Ambiguity in the Determination of the Free Energy for a Model of the Circle Map

We consider a simple model to describe the widths of the mode locked intervals for the critical circle map. Using two different partitions of the rational numbers, based on Farey series and Farey tree levels respectively, we calculate the free energy analytically at selected points for each partition. It is found that the result of the calculation depends on the method of partition. An implication of this is that the generalized dimensions $D_q$ are different for each partition except when $q=0$, i.e. only the Hausdorff dimension is the same in each case.Comment: 14 page

Feed intake pattern, behaviour, rumen characteristics and blood metabolites of finishing beef steers offered total mixed rations constituted at feeding or ensiling

peer-reviewedTwo experiments were undertaken. In Experiment 1, behaviour, intake pattern and blood metabolites, were recorded for steers offered total mixed rations (TMR) based on grass silage and concentrates, and constituted either at ensiling (E-TMR) or feedout (F-TMR). Fourteen continental crossbred steers (mean starting weight 505 (s.d. 41.5) kg) were assigned to each of the following eight treatments: grass silage offered ad libitum (SO), E-TMR diets constituted in approximate dry matter (DM) ratios of grass:concentrates of 75:25 (EL), 50:50 (EM) and 25:75 (EH), F-TMR diets constituted in approximate DM ratios of grass silage:concentrates of 75:25 (FL), 50:50 (FM) and 25:75 (FH), and finally concentrates ad libitum (AL). Total DM intake increased linearly (P < 0.001) and the time spent eating and ruminating decreased linearly (P < 0.001) with increasing concentrate proportion. Animals on the F-TMR diets had higher total DM intakes (P < 0.05) and plasma glucose (P < 0.05) and urea (P < 0.001) concentrations than animals on the corresponding E-TMR diets. No effect of method of feed preparation on intake pattern or behaviour was recorded. In Experiment 2, four ruminally cannulated Holstein-Friesian steers of mean initial live weight 630 (s.d. 23.2) kg were used to evaluate rumen characteristics for four of the above diets (FL, EL, FH and EH) in a 4 × 4 latin square design. Higher concentrate diets resulted in lower rumen pH (P < 0.05), higher lactic acid (P < 0.001) and ammonia (P < 0.05) concentrations and lower acetate:propionate (P < 0.05). F-TMR was associated with a higher (P < 0.05) rumen volatile fatty acid concentration but no difference in other rumen fermentation characteristics compared to E-TMR. Concentrate proportion and method of feed preparation had no effect (P > 0.05) on rumen pool sizes but animals consuming the high concentrate diet had a faster (P < 0.05) rumen passage rate of NDF than animals on the low concentrate diet.B. Cummins was in receipt of a Teagasc Walsh Fellowship

Conservation characteristics of grass and dry sugar beet pulp co-ensiled after different degrees of mixing

peer-reviewedThe objective of this experiment was to quantify the effects of the degree of mixing of dry molassed sugar beet pulp (BP) with grass on silage conservation characteristics. Herbage from a timothy (Phleum pratense) sward was precision chopped and treated with a formic acid based additive (3 l/t grass). Units of 50 kg grass, without or with 2.5kg BP were randomly allocated among four replicates on each of seven treatments. The treatments were (1) no BP (NONE), (2) BP evenly mixed through the grass (EVEN), (3) BP evenly mixed through the lower 25 kg grass (LOWH), (4) BP evenly mixed through the lower 12.5 kg grass (LOWQ), (5) 0.625 kg BP mixed through the top 25 kg grass and 1.875 kg SBP mixed through the lower 25 kg grass (25/75), (6) BP placed in 0.5 kg layers beneath each 10 kg grass (LAYR), and (7) BP placed in a single layer under all of the grass (BOTM). Laboratory silos were filled and sealed, and stored at 15 °C for 163 days. Effluent was collected and weighed from each silo throughout the ensilage period. At opening, silage composition and aerobic stability measurements were made. Total outflow of effluent was reduced (P<0.001) by the addition of BP; LAYR had a greater effect (P<0.001) than any of the other treatments. Effluent dry matter (DM) concentration was highest (P<0.05) for BOTM and lowest (P<0.01) for NONE. All treatments underwent similar lactic-acid dominant fermentations. Incorporation of BP with grass increased silage DM concentration (P<0.001), in vitro DM digestibility (P<0.05) and water soluble carbohydrate (P<0.001) concentration and reduced acid detergent fibre (P<0.001) concentration. Aerobic stability was similar across treatments and aerobic deterioration at 192 h was higher (P<0.05) for LOWQ, 25/75, LAYR and BOTM than for NONE. In conclusion, the incorporation of BP increased silage DM digestibility but had relatively little effect on fermentation or aerobic stability. Placing BP in layers gave the largest and most sustained restriction in effluent output.B. Cummins acknowledges receipt of a Walsh Fellowship provided by Teagasc

