27,648 research outputs found
Economic method for measuring ultra-low flow rates of fluids
Capillary tube flowmeter measures ultra-low flows of very corrosive fluids /such as chlorine trifluoride and liquid fluorine/ and other liquids with reasonable accuracy. Flowmeter utilizes differential pressure transducer and operates on the principle that for laminar flow in the tube, pressure drop is proportional to flow rate
Space shuttle exhaust cloud properties
A data base describing the properties of the exhaust cloud produced by the launch of the Space Transportation System and the acidic fallout observed after each of the first four launches was assembled from a series of ground and aircraft based measurements made during the launches of STS 2, 3, and 4. Additional data were obtained from ground-based measurements during firings of the 6.4 percent model of the Solid Rocket Booster at the Marshall Center. Analysis indicates that the acidic fallout is produced by atomization of the deluge water spray by the rocket exhaust on the pad followed by rapid scavening of hydrogen chloride gas aluminum oxide particles from the Solid Rocket Boosters. The atomized spray is carried aloft by updrafts created by the hot exhaust and deposited down wind. Aircraft measurements in the STS-3 ground cloud showed an insignificant number of ice nuclei. Although no measurements were made in the column cloud, the possibility of inadvertent weather modification caused by the interaction of ice nuclei with natural clouds appears remote
Breakdown of self-similarity at the crests of large amplitude standing water waves
We study the limiting behavior of large-amplitude standing waves on deep
water using high-resolution numerical simulations in double and quadruple
precision. While periodic traveling waves approach Stokes's sharply crested
extreme wave in an asymptotically self-similar manner, we find that standing
waves behave differently. Instead of sharpening to a corner or cusp as
previously conjectured, the crest tip develops a variety of oscillatory
structures. This causes the bifurcation curve that parametrizes these waves to
fragment into disjoint branches corresponding to the different oscillation
patterns that occur. In many cases, a vertical jet of fluid pushes these
structures upward, leading to wave profiles commonly seen in wave tank
experiments. Thus, we observe a rich array of dynamic behavior at small length
scales in a regime previously thought to be self-similar.Comment: 4 pages, 5 figures. Final version accepted for publicatio
A field study of solid rocket exhaust impacts on the near-field environment
Large solid rocket motors release large quantities of hydrogen chloride and aluminum oxide exhaust during launch and testing. Measurements and analysis of the interaction of this material with the deluge water spray and other environmental factors in the near field (within 1 km of the launch or test site) are summarized. Measurements of mixed solid and liquid deposition (typically 2 normal HCl) following space shuttle launches and 6.4 percent scale model tests are described. Hydrogen chloride gas concentrations measured in the hours after the launch of STS 41D and STS 51A are reported. Concentrations of 9 ppm, which are above the 5 ppm exposure limits for workers, were detected an hour after STS 51A. A simplified model which explains the primary features of the gas concentration profiles is included
Advantages of ice crystal growth experiments in a low gravity environment
The effects of convective fluid motions and mechanical supports on ice crystal growth in experiments conducted on earth can be inferred from studies conducted in their absence in a low-gravity environment. Current experimental results indicate the effects may be significant
Arrays of Josephson junctions in an environment with vanishing impedance
The Hamiltonian operator for an unbiased array of Josephson junctions with
gate voltages is constructed when only Cooper pair tunnelling and charging
effects are taken into account. The supercurrent through the system and the
pumped current induced by changing the gate voltages periodically are discussed
with an emphasis on the inaccuracies in the Cooper pair pumping.
Renormalisation of the Hamiltonian operator is used in order to reliably
parametrise the effects due to inhomogeneity in the array and non-ideal gating
sequences. The relatively simple model yields an explicit, testable prediction
based on three experimentally motivated and determinable parameters.Comment: 13 pages, 9 figures, uses RevTeX and epsfig, Revised version, Better
readability and some new result
A domain-specific design architecture for composite material design and aircraft part redesign
Advanced composites have been targeted as a 'leapfrog' technology that would provide a unique global competitive position for U.S. industry. Composites are unique in the requirements for an integrated approach to designing, manufacturing, and marketing of products developed utilizing the new materials of construction. Numerous studies extending across the entire economic spectrum of the United States from aerospace to military to durable goods have identified composites as a 'key' technology. In general there have been two approaches to composite construction: build models of a given composite materials, then determine characteristics of the material via numerical simulation and empirical testing; and experience-directed construction of fabrication plans for building composites with given properties. The first route sets a goal to capture basic understanding of a device (the composite) by use of a rigorous mathematical model; the second attempts to capture the expertise about the process of fabricating a composite (to date) at a surface level typically expressed in a rule based system. From an AI perspective, these two research lines are attacking distinctly different problems, and both tracks have current limitations. The mathematical modeling approach has yielded a wealth of data but a large number of simplifying assumptions are needed to make numerical simulation tractable. Likewise, although surface level expertise about how to build a particular composite may yield important results, recent trends in the KBS area are towards augmenting surface level problem solving with deeper level knowledge. Many of the relative advantages of composites, e.g., the strength:weight ratio, is most prominent when the entire component is designed as a unitary piece. The bottleneck in undertaking such unitary design lies in the difficulty of the re-design task. Designing the fabrication protocols for a complex-shaped, thick section composite are currently very difficult. It is in fact this difficulty that our research will address
Loadcell supports for a dynamic force plate
An apparatus was developed to accurately measure components of force along three mutually perpendicular axes, torque, and the center of pressure imposed by the foot of a subject walking over its surface. The data obtained were used to supplement high-speed motion picture and electromyographic (EMG) data for in-depth studies of normal or abnormal human gait. Significant features of the design (in particular, the mechanisms used to support the loadcell transducers) are described. Results of the development program and typical data obtained with the device are presented and discussed
- …