Crop Insurance Purchase Decisions: A Study of Northern Illinois Farmers

When selecting crop insurance coverage, farmers must consider multiple factors. The importance associated with factors that are considered when making crop insurance decisions varies among individual farmers. As available crop insurance options increase, selecting the appropriate coverage becomes a more complicated process. The prevalence of crop insurance participation and the existence of multiple selection criteria also makes understanding participant decisions more difficult. This paper provides findings of a mail survey conducted among farmers in northern Illinois. Mainly, this paper examines factors influencing farmers’ crop insurance purchase decisions, types of coverage purchased, and farmers’ risk attitudes.Crop Production/Industries,

30-nm wavelength conversion at 10 Gbit/s by four-wave mixing in a semiconductor optical amplifier

Four-wave mixing (FWM) in semiconductor optical amplifiers (SOAs) is currently the only available strictly transparent wavelength-conversion technique, which is not penalized by phase matching. The span of the conversion is limited primarily by conversion efficiency and signal-to-noise (SNR) issues, both of which are expected to improve with the use of longer SOAs. In this paper, we demonstrate significantly enhanced performance of long converters in a system experiment at 10 Gbit/s. The experiment shows for the first time, to our knowledge, that FWM wavelength down-conversions can span the full gain bandwidth of erbium-doped fiber amplifiers

Enhancement of pigmeat quality by altering pre-slaughter management

End of project reportThe studies presented in this report were conducted to investigate the effect of breed, slaughter weight, castration of male pigs and strategic feeding strategies on the performance of pigs to slaughter and on their carcass quality. The effect of breed, gender and feeding regimen on the performance of pigs and their carcass quality was examined in the first study (Section 3). From weaning to slaughter Landrace-sired pigs grew at a similar rate but had a better feed conversion efficiency compared with Duroc-sired pigs. Landrace-sired pigs also had a higher carcass lean and greater muscle depth than Duroc-sired pigs. Entire male pigs grew more efficiently, had lower lean content in their carcasses and had a reduced kill out yield when compared with gilts. The eye muscle depth was greater for gilts than entire males. Diluting the diet with grass-meal (GM) reduced growth rate, caused a deterioration in feed conversion efficiency, reduced back fat thickness, reduced eye muscle thickness and reduced kill out yield compared to the control feeding regimen of a cereal based diet. Compensatory growth was observed during a re-alimentation period following a period of diet dilution with grass-meal. However, where it did occur, in most cases it was only partial. Adding 5% rapeseed oil instead of lard to the finisher diet increased nitrogen utilization efficiency and phosphorous utilization efficiency. The effect of gender (boar, castrate, gilt) and slaughter weight (80 to 120kg) on pig performance, carcass quality, meat quality, and nitrogen excretion was investigated in the second study (Section 4). Boars grew faster than gilts and more efficiently than castrates or gilts. Castrates had a higher kill out yield than boars. Nitrogen excretion from castrates was similar to gilts which were both higher than that from boars. The processing value of carcasses from castrates may be higher than that of boars and gilts. In particular castrates had heavier loins and bellies than either boars or gilts. Carcasses from castrates and gilts had a higher temperature (recorded 24 hours post slaughter) than boars. However, pH24 was not affected by gender. The intramuscular fat content of the l. dorsi in castrates was higher than that of boars or gilts, however at 1.65% this was well below the level (2.0%) above which any noticeable sensory attributes might be detected. Feed intake increased with increasing slaughter weight and feed conversion efficiency deteriorated. N excretion also increased with each increment in weight. Carcass lean content increased up to 90kg live EOP 4939.doc 4 25/10/2005 weight then reached a plateau and declined after 110kg live weight. Heavier carcasses yielded more product for approximately the same slaughtering cost and the associated larger muscles could make it easier to use seam butchery techniques that result in lean, well-trimmed, attractive cuts and joints. The pH45 and pH24 were reduced with increasing slaughter weight and drip loss increased. Heavier pigs may be more prone to the development of PSE than lighter pigs as their carcass temperature remains higher for longer than that of lighter pigs

Static Envelope Patterns in Composite Resonances Generated by Level Crossing in Optical Toroidal Microcavities

We study level crossing in the optical whispering-gallery (WG) modes by using toroidal microcavities. Experimentally, we image the stationary envelope patterns of the composite optical modes that arise when WG modes of different wavelengths coincide in frequency. Numerically, we calculate crossings of levels that correspond with the observed degenerate modes, where our method takes into account the not perfectly transverse nature of their field polarizations. In addition, we analyze anticrossing with a large avoidance gap between modes of the same azimuthal number

