992 research outputs found
Heart rate control during treadmill exercise using input-sensitivity shaping for disturbance rejection of very-low-frequency heart rate variability
AbstractBackgroundAutomatic and accurate control of heart rate (HR) during treadmill exercise is important for prescription and implementation of training protocols. The principal design issue for feedback control of HR is to achieve disturbance rejection of very-low-frequency heart rate variability (VLF-HRV) with a level of control signal activity (treadmill speed) which is sufficiently smooth and acceptable to the runner. This work aimed to develop a new method for feedback control of heart rate during treadmill exercise based on shaping of the input sensitivity function, and to empirically evaluate quantitative performance outcomes in an experimental study.MethodsThirty healthy male subjects participated. 20 subjects were included in a preceding study to determine an approximate, average nominal model of heart rate dynamics, and 10 were not. The design method guarantees that the input sensitivity function gain monotonically decreases with frequency, is therefore devoid of peaking, and has a pre-specified value at a chosen critical frequency, thus avoiding unwanted amplification of HRV disturbances in the very-low-frequency band. Controllers were designed using the existing approximate nominal plant model which was not specific to any of the subjects tested.ResultsAccurate, stable and robust overall performance was observed for all 30 subjects, with a mean RMS tracking error of 2.96beats/min and a smooth, low-power control signal. There were no significant differences in tracking accuracy or control signal power between the 10 subjects who were not in the preceding identification study and a matched subgroup of subjects who were (respectively: mean RMSE 2.69 vs. 3.28beats/min, p=0.24; mean control signal power 15.62 vs. 16.31×10−4m2/s2, p=0.37). Substantial and significant reductions over time in RMS tracking error and average control signal power were observed.ConclusionsThe input-sensitivity-shaping method provides a direct way to address the principal design challenge for HR control, namely disturbance rejection in relation to VLF-HRV, and delivered robust and accurate tracking with a smooth, low-power control signal. Issues of parametric and structural plant uncertainty are secondary because a simple approximate plant model, not specific to any of the subjects tested, was sufficient to achieve accurate, stable and robust heart rate control performance
Feedback control of heart rate during outdoor running: a smartphone implementation
AbstractThe aim was to develop and to investigate the technical feasibility of a novel smartphone-based mobile system for feedback control of heart rate during outdoor running. Accurate control is important because heart rate can be used for prescription of exercise intensity for development and maintenance of cardiorespiratory fitness.An Android smartphone was employed together with wearable, wireless sensors for heart rate and running speed. A simple feedback design algorithm appropriate for embedded mobile applications was developed. Controller synthesis uses a low-order, physiologically-validated plant model and requires a single bandwidth-related tuning parameter.Twenty real time controller tests demonstrated highly accurate tracking of target heart rate with a mean root-mean-square tracking error (RMSE) of less than 2 beats per minute (bpm); a sufficient level of robustness was demonstrated within the range of conditions tested. Adjustment of the tuning parameter towards lower closed-loop bandwidth gave markedly lower control signal power (0.0008 vs. 0.0030m2/s2, p<0.0001, low vs. high bandwidth), but at the cost of a significantly lower heart rate tracking accuracy (RMSE 1.99 vs. 1.67bpm, p<0.01).The precision achieved suggests that the system might be applicable for accurate achievement of prescribed exercise intensity for development and maintenance of cardiorespiratory fitness. High-accuracy feedback control of heart rate during outdoor running using smartphone technology is deemed feasible
Creep and Creep-Recovery Models for Wood Under High Stress Levels
Forty small clear southern pine specimens were loaded under third-point bending to examine creep and creep-recovery behavior for wood under high stress levels. Stress levels of between 69% and 91% of the predicted static strength were applied for 23 h with 1 h allowed for recovery, and the resulting deflection vs. time behavior was studied. The experimental creep and creep-recovery behavior was modeled using modified power law functions. The results indicate that these functions provide the best fit to both primary and secondary experimental data. The empirical models can be used to simulate the viscoelastic behavior of wood under high stress levels. The simulation will provide a useful tool in future studies to examine duration-of-load (DOL) effect, which is one of the more important factors in wood structural design
Usability evaluation of an interactive leg press training robot for children with neuromuscular impairments.
