Should energy efficiency be traded off for other product attributes? : an analysis of air-conditioner regulation in Japan

This paper examines the functioning of energy efficiency standards and labeling policies for air conditioners in Japan. The results of our empirical analysis suggest that consumers respond more to label information, which benchmarks the energy efficiency performance of each product to a pre-specified target, than to direct performance measures. This finding provides justification for the setting, and regular updating, of target standards as well as their use in calculating relative performance measures. We also find, through graphical analysis, that air conditioner manufacturers face a tradeoff between energy efficiency and product compactness when they develop their products. This tradeoff, combined with the semi-regular upward revision of minimum energy efficiency standards, has led to the growth in indoor unit size of air conditioners in recent years. In the face of this phenomenon, regulatory rules were revised so that manufacturers could adhere to less stringent standards if the indoor unit size of their product remains below a certain size. Our demand estimates provide no evidence that larger indoor unit size causes disutility to consumers. It is therefore possible that the regulatory change was not warranted from a consumer welfare point of view

Uber die Legierungen des Mangans und Siliziums mit Alkali- und Erdalkalimetallen

Bekanntlich uben die Zusatze von Alkali- und Erdalkalimetallen wie Kalzium, Lithium, Barium und Strontium zu Eisenschmelzen vor allem zur Veredelung des Gusseisens durch Kugelgraphitstruktur eine beachtliche Wirkung aus. Auch wegen ihrer starken Affinitat fur Gase in der Schmelze hieraus folgt eine interessante Moglichkeit der Eigenschaftsverbesserung fur Stahle. Dies wirft die Frage auf, wie diese Metalle zur Eisenschmelze wirksam zugesetzt werden kann. Zu diesem Zweck konnte man vorschlagen, sie in Form einer Legierung mit Mangan sowie Silizium zu verwenden. Die Legierungssysteme des Mangans mit Lithium, Barium und Strontium sind aber bislang gar nicht bearbeitet worden, wahrend das System Mangan-Kalzium^ von den Verfassern kurzlich untersucht worden ist. Uber die Legierungen des Siliziums mit Lithium, Barium und Strontium liegen einige Unter-suchungen vor, die sich hauptsachlich mit der praktischen Darstellung der Silizide und der Bestimmung ihrer Zusammensetzung beschaftigen. Die vol-lstandigen Zustandsiblder dieser Systeme sind heute nicht bekannt. Die Tausache, dass man durch die ublichen Schmelzverfahren keine reine Legierungen herstellen kann, verhindert die Untersuchungen uber diese Legierungssysteme. Die Schwierig-keit ist jedoch, wie in der Arbeit uber das System Mangan-Kalzium^ angegeben, durch Lichtbogenschmelzen in einer wassergekuhlten Kupferkokille unter Argon gelost worden

Bayesian Modeling for Estimating Cattle’s Dung position in Pasture

Livestock excrement is one of the major sources of greenhouse gas (GHG) emission in pasture. As a first step in evaluating its contribution to overall GHG emissions, an understanding of excretion distribution patterns in pastures is required. Betteridge et al. (2010) describe a urine sensor that detects and logs each urination event of female sheep and cattle. The urine sensor records time and ambient temperature at one-second intervals however, patters of dung distribution are not specified. The objective of this study was to predict spatial distribution of cattle dung. The knowledge of livestock excrement position may be useful for farmers to minimize overall GHG emissions

The Novel Eryngii Method of Nipple Reduction for Female-to-Male Transsexuals

Nosaka, NobuyukiMastectomy is usually the first and most important surgical procedure in female-to-male (FTM) individuals with gender identity disorder. Nipple reduction is also important in the process of reconstructing the chest wall for a more male appearance. If the nipples remain large after a mastectomy, the results may be disappointing to many FTM transsexuals. Nipple reduction enables these individuals to go to the beach or Japanese public baths, where they may go topless in public. We therefore consider that nipple reduction is indicated for all FTM transsexuals who desire it. There are a variety of methods for the reduction of enlarged nipples for women or non-FTM patients, but only a few reports have described the process used to create masculine-appearing nipples for FTM transsexuals. We developed a novel technique called the Eryngii method for creating male-like nipples using a 4-mm diameter dermal punch knife. The name of the method refers to the Eryngii king trumpet mushroom, which the nipple resembles after the surgical process. The main strength of this method is that it permits the creation of ideal nipples without difficulty. Here we introduce the technique and discuss our history of surgical methods for nipple reduction, including improvements and elaborations

