5 research outputs found
Plazmafizikai kutatások ECR ionforrással = Plasma physics research by ECR ion source
Az ATOMKI eredetileg nagytöltĂ©sű nehĂ©zionok előállĂtására kĂ©szĂĽlt elektron-ciklotronrezonanciás (ECR) ionforrásában fullerĂ©n (C60) plazmákat állĂtottunk elĹ‘. Magát az ionforrást is jelentĹ‘sen átalakĂtottuk, Ăgy a világon eddig publikált legmagasabb intenzitásĂş fullerĂ©nion nyalábokat kaptuk: (C60+)-bĂłl 500 nA, (C60++)-bĂłl 1500 nA. C60+Fe Ă©s C60+N keverĂ©kplazmákat tanulmányoztunk, a kivont ionnyalábban a normál fullerĂ©nnĂ©l nagyobb tömegű rĂ©szecskĂ©ket detektáltunk. Nyalábspektrum-analĂzisek, ESR Ă©s TEM vizsgálatok kimutatták, hogy e rĂ©szecskĂ©k között olyan molekulák is vannak, melyben N, ill. Fe kapcsolĂłdik kĂĽlönbözĹ‘kĂ©ppen C58, C59 Ă©s C60 szĂ©ngömbökhöz. Az ECR-plazma tehát alkalmas fullerĂ©nek Ă©s más anyagok szintĂ©zisĂ©re. Ar, Xe Ă©s Fe plazmákrĂłl röntgenfelvĂ©tel sorozatokat kĂ©szĂtettĂĽnk, a plazma ionjainak tĂ©r- Ă©s energiaeloszlását vizsgáltuk. Hagyományos Ă©s emissziĂłs Langmuir-szondákkal a plazma helytĹ‘l fĂĽggĹ‘ paramĂ©tereit (sűrűsĂ©g, potenciál) vizsgáltuk. KifejlesztettĂĽnk egy programcsomagot (TrapCAD), mellyel igen nagyszámĂş (pl. 10^5) elektron mozgása Ă©s energiaváltozása tanulmányozhatĂł Ă©s követhetĹ‘ grafikusan is az ECR Ă©s hasonlĂł ionforrásokban. Az ECR ionforrást jelentĹ‘sen átalakĂtottuk, mostantĂłl kĂ©t kĂĽlönbözĹ‘ ĂĽzemmĂłdban használhatĂł. AlapkiĂ©pĂtĂ©sben a berendezĂ©s továbbra is kismĂ©retű, magas ionizáltsági fokĂş nehĂ©zionplazmákat állĂt elĹ‘, melybĹ‘l nagytöltĂ©sű ionnyalábok vonhatĂłk ki. Az Ăşj elrendezĂ©sben nagymĂ©retű, de kevĂ©sbĂ© lefosztott plazmákat kapunk. Ekkor a berendezĂ©s elsĹ‘sorban anyagkutatásra, plazma-felĂĽlet kölcsönhatások tanulmányozására alkalmas. A világon ez az elsĹ‘ ilyen kĂ©tfunkciĂłs ECR-berendezĂ©s. | C60 plasmas were produced in the ATOMKI electron cyclotron resonance (ECR) ion source which was originally constructed for the production of highly charged heavy ions. After significant modifications the ever published highest intensities of fullerene ion beams were recorded: 500 nA of (C60)+ and 1500 nA of (C60)++. C60+Fe and C60+N mixture plasmas were studied, in the extracted beam spectra heavier particles than the normal fullerenes, were detected. Beam spectra analysis, ESR and TEM investigations showed that among these particles there were molecules in which N, or Fe were connected by different ways to C58, C59 and C60 carbon balls. This proved that the ECR plasma is suitable to synthesize fullerenes with other materials. X-ray photos were made of Ar, Xe and Fe plasmas and the spatial and energy distribution of the plasma ions were studied. Some local plasma parameters (density, potential) were investigated by traditional and emission-type Langmuir-probes. We developed a code (TrapCAD) to simulate and follow graphically the movement and energy evolution of large number (e.g. 10^5) of electrons in ECR and similar ion sources. The ECR ion source was significantly transformed and from now it can be used in two different working modes. In basic configuration the facility delivers the usual small size, highly charged heavy ion plasmas from which highly charged ion beams can be extracted. In the new arrangement large size, but less ionized plasmas are obtained. This mode is convenient for material research and for plasma-surface investigations. This is the first ECR facility in the world with such two functions
Módszer a fémek emisszivitásának becslésére
A fĂ©mek emisszivitásának ismerete egyre fontosabb anyagtudományi Ă©s folyamatmodellezĂ©si szempontbĂłl. Az eddigi vizsgálatok megmutatták, hogy a legtöbb anyag emisszivitása hĹ‘mĂ©rsĂ©kletfĂĽggĹ‘, Ă©s a legĂ©rdekesebb a 300-1000 K hĹ‘mĂ©rsĂ©klettartomány, ahol a változás a legintenzĂvebb Ă©s a folyamatszabályozás szempontjábĂłl a leglĂ©nyegesebb. HĹ‘mĂ©rsĂ©kletfĂĽggĹ‘ emisszivitást Ă©szleltĂĽnk az alacsonyan ötvözött acĂ©lok plazmanitridálása során, Ă©s egy most futĂł tĂ©ma kapcsán az alacsonyan ötvözött alumĂnium (AlMg1, AlMg3) emisszivitását kell vizsgálnunk. A dolgozatban bemutatjuk az általunk kifejlesztett mĂłdszert, rĂ©szletesen tárgyaljuk az alumĂniumötvözetre kapott mĂ©rĂ©si Ă©s számĂtási eredmĂ©nyeket, Ă©s összehasonlĂtjuk a szakirodalomban találhatĂł eredmĂ©nyekkel
Method for Emissivity Estimation of Metals
Knowledge of the surface emissivity of metals is becoming more and more important both from the material science, process modelling and control point of view. Previous research results have shown that the emissivity of most metals depends on the temperature of the surface. It has also been reported that the most important temperature region is between 300 – 1000 K degrees, where the change of the emissivity is the most intense, which is also the most significant from a process control point of view. We also report temperature dependent emissivity observed during plasma nitriding of low alloy steels. Related to one of our present research topics the study of the low alloy aluminum (AlMg1, AlMg3) emissivity has prooven relevant. In this article the developed emissivity estimation model is presented. In the first part a literature overview and the theoretical approach of the new method is discussed, followed by the experimental results for low alloy aluminium emissivity determination and a comparison with the results available in the literature
Acut alsĂł lĂ©gĂşti obstruktĂv kĂłrkĂ©pek prehospitális ellátása gyermekkorban
Szakdolgozatom megĂrásának cĂ©lja az volt; hogy teljes kĂ©pek kapjak a 0 - tĂłl 18 Ă©letĂ©vig terjedĹ‘ korcsoportok leggyakrabban elĹ‘fordulĂł lĂ©gĂşti megbetegedĂ©seirĹ‘l; fĹ‘leg az alsĂł lĂ©gutakat Ă©rintĹ‘ obstruktĂv kĂłrkĂ©pekrĹ‘l. Kutatási eredmĂ©nyeimet felhasználva egy teljes-; átfogĂł tanulmányt állĂtottam össze.BSc/BAápolás Ă©s betegellátás – mentĹ‘tisztmagyarnappaliV