Thermal Emittance Measurement Design for Diamond Secondary Emission

Thermal emittance is a very important characteristic of cathodes. A carefully designed method of measuring the thermal emittance of secondary emission from diamond is presented. Comparison of possible schemes is carried out by simulation, and the most accessible and accurate method and values are chosen. Systematic errors can be controlled and maintained at small values, and are carefully evaluated. Aberration and limitations of all equipment are taken into account

Unique Features in Magnet Designs for R and D Energy Recovery Linac at BNL.

In this paper we describe the unique features and analysis techniques used on the magnets for a R&D Energy Recovery Linac (ERL) [1] under construction at the Collider Accelerator Department at BNL. The R&D ERL serves as a test-bed for future BNL ERLs, such as an electron-cooler-ERL at RHIC [2] and a future 20 GeV ERL electron-hadron at eRHIC [3]. Here we present select designs of various dipole and quadruple magnets which are used in Z-bend merging systems [4] and the returning loop, 3-D simulations of the fields in aforementioned magnets, particle tracking analysis, and the magnet's influence on beam parameters. We discuss an unconventional method of setting requirements on the quality of magnetic field and transferring them into measurable parameters as well as into manufacturing tolerances. We compare selected simulation with results of magnetic measurements. A 20 MeV R&D ERL (Fig. 1) is in an advanced phase of construction at the Collider-Accelerator Department at BNL, with commissioning planned for early 2009. In the R&D ERL, an electron beam is generated in a 2 MeV superconducting RF photo-gun, next is accelerated to 20 MeV in a 5 cell SRF linac, subsequently passed through a return loop, then decelerated to 2 MeV in the SRF linac, and finally is sent to a beam dump. The lattice of the R&D ERL is designed with a large degree of flexibility to enable the covering of a vast operational parameter space: from non-achromatic lattices to achromatic with positive, zero and negative R56 parameter. It also allows for large range tunability of Rlz and lattice RS4 parameters (which are important for transverse beam-break-up instability). Further details of the R&D ERL can be found elsewhere in these proceedings [5]. The return loop magnets are of traditional design with the following exceptions: (a) The bending radius of the 60{sup o} dipole magnets is 20 cm, which is rather small. We use 15{sup o} edges on both sides of the dipoles to split very strong focusing evenly between the horizontal and vertical planes (so-called chevron-magnet). (b) The requirements on field quality of the loop's quadrupoles had been determined by the requirement to preserve a very low normalized transverse slice emittance of electron beam ({var_epsilon} {approx} 1 mm-mrad). We used direct tracking of a sample electron beam to verify a high degree of the emittance preservation. (c) Each quadrupole is equipped with a dipole trim coil, which can be also used to excite a sextupole component, if required, for emittance preservation of e-beam with a large energy spread. One of the unique features of all ERLs is the necessity for merging low and high energy electron beams. In the R&D ERL, 2 MeV from the SRF gun merges with the 20 MeV electron beam coming around the return loop into the same trajectory at a position within the SRF linac. In the linac, injected bunch is accelerated to 20 MeV, while the returned or ''used'' bunch is decelerated to 2 MeV. The challenge for a merger design is to provide conditions for emittance compensation [5] and also for achromatic conditions of a low energy, space-charge dominated-e-beam [4,6]. The scheme which satisfies these requirements (called 2-bend [4]) is used on the R&D ERL. The Z-bend is approximately 4-meter long. It bends the beam trajectory in the vertical plane. It is comprised of four dipole magnets designed to be equally focusing in both planes, with bending radius {approx} 60 cm, and bending angles of: +15{sup o}, -30{sup o}, +30{sup o} and -15{sup o}. The beam dynamics in the Z-bend results in a large-size (centimeters) near-laminar electron beam [7]. The large beam size and very low slice emittance of the e-beam dictates the tolerances on the magnetic field to be very tight. The integrated nonlinear kicks should not exceed {approx} 20 micro-radian per magnet at a typical radius {approx} 1 cm. The magnets in the Z-bend are rather short (15 cm effective length for the 15{sup o} magnet) and have a rather large aperture of 6 cm. Analysis predicts that the influence of various field components on the emittance growth are complicated by the fact that the beam trajectory bends significantly in the Einge fields. Hence, we decided to use direct tracking in the calculated fields extracted from Opera3d of test beam to evaluate and to minimize influence of magnetic field on the beam emittance. In addition, we used predictions of Opera3d and compared them with results of magnetic measurements for the return loop dipole and quadrupole. One of the features of the loop magnets is that they are fabricated with a very high geometric tolerance, allowing them to be an excellent test bed for bench-marking our predictions. Agreement with the prediction provides us with sufficient confidence that Z-bend magnets will preserve beam emittance

