Designs and Optical Tests of Thermal Links for an Optical Refrigerator

Dielectric mirror leakage at large angles of incidence limits the effectiveness of solid state optical refrigerators due to reheating caused by photon absorption in an attached load. In this paper, we present several thermally conductive link solutions to greatly reduce the net photon absorption. The Los Alamos Solid State Optical Refrigerator (LASSOR) has demonstrated cooling of a Yb/sup 3+/ doped ZBLANP glass to 208 K. We have designed optically isolating thermal link geometries capable of extending cooling to a typical heat load with minimal absorptive reheating, and we have tested the optical performance of these designs. A surrogate source operating at 625 nm was used to mimic the angular distribution of light from the LASSOR cooling element. While total link performance is dependent on additional factors, we have found that the best thermal link reduced the net transmission of photons to 0.04%, which includes the trapping mirrors 8.1% transmission. Our measurements of the optical performance of the various link geometries are supported by computer simulations of the designs using Code V, a commercially available optical modeling software package

Computer Modeling and Analysis of Thermal Link Performance for an Optical Refrigerator

We have used the thermal modeling tool in COMSOL Multiphysics to investigate factors that affect the thermal performance of the optical refrigerator. Assuming an ideal cooling element and a non-absorptive dielectric trapping mirror, the three dominant heating factors are blackbody radiation from the surrounding environment, conductive heat transfer through mechanical supports, and the absorption of fluorescent photons transmitted through the thermal link. Laboratory experimentation coupled with computer modeling using Code V optical software have resulted in link designs capable of reducing the transmission to 0.04% of the fluoresced photons emitted toward the thermal link. The ideal thermal link will have minimal surface area, provide complete optical isolation for the load, and possess high thermal conductivity. Modeling results imply that a 1 cm/sup 3/ load can be chilled to 102 K with currently available cooling efficiencies using a 100 W pump laser on a YB:ZBLANP system, and using an ideal link that has minimal surface area and no optical transmission. We review the simulated steady-state cooling temperatures reached by the heat load for several link designs and system configurations as a comparative measure of how well particular configurations perform

Thermal Links for the Implementation of an Optical Refrigerator

Optical refrigeration has been demonstrated by several groups of researchers, but the cooling elements have not been thermally linked to realistic heat loads in ways that achieve the desired temperatures. The ideal thermal link will have minimal surface area, provide complete optical isolation for the load, and possess high thermal conductivity. We have designed thermal links that minimize the absorption of fluoresced photons by the heat load using multiple mirrors and geometric shapes including a hemisphere, a kinked waveguide, and a tapered waveguide. While total link performance is dependent on additional factors, we have observed net transmission of photons with the tapered link as low as 0.04%. Our optical tests have been performed with a surrogate source that operates at 625 nm and mimics the angular distribution of light emitted from the cooling element of the Los Alamos solid state optical refrigerator. We have confirmed the optical performance of our various link geometries with computer simulations using CODE V optical modeling software. In addition we have used the thermal modeling tool in COMSOL MULTIPHYSICS to investigate other heating factors that affect the thermal performance of the optical refrigerator. Assuming an ideal cooling element and a nonabsorptive dielectric trapping mirror, the three dominant heating factors are (1) absorption of fluoresced photons transmitted through the thermal link, (2) blackbody radiation from the surrounding environment, and (3) conductive heat transfer through mechanical supports. Modeling results show that a 1 cm3 load can be chilled to 107 K with a 100Wpump laser. We have used the simulated steady-state cooling temperatures of the heat load to compare link designs and system configurations

Preface to the Topical Volume Earthquake Source Physics on Various Scales

A robust understanding of the physical processes that occur during earthquake rupture is of key importance for improving our ability to reliably predict earthquake ground motions from future damaging events. The past few decades have seen intensive research in this field and scientists became aware of the remarkable complexity of earthquake rupture, which has been shown to be highly variable at all scales and to span a wide dynamic range, from slow to super-shear earthquakes