Towards Whole Arm Manipulation by Contact State Transition

This paper discusses the whole arm manipulation allowing the contact state transition. For manipulation of an object under fully constrained, the contact state transition becomes necessary. In order to realize the object manipulation, we first derive the feasible direction of the object manipulation by analyzing the active/passive closure properties for every combination of contact states. Second, we derive the set of joint torque to move the object in the feasible direction. These analyses also provide the joint torque to realize the manipulation at the planned contact states. Effectiveness of the proposed method is confirmed by some simulation results. © 2006 IEEE

Experimental investigation of effect of fingertip stiffness on resistible force in grasping

In this study, we experimentally investigated the effect of robot fingertip stiffness on the maximum resistible force. The maximum resistible force is defined as the maximum tangential force at which the fingertip can maintain contact when applying and increasing tangential/shearing force. We include in the definition of this term the effect of fingertip deformation. In contrast to our previous study [11], cylindrical fingertips with flat surfaces were used in this study so that the contact area would remain the same when there was no tangential/shearing force. This made it possible to see the effect of fingertip stiffness more clearly. We also investigated the effect of curvature of the contact surface, which was not investigated in depth in [11]. The main findings are as follows. 1) Harder fingertips produce larger resistible forces, irrespective of the shape of the contact surface (flat or curved). 2) For harder fingertips, the maximum resistible force depends largely on the shape of the contact surface, while for softer fingertips, the shape has little effect. 3) For softer fingertips, the magnitude of the resistible force changes little even when the normal force increases. © 2015 IEEE

Object Manipulation under Hybrid Active/Passive Closure

In this paper, we discuss the manipulation of an object under hybrid active/passive closure. We show the orthogonality between the directions of active and passive force closures for general grasping systems. Based on the orthogonality, we decompose the dynamics of grasping system into the "active part" and the "passive part". By using the decomposition, we show that the grasped object can be manipulated only by considering the dynamics of the active part. We also consider how to determine the desired internal forces in order to satisfy frictional constraints during the manipulation. In order to verify the validity of our approach, some simulation results are shown

Neuroligin3 splice isoforms shape inhibitory synaptic function in the mouse hippocampus

Synapse formation is a dynamic process essential for the development and maturation of the neuronal circuitry in the brain. At the synaptic cleft, transsynaptic protein-protein interactions are major biological determinants of proper synapse efficacy. The balance of excitatory and inhibitory synaptic transmission (E-I balance) stabilizes synaptic activity, and dysregulation of the E-I balance has been implicated in neurodevelopmental disorders, including autism spectrum disorders. However, the molecular mechanisms underlying the E-I balance remain to be elucidated. Here, using single-cell transcriptomics, immunohistochemistry and electrophysiology approaches to murine CA1 pyramidal neurons obtained from organotypic hippocampal slice cultures, we investigate Neuroligin (Nlgn) genes that encode a family of postsynaptic adhesion molecules known to shape excitatory and inhibitory synaptic function. We demonstrate that the NLGN3 protein differentially regulates inhibitory synaptic transmission in a splice isoform-dependent manner at hippocampal CA1 synapses. We also found that distinct subcellular localizations of the NLGN3 isoforms contribute to the functional differences observed among these isoforms. Finally, results from single-cell RNA-Seq analyses revealed that Nlgn1 and Nlgn3 are the major murine Nlgn genes and that the expression levels of the Nlgn splice isoforms are highly diverse in CA1 pyramidal neurons. Our results delineate isoform-specific effects of Nlgn genes on the E-I balance in the murine hippocampus