BACKGROUND
The use of robotic technology for neurorehabilitative applications has become increasingly important for adults and children with different motor impairments.
OBJECTIVE
The aim of this study was to evaluate the technical feasibility and usability of a new interactive leg-press training robot that was developed to train leg muscle strength and control, suitable for children with neuromuscular impairments.
METHODS
An interactive robotic training system was designed and constructed with various control strategies, actuators and force/position sensors to enable the performance of different training modes (passive, active resistance, and exergames). Five paediatric patients, aged between 7 and 16 years (one girl, age 13.0 ± 3.7 years, [mean ± SD]), with different neuromuscular impairments were recruited to participate in this study. Patients evaluated the device based on a user satisfaction questionnaire and Visual Analog Scale (VAS) scores, and therapists evaluated the device with the modified System Usability Scale (SUS).
RESULTS
One patient could not perform the training session because of his small knee range of motion. Visual Analog Scale scores were given by the 4 patients who performed the training sessions. All the patients adjudged the training with the interactive device as satisfactory. The average SUS score given by the therapists was 61.2 ± 18.4.
CONCLUSION
This study proposed an interactive lower limb training device for children with different neuromuscular impairments. The device is deemed feasible for paediatric rehabilitation applications, both in terms of technical feasibility and usability acceptance. Both patients and therapists provided positive feedback regarding the training with the device
Generalised dimensions of measures on almost self-affine sets
We establish a generic formula for the generalised q-dimensions of measures
supported by almost self-affine sets, for all q>1. These q-dimensions may
exhibit phase transitions as q varies. We first consider general measures and
then specialise to Bernoulli and Gibbs measures. Our method involves estimating
expectations of moment expressions in terms of `multienergy' integrals which we
then bound using induction on families of trees
Short Paper: Antennas for Mussel-Based Underwater
ABSTRACT Researchers are working on using freshwater mussels as biological sensors. A sensor placed on the mussel detects the mussel's rhythmic opening and closing, or gape. Changes in the gape can indicate changes in the mussel's environment. We plan to attach gape sensors, microcontrollers, and radios to mussels and place them back in their natural environment. Small, inexpensive radios operating in the Industrial, Scientific and Medical (ISM) bands will provide the physical link of an underwater wireless sensor network (WSN). Despite the attenuation radio waves experience in water, the low cost of these radios should allow us to deploy enough to set up a reliable communications network. While commercially available radios can be used underwater with waterproofing, antennas designed for use in air are unsuitable for use in water, because of the different electromagnetic properties of water and air. We designed dipole, loop, and folded dipole antennas for use in water and attached these to transmitters. We measured the power transmitted by the antennas by immersing the transmitters in a tank of water and measuring the received power at different distances using a small dipole antenna attached to a spectrum analyzer. The distance between the antennas was precisely controlled with a motorized xy positioner. Categories and Subject Descriptors General Terms Measurement, Design, Experimentation Keywords Antenna, electromagnetic, underwater, radio, communications, wireless sensor networ
Predicting Strength of Matched Sets of Test Specimens
Five different methods for a priori estimating bending strength of wood and wood composite specimens are compared in this paper. They are: (1) edge-matching, (2) matching specimens by normal distribution, (3) matching specimens by log-normal distribution, (4) simple linear regression, and (5) multiple linear regression. It was found that the square root of mean square error (RMSE) of percent difference (PD) of predicted modulus of rupture (MOR) is the key measure in comparing the five methods. Multiple linear regression was found to be the best method to predict MOR of a specimen in an edge-matched set. Finally, how to create the prediction limits for mean MOR of a subgroup of specimens is discussed. The prediction limits for predicting MOR make it possible to quantitatively determine the effect of various treatments of wood materials