Studies relating to Polyunsaturated Fatty Acid (PUFA) Supplementation and Fertility in Cattle

End of project reportReproductive inefficiency has a significant impact on the economic performance of both dairy and beef herds, particularly in seasonal calving systems. Nutrition plays a fundamental role in reproduction. Furthermore, there is emerging evidence that supplemental dietary polyunsaturated fatty acids (PUFA) may increase cow fertility independent of their role as energy substrates. A number of studies have reported enhanced reproductive performance in dairy cows following dietary supplementation with sources of n-3 PUFA. However the possible mechanisms involved have not been identified and there is some inconsistency in the published literature on this topic. The objective of the research reported was to conduct a holistic examination of the effects of dietary long-chain n-3 PUFA supplementation on metabolic and reproductive responses in cattle. Such information is essential for the appropriate formulation of diets to enhance cow reproductive performance and in particular embryo survival

Effects of breed type, silage harvest date and pattern of offering concentrates on intake, performance and carcass traits of finishing steers

peer-reviewedThe objective of this experiment was to investigate the effects and interactions of breed type, silage harvest date and pattern of offering concentrates on intake, performance and carcass traits of finishing steers. Seventy-two steers (36 Friesian and 36 beef cross) were blocked on weight within breed type and assigned to a pre-experimental slaughter group or to one of 4 dietary treatments in a 2 (breed type) 2 (early- or late- cut silage) 2 (flat rate or varied pattern of offering concentrates) factorial arrangement of treatments. The flat-rate feeding pattern was silage ad libitum plus 5 kg concentrates per head daily to slaughter. The varied feeding pattern was silage only for 79 days followed by concentrates ad libitum to slaughter. All animals were slaughtered together after 164 days when the groups on the two feeding patterns had consumed the same total quantity of concentrates. Friesians had a higher (P < 0.001) silage dry matter (DM) intake and a higher (P < 0.01) total DM intake than the beef crosses. Live-weight gain was similar for both breed types but the beef-cross animals had a higher (P < 0.001) kill-out proportion, higher (P < 0.01) carcass gain, and better (P < 0.001) carcass conformation than the Friesians. The beef-cross type also had a higher (P < 0.001) proportion of muscle and a lower (P < 0.001) proportion of bone in the carcass. Silage harvest date had no effect on silage or total DM intakes but the early-cut silage did result in higher (P < 0.01) carcass gain. Animals on the varied feeding pattern consumed less (P < 0.01) silage DM and less (P < 0.001) total DM than those on the flat rate feeding pattern. Live-weight gain and carcass gain were similar for the two feeding patterns. It is concluded that Friesians had a higher intake, but had lower carcass gain than the beef-cross type. Animals on the early-cut silage had higher carcass gain than those on the late-cut silage. The varied feeding pattern resulted in lower DM intake but efficiency of feed energy utilisation was similar for both feeding patterns. Interactions were generally not statistically significant

Targeting of anionic membrane species by lanthanide(III) complexes: towards improved MRI contrast agents for apoptosis

No abstract available

Active damping application to the shuttle RMS

Control Structure Interaction (CSI) is a relatively new technology developed over the last 10 to 15 years for application to large flexible space vehicles. The central issue is recognition that high performance control systems necessary for good spacecraft performance may adversely interact with the dynamics of the spacecraft structures, a problem increasingly aggravated by the large size and reduced stiffness of modern spacecraft structural designs. The CSI analysis and design methods were developed to avoid interactions while maintaining spacecraft performance without exceeding structural capabilities, but they remain largely unvalidated by hardware experiments or demonstrations, particularly in-space flight demonstrations. One recent proposal for a low cost flight validation of CSI technology is to demonstrate active damping augmentation of the Space Shuttle Remote Manipulator System (RMS). An analytical effort to define the potential for such an active damping augmentation demonstration to improve the structural dynamic response of the RMS following payload maneuvers is described. It is hoped that this study will lead to an actual inflight CSI test with the RMS using existing shuttle hardware to the maximum extent possible. By using the existing hardware, the flight demonstration results may eventually be of direct benefit to actual Space Shuttle RMS operations, especially during the construction of the Space Station Freedom

A synopsis of test results and knowledge gained from the Phase-0 CSI evolutionary model

The Phase-0 CSI Evolutionary Model (CEM) is a testbed for the study of space platform global line-of-sight (LOS) pointing. Now that the tests have been completed, a summary of hardware and closed-loop test experiences is necessary to insure a timely dissemination of the knowledge gained. The testbed is described and modeling experiences are presented followed by a summary of the research performed by various investigators. Some early lessons on implementing the closed-loop controllers are described with particular emphasis on real-time computing requirements. A summary of closed-loop studies and a synopsis of test results are presented. Plans for evolving the CEM from phase 0 to phases 1 and 2 are also described. Subsequently, a summary of knowledge gained from the design and testing of the Phase-0 CEM is made