumptions, thereby shedding light on the relevance, timeliness and shelf life of the different models. This way, we arrive at a set of recommendations for a future research agenda. We advocate a more prominent role for output prices, and suggest a modification of the intermediation approach. We also suggest ways to more clearly distinguish between market power and efficiency, and explain why we need time-dependent models. Finally, we propose the application of existing models to different size classes and sub-markets. Throughout we emphasize the benefits from applying several, complementary models to overcome the identification problems that we observe in individual models.
Negative index fishnet with nanopillars formed by direct nano-imprint lithography
In this paper we demonstrate the ability to fabricate fishnets by nanoimprinting directly into a pre-deposited three layer metal–dielectric–metal stack, enabling us to pattern large areas in two minutes. We have designed and fabricated two different fishnet structures of varying dimensions using this method and measured their resonant wavelengths in the near-infrared at 1.45 μm and 1.88 μm. An important by-product of directly imprinting into the metal–dielectric stack, without separation from the substrate, is the formation of rectangular nanopillars that sit within the rectangular apertures between the fishnet slabs. Simulations complement our measurements and suggest a negative refractive index real part with a magnitude of 1.6. Further simulations suggest that if the fishnet were to be detached from the supporting substrate a refractive index real part of 5 and FOM of 2.74 could be obtained
Dual-Band Bandpass Filter with Dumbbell Shaped Defective Ground Structure
A dumbbell shaped defective ground structure (DGS) is implemented to improve the performance of an existing dual-band bandpass filter topology. The filter design is based on parallel-coupled lines connected to matched transmission lines. Various positions and dimensions of dumbbell DGSs are implemented and their effects on the filter performance are investigated. It is found that the utilisation of dumbbell shaped DGSs in this topology improve the steepness of the responses for the first and second passbands with centre frequencies of 1.365 and 2.932 GHz respectively. The optimised dimensions of the DGS are 5 x 5 mm2 for both its rectangular slots connected by a 0.5 mm narrow slot width. The optimised positions of the DGSs are located at the centre and the edges of the parallel-coupled lines. The simulated and measured results of the filter are analysed and discussed in this paper
Comparative Analysis of V-Akt Murine Thymoma Viral Oncogene Homolog 3 (AKT3) Gene between Cow and Buffalo Reveals Substantial Differences for Mastitis
AKT3 gene is a constituent of the serine/threonine protein kinase family and plays a crucial role in synthesis of milk fats and cholesterol by regulating activity of the sterol regulatory element binding protein (SREBP). AKT3 is highly conserved in mammals and its expression levels during the lactation periods of cattle are markedly increased. AKT3 is highly expressed in the intestine followed by mammary gland and it is also expressed in immune cells. It is involved in the TLR pathways as effectively as proinflammatory cytokines. The aims of this study were to investigate the sequences differences between buffalo and cow. Our results showed that there were substantial differences between buffalo and cow in some exons and noteworthy differences of the gene size in different regions. We also identified the important consensus sequence motifs, variation in 2000 upstream of ATG, substantial difference in the “3′UTR” region, and miRNA association in the buffalo sequences compared with the cow. In addition, genetic analyses, such as gene structure, phylogenetic tree, position of different motifs, and functional domains, were performed to establish their correlation with other species. This may indicate that a buffalo breed has potential resistance to disease, environment changes, and airborne microorganisms and some good production and reproductive traits
Characterization of wheat varieties by seed storageprotein electrophoresis
Wheat grains of thirteen varieties were collected from different ecological regions of Pakistan. The variability of seed storage-proteins was analyzed by sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE). Electrophorogram for each variety were scored and Jaccard‘s similarity index (JSI) was calculated. Genetic diversity of wheat was evaluated by constructing the dendrogram for high molecular weight (HMW) and low molecular weight (LMW) gluten subunit bands. It is concludedthat seed storage protein profiles could be useful markers in the studies of genetic diversity and classification of adapted cultivars, thereby improving the efficiency of wheat breeding programs in cultivar development especially in a developing country like Pakistan
- …