FEL potential of eRHIC

Brookhaven National Laboratory plans to build a 5-to-30 GeV energy-recovery linac (ERL) for its future electron-ion collider, eRHIC. In past few months, the Laboratory turned its attention to the potential of this unique machine for free electron lasers (FELS), which we initially assessed earlier. In this paper, we present our current vision of a possible FEL farm, and of narrow-band FEL-oscillators driven by this accelerator. eRHIC, the proposed electron-ion collider at BNL, takes advantage of the existing Relativistic Heavy Ion Collider (RHIC) complex. Plans call for adding a six-pass super-conducting (SRF) ERL to this complex to collide polarized- and unpolarized- electron beams with heavy ions (with energies up to 130 GeV per nucleon) and with polarized protons (with energies up to 325 GeV). RHIC, with a circumference of 3.834 km, has three-fold symmetry and six straight sections each {approx} 250 m long. Two of these straight sections will accommodate 703-MHz SRF linacs. The maximum energy of the electron beam in eRHIC will be reached in stages, from 5 GeV to 30 GeV, by increasing the lengths of its SRF linacs. We plan to install at the start the six-pass magnetic system with small gap magnets. The structure of the eRHIC's electron beam will be identical with that of its hadron beam, viz., 166 bunches will be filled, reserving about a one-microsecond gap for the abort kicker. With modest modifications, we can assure that eRHIC's ERL will become an excellent driver for continuous wave (CW) FELs (see Fig.1). The eRHIC's beam structure will support the operation of several such FELs in parasitic mode

A Large Hadron Electron Collider at CERN

This document provides a brief overview of the recently published report on the design of the Large Hadron Electron Collider (LHeC), which comprises its physics programme, accelerator physics, technology and main detector concepts. The LHeC exploits and develops challenging, though principally existing, accelerator and detector technologies. This summary is complemented by brief illustrations of some of the highlights of the physics programme, which relies on a vastly extended kinematic range, luminosity and unprecedented precision in deep inelastic scattering. Illustrations are provided regarding high precision QCD, new physics (Higgs, SUSY) and electron-ion physics. The LHeC is designed to run synchronously with the LHC in the twenties and to achieve an integrated luminosity of O(100) fb$^{-1}$. It will become the cleanest high resolution microscope of mankind and will substantially extend as well as complement the investigation of the physics of the TeV energy scale, which has been enabled by the LHC

Design aspects of an electrostatic electron cooler for low-energy RHIC operation

Electron cooling was proposed to increase the luminosity of the Relativistic Heavy Ion Collider (RHIC) operation for heavy ion beam energies below 10 GeV/nucleon. The electron cooling system needed should be able to deliver an electron beam of adequate quality in a wide range of electron beam energies (0.9-5 MeV). An option of using an electrostatic accelerator to produce electrons for cooling heavy ions in RHIC was evaluated in detail. In this paper, we describe the requirements and options which were considered in the design of such a cooler for RHIC, as well as the associated challenges. The expected luminosity improvement and limitations with such an electron cooling system are also discussed

FPC conditioning cart at BNL

The 703 MHz superconducting gun for the BNL Energy Recovery Linac (ERL) prototype has two fundamental power couplers (FPCs), and each of them will deliver up to 500 kW of CW RF power. In order to prepare the couplers for high power RF service and process multipacting, the FPCs should be conditioned prior to installation into the gun cryomodule. A conditioning cart based test stand, which includes a vacuum pumping system, controllable bake-out system, diagnostics, interlocks and data log system has been designed, constructed and commissioned by collaboration of BNL and AES. This paper presents FPC conditioning cart systems and the conditioning process

Superconducting Photoinjector

One of the frontiers in FEL science is that of high power. In order to reach power in the megawatt range, one requires a current of the order of one ampere with a reasonably good emittance. The superconducting laser-photocathode RF gun with a high quantum efficiency photocathode is the most natural candidate to provide this performance. The development of a 1/2 cell superconducting photoinjector designed to operate at up to a current of 0.5 amperes and beam energy of 2 MeV and its photocathode system are the subjects covered in this paper. The main issues are the photocathode and its insertion mechanism, the power coupling and High Order Mode damping. This technology is being developed at BNL for DOE nuclear physics applications such as electron cooling at high energy and electron ion colliders.