Analysis of the 2007/8 Defra Farm Business Survey Energy Module

Key points This study has delivered an invaluable baseline estimate of energy use and greenhouse gas (GHG) emissions on commercial farms in England. Energy use and GHG emissions associated with particular commodities were quantified and results broadly agreed with those derived by Life Cycle Assessment, but with much scatter in the environmental performance of farms.Direct energy use on farms was generally less that indirect (embedded) energy use, except for horticulture, which is dominated by heating fuel use. In contrast, most GHG emissions are incurred on farms, rather than as embedded emissions.Scatter in both environmental and economic performance underlies the somewhat disappointing finding of no clear positive link between farm financial performance and energy use or GHG emissions. However, the mere existence of these ranges shows that there is scope for improvement in both financial and environmental performance and that there is no apparent barrier for both to be achievable in harmony. The recording of such farm-level energy data is essential for the future, as it should enable improvements to be made in efficiency of energy use. The improved UK agricultural GHG inventory will depend on high quality energy data on agricultural activities. This study will be invaluable in identifying the level of detail needed. Future data requirements include: contractor work rates and fuel use per unit area and per unit time, fertiliser and pesticide use by brand name, enhanced output data, especially animal live weights, and horticultural produce recorded by weight rather than by value

Ten year change in forest succession and composition measured by remote sensing

Vegetation dynamics and changes in ecological patterns were measured by remote sensing over a 10 year period (1973 to 1983) for 148,406 landscape elements, covering more than 500 sq km in a protected forested wilderness. Quantitative measurements were made possible by methods to detect ecologically meaningful landscape units; these allowed measurement of ecological transition frequencies and calculation of expected recurrence times. Measured ecological transition frequencies reveal boreal forest wilderness as spatially heterogeneous and highly dynamic, with one-sixth of the area in clearings and early successional stages, consistent with recent postulates about the spatial and temporal patterns of natural ecosystems. Differences between managed forest areas and a protected wilderness allow assessment of different management regimes

Cluster randomised trials in the medical literature: two bibliometric surveys

Background: Several reviews of published cluster randomised trials have reported that about half did not take clustering into account in the analysis, which was thus incorrect and potentially misleading. In this paper I ask whether cluster randomised trials are increasing in both number and quality of reporting. Methods: Computer search for papers on cluster randomised trials since 1980, hand search of trial reports published in selected volumes of the British Medical Journal over 20 years. Results: There has been a large increase in the numbers of methodological papers and of trial reports using the term 'cluster random' in recent years, with about equal numbers of each type of paper. The British Medical Journal contained more such reports than any other journal. In this journal there was a corresponding increase over time in the number of trials where subjects were randomised in clusters. In 2003 all reports showed awareness of the need to allow for clustering in the analysis. In 1993 and before clustering was ignored in most such trials. Conclusion: Cluster trials are becoming more frequent and reporting is of higher quality. Perhaps statistician pressure works

Biofabrication: an overview of the approaches used for printing of living cells

The development of cell printing is vital for establishing biofabrication approaches as clinically relevant tools. Achieving this requires bio-inks which must not only be easily printable, but also allow controllable and reproducible printing of cells. This review outlines the general principles and current progress and compares the advantages and challenges for the most widely used biofabrication techniques for printing cells: extrusion, laser, microvalve, inkjet and tissue fragment printing. It is expected that significant advances in cell printing will result from synergistic combinations of these techniques and lead to optimised resolution, throughput and the overall complexity of printed constructs

Correlating Volatile Lipid Oxidation Compounds with Consumer Sensory Data in Dairy Based Powders during Storage

peer-reviewedLipid oxidation (LO) is a recognised problem in dairy powders due to the formation of volatile odour compounds that can negatively impact sensory perception. Three commercial dairy powders, fat-filled whole milk powder (FFWMP), skim milk powder (SMP), and infant milk formula (IMF), stored under different conditions (21 °C, 37 °C, or 25 °C with 50% humidity), were evaluated by consumer acceptance studies, ranked descriptive sensory analysis, and LO volatile profiling using headspace solid phase microextraction gas chromatography mass spectrometry (HS-SPME GCMS) over 16 weeks. Significant (p = 0.001) differences in the concentration of LO compounds and sensory perception were evident between sample types in the different storage conditions. The sensory acceptance scores for FFWMP and SMP remained stable throughout storage in all conditions, despite the increased perception of some LO products. The IMF sample was perceived negatively in each storage condition and at each time point. Overall increases in hexanal, heptanal, and pentanal correlated with “painty”, “oxidised”, “cooked”, and “caramelised” attributes in all samples. The concentration of some LO volatiles in the IMF was far in excess of those in FFWMP and SMP. High levels of LO volatiles in IMF were presumably due to the addition of polyunsaturated fatty acids (PUFA) in the formulation

Tissue engineering with gellan gum

Engineering complex tissues for research and clinical applications relies on high-performance biomaterials that are amenable to biofabrication, maintain mechanical integrity, support specific cell behaviours, and, ultimately, biodegrade. In most cases, complex tissues will need to be fabricated from not one, but many biomaterials, which collectively fulfill these demanding requirements. Gellan gum is an anionic polysaccharide with potential to fill several key roles in engineered tissues, particularly after modification and blending. This review focuses on the present state of research into gellan gum, from its origins, purification and modification, through processing and biofabrication options, to its performance as a cell scaffold for both soft tissue and load bearing applications. Overall, we find gellan gum to be a highly versatile backbone material for tissue engineering research, upon which a broad array of form and functionality can be built