Gas Emission Control on Longwall Panels at the Vorkuta Coal Mines

The characteristics of geological conditions and mining technology at the coal mines of Coal Stock Company Vorkutaugol are given in the article. Information about longwall panel ventilation schemes and problems caused by high methane emission is also presented. The results of experiments at longwall panels using the methane emission control ventilation complex are described as well as ways of isolating gob methane removal. Other topics include the methane emission control ventilation complex consisted of drainage entry, an isolating wall with windows, mixing chambers and regulating stoppings. As results of experiments have shown, the most effective gas emission control methods were: the application of gas sucking fans for the isolated gob methane removal, and isolating walls at the line exposed to the gob. Encouraging results were obtained by use of two-entry mining system with yielding pillar between entries, homotropal ventilation and isolated methane removal from the gob

IoT based system for real-time monitoring the hydrogen-ion activity in water bodies

The paper presents design and principle of operation of a mobile combined pH meter. Sensor’s network underlying the IoT system for monitoring water bodies hydrogen ions activity in real time was demonstrated. The measuring device was tested on liquids with different pH levels. The obtained measurement results were compared using a stationary pH meter OHAUS Starter 3100

Decrease in coal losses during mining of contiguous seams in the near-bottom part at Vorkuta deposit

The problem of formation of extended zones with high rock pressure (HRP) from safety pillars at the boundaries of extraction pillars formed due to the mine layout of complex geometry is considered at the example of JSC Vorkutaugol mines. A detailed analysis of the remaining reserves of the near-bottom part of the deposit was carried out to estimate losses and the impact of HRP zones from the Chetvertyi protective seam to mining operations on the Troinoi upper seam along with the possibilities for the reduction of sizes of HRP zones at the account of expanding the underworked space. Due to research on the near-bottom part of the Vorkuta deposit, within the framework of the accepted layout, a zone at the Komsomolskaya mine and two zones at the Zapolyarnaya-2 mine were singled out, at which losses at the boundaries of the extraction pillars amount up to 13-22 % of the total resources of the mine field. The high volume of losses in these pillars indicates the relevance of research on the priority extraction impact of protective seams on the efficiency and safety of mining operations in the working area of underworked and HRP zones. Based on the analysis of foreign and Russian experience in the pillar cleaning-up at the boundaries of working areas and the methodical guidelines and instructions, a technological scheme was developed that allows increasing the coal mining recovery factor in the near-bottom part of the Vorkuta deposit from 0.75 to 0.9 without fundamental changing of the ventilation and transport networks and also without purchasing any additional mining equipment. The conducted economic calculations confirmed the effectiveness of implementing the new technological scheme for cleaning-up reserves at the boundaries of extraction districts. The economic effect is from 0.079 to1.381 billion rubles of additional profit from coaxial extraction pillars, depending on the mining and geological conditions and the size of the pillars

Measurement of the e+e−→K+K−π+π−e^+e^- \to K^+K^-\pi^+\pi^- cross section with the CMD-3 detector at the VEPP-2000 collider

The process $e^+e^- \to K^+K^-\pi^+\pi^-$ has been studied in the center-of-mass energy range from 1500 to 2000\,MeV using a data sample of 23 pb$^{-1}$ collected with the CMD-3 detector at the VEPP-2000 $e^+e^-$ collider. Using about 24000 selected events, the $e^+e^- \to K^+K^-\pi^+\pi^-$ cross section has been measured with a systematic uncertainty decreasing from 11.7\% at 1500-1600\,MeV to 6.1\% above 1800\,MeV. A preliminary study of $K^+K^-\pi^+\pi^-$ production dynamics has been performed

Study of the process e+e−→ppˉe^+e^-\to p\bar{p} in the c.m. energy range from threshold to 2 GeV with the CMD-3 detector

Using a data sample of 6.8 pb$^{-1}$ collected with the CMD-3 detector at the VEPP-2000 $e^+e^-$ collider we select about 2700 events of the $e^+e^- \to p\bar{p}$ process and measure its cross section at 12 energy ponts with about 6\% systematic uncertainty. From the angular distribution of produced nucleons we obtain the ratio $|G_{E}/G_{M}| = 1.49 \pm 0.23 \pm 0.30$

Measurement of the Pion Form Factor in the Energy Range 1.04-1.38 GeV with the CMD-2 Detector

The cross section for the process $e^+e^-\to\pi^+\pi^-$ is measured in the c.m. energy range 1.04-1.38 GeV from 995 000 selected collinear events including 860000 $e^+e^-$ events, 82000 $\mu^+\mu^-$ events, and 33000 $\pi^+\pi^-$ events. The systematic and statistical errors of measuring the pion form factor are equal to 1.2-4.2 and 5-13%, respectively.Comment: 5 pages, 2 figure