Recruitment in Degraded Marine Habitats: A Spatially Explicit, Individual-Based Model for Spiny Lobster
Coastal habitats that serve as nursery grounds for numerous marine species are badly degraded, yet the traditional means of modeling populations of exploited marine species handle spatiotemporal changes in habitat characteristics and life history dynamics poorly, if at all. To explore how nursery habitat degradation impacts recruitment of a mobile, benthic species, we developed a spatially explicit, individual-based model that describes the recruitment of Caribbean spiny lobster (Panulirus argus) in the Florida Keys, where a cascade of environmental disturbances has reconfigured nursery habitat structure. In recent years, the region has experienced a series of linked perturbations, among them, seagrass die-offs, cyanobacteria blooms, and the mass mortality of sponges. Sponges are important shelters for juvenile spiny lobster, an abundant benthic predator that also sustains Florida\u27s most valuable fishery. In the model, we simulated monthly settlement of individual lobster postlarvae and the daily growth, mortality, shelter selection, and movement of individual juvenile lobsters on a spatially explicit grid of habitat cells configured to represent the Florida Keys coastal nursery. Based on field habitat surveys, cells were designated as either seagrass or hard-bottom, and hard-bottom cells were further characterized in terms of their shelter- and size-specific lobster carrying capacities. The effect of algal blooms on sponge mortality, hence lobster habitat structure, was modeled based on the duration of exposure of each habitat cell to the blooms. Ten-year simulations of lobster recruitment with and without algal blooms suggest that the lobster population should be surprisingly resilient to massive disturbances of this type. Data not used in model development showed that predictions of large changes in lobster shelter utilization, yet small effects on recruitment in response to blooms, were realistic. The potentially severe impacts of habitat loss on recruitment were averted by compensatory changes in habitat utilization and mobility by larger individuals, coupled with periods of fortuitously high larval settlement. Our model provides an underutilized approach for assessing habitat effects on open populations with complex life histories, and our results illustrate the potential pitfalls of relying on intuition to infer the effects of habitat perturbations on upper trophic levels
Comparison of peak cardiopulmonary performance parameters on a robotics-assisted tilt table, a cycle and a treadmill
Robotics-assisted tilt table (RATT) technology provides body support, cyclical stepping movement and physiological loading. This technology can potentially be used to facilitate the estimation of peak cardiopulmonary performance parameters in patients who have neurological or other problems that may preclude testing on a treadmill or cycle ergometer. The aim of the study was to compare the magnitude of peak cardiopulmonary performance parameters including peak oxygen uptake (VO2peak) and peak heart rate (HRpeak) obtained from a robotics-assisted tilt table (RATT), a cycle ergometer and a treadmill. The strength of correlations between the three devices, test-retest reliability and repeatability were also assessed. Eighteen healthy subjects performed six maximal exercise tests, with two tests on each of the three exercise modalities. Data from the second tests were used for the comparative and correlation analyses. For nine subjects, test-retest reliability and repeatability of VO2peak and HRpeak were assessed. Absolute VO2peak from the RATT, the cycle ergometer and the treadmill was (mean (SD)) 2.2 (0.56), 2.8 (0.80) and 3.2 (0.87) L/min, respectively (p < 0.001). HRpeak from the RATT, the cycle ergometer and the treadmill was 168 (9.5), 179 (7.9) and 184 (6.9) beats/min, respectively (p < 0.001). VO2peak and HRpeak from the RATT vs the cycle ergometer and the RATT vs the treadmill showed strong correlations. Test-retest reliability and repeatability were high for VO2peak and HRpeak for all devices. The results demonstrate that the RATT is a valid and reliable device for exercise testing. There is potential for the RATT to be used in severely impaired subjects who cannot use the standard modalities
- …