3,031 research outputs found
In situ characterization of vertically oriented carbon nanofibers for three-dimensional nano-electro-mechanical device applications
We have performed mechanical and electrical characterization of individual as-grown, vertically oriented carbon nanofibers (CNFs) using in situ techniques, where such high-aspect-ratio, nanoscale structures are of interest for three-dimensional (3D) electronics, in particular 3D nano-electro-mechanical-systems (NEMS). Nanoindentation and uniaxial compression tests conducted in an in situ nanomechanical instrument, SEMentor, suggest that the CNFs undergo severe bending prior to fracture, which always occurs close to the bottom rather than at the substrate–tube interface, suggesting that the CNFs are well adhered to the substrate. This is also consistent with bending tests on individual tubes which indicated that bending angles as large as ~70° could be accommodated elastically. In situ electrical transport measurements revealed that the CNFs grown on refractory metallic nitride buffer layers were conducting via the sidewalls, whereas those synthesized directly on Si were electrically unsuitable for low-voltage dc NEMS applications. Electrostatic actuation was also demonstrated with a nanoprobe in close proximity to a single CNF and suggests that such structures are attractive for nonvolatile memory applications. Since the magnitude of the actuation voltage is intimately dictated by the physical characteristics of the CNFs, such as diameter and length, we also addressed the ability to tune these parameters, to some extent, by adjusting the plasma-enhanced chemical vapor deposition growth parameters with this bottom-up synthesis approach
Affine Lie Algebras in Massive Field Theory and Form-Factors from Vertex Operators
We present a new application of affine Lie algebras to massive quantum field
theory in 2 dimensions, by investigating the limit of the q-deformed
affine symmetry of the sine-Gordon theory, this limit occurring
at the free fermion point. Working in radial quantization leads to a
quasi-chiral factorization of the space of fields. The conserved charges which
generate the affine Lie algebra split into two independent affine algebras on
this factorized space, each with level 1 in the anti-periodic sector, and level
in the periodic sector. The space of fields in the anti-periodic sector can
be organized using level- highest weight representations, if one supplements
the \slh algebra with the usual local integrals of motion. Introducing a
particle-field duality leads to a new way of computing form-factors in radial
quantization. Using the integrals of motion, a momentum space bosonization
involving vertex operators is formulated. Form-factors are computed as vacuum
expectation values in momentum space. (Based on talks given at the Berkeley
Strings 93 conference, May 1993, and the III International Conference on
Mathematical Physics, String Theory, and Quantum Gravity, Alushta, Ukraine,
June 1993.)Comment: 13 pages, CLNS 93/125
Carbon Nanofibers Synthesized on Selective Substrates for Nonvolatile Memory and 3D Electronics
A plasma-enhanced chemical vapor deposition (PECVD) growth technique has been developed where the choice of starting substrate was found to influence the electrical characteristics of the resulting carbon nanofiber (CNF) tubes. It has been determined that, if the tubes are grown on refractory metallic nitride substrates, then the resulting tubes formed with dc PECVD are also electrically conducting. Individual CNFs were formed by first patterning Ni catalyst islands using ebeam evaporation and liftoff. The CNFs were then synthesized using dc PECVD with C2H2:NH3 = [1:4] at 5 Torr and 700 C, and approximately equal to 200-W plasma power. Tubes were grown directly on degenerately doped silicon substrates with resistivity rho approximately equal to 1-5 meterohm-centimeter, as well as NbTiN. The approximately equal to 200-nanometer thick refractory NbTiN deposited using magnetron sputtering had rho approximately equal to 113 microohm-centimeter and was also chemically compatible with CNF synthesis. The sample was then mounted on a 45 beveled Al holder, and placed inside a SEM (scanning electron microscope). A nanomanipulator probe stage was placed inside the SEM equipped with an electrical feed-through, where tungsten probes were used to make two-terminal electrical measurements with an HP 4156C parameter analyzer. The positive terminal nanoprobe was mechanically manipulated to physically contact an individual CNF grown directly on NbTiN as shown by the SEM image in the inset of figure (a), while the negative terminal was grounded to the substrate. This revealed the tube was electrically conductive, although measureable currents could not be detected until approximately equal to 6 V, after which point current increased sharply until compliance (approximately equal to 50 nA) was reached at approximately equal to 9.5 V. A native oxide on the tungsten probe tips may contribute to a tunnel barrier, which could be the reason for the suppressed transport at low biases. Currents up to approximately 100 nA could be cycled, which are likely to propagate via the tube surface, or sidewalls, rather than the body, which is shown by the I-V in figure (a). Electrical conduction via the sidewalls is a necessity for dc NEMS (nanoelectromechanical system) applications, more so than for the field emission applications of such tubes. During the tests, high conductivity was expected, because both probes were shorted to the substrate, as shown by curve 1 in the I-V characteristic in figure (b). When a tube grown on NbTiN was probed, the response was similar to the approximately equal to 100 nA and is represented by curve 2 in figure (b), which could be cycled and propagated via the tube surface or the sidewalls. However, no measureable currents for the tube grown directly on Si were observed as shown by curve 3 in figure (b), even after testing over a range of samples. This could arise from a dielectric coating on the sidewalls for tubes on Si. As a result of the directional nature of ion bombardment during dc PECVD, Si from the substrate is likely re-sputtered and possibly coats the sidewalls
Spin correlations and exchange in square lattice frustrated ferromagnets
The J1-J2 model on a square lattice exhibits a rich variety of different
forms of magnetic order that depend sensitively on the ratio of exchange
constants J2/J1. We use bulk magnetometry and polarized neutron scattering to
determine J1 and J2 unambiguously for two materials in a new family of vanadium
phosphates, Pb2VO(PO4)2 and SrZnVO(PO4)2, and we find that they have
ferromagnetic J1. The ordered moment in the collinear antiferromagnetic ground
state is reduced, and the diffuse magnetic scattering is enhanced, as the
predicted bond-nematic region of the phase diagram is approached.Comment: 4 pages, 4 figure
Chiral Vertex Operators in Off-Conformal Theory: The Sine-Gordon Example
We study chiral vertex operators in the sine-Gordon [SG] theory, viewed as an
off-conformal system. We find that these operators, which would have been
primary fields in the conformal limit, have interesting and, in some ways,
unexpected properties in the SG model. Some of them continue to have scale-
invariant dynamics even in the presence of the non-conformal cosine
interaction. For instance, it is shown that the Mandelstam operator for the
bosonic representation of the Fermi field does {\it not} develop a mass term in
the SG theory, contrary to what the real Fermi field in the massive Thirring
model is expected to do. It is also shown that in the presence of the
non-conformal interactions, some vertex operators have unique Lorentz spins,
while others do not.Comment: 32 pages, Univ. of Illinois Preprint # ILL-(TH)-93-1
Artificial Neural Network-based error compensation procedure for low-cost encoders
An Artificial Neural Network-based error compensation method is proposed for
improving the accuracy of resolver-based 16-bit encoders by compensating for
their respective systematic error profiles. The error compensation procedure,
for a particular encoder, involves obtaining its error profile by calibrating
it on a precision rotary table, training the neural network by using a part of
this data and then determining the corrected encoder angle by subtracting the
ANN-predicted error from the measured value of the encoder angle. Since it is
not guaranteed that all the resolvers will have exactly similar error profiles
because of the inherent differences in their construction on a micro scale, the
ANN has been trained on one error profile at a time and the corresponding
weight file is then used only for compensating the systematic error of this
particular encoder. The systematic nature of the error profile for each of the
encoders has also been validated by repeated calibration of the encoders over a
period of time and it was found that the error profiles of a particular encoder
recorded at different epochs show near reproducible behavior. The ANN-based
error compensation procedure has been implemented for 4 encoders by training
the ANN with their respective error profiles and the results indicate that the
accuracy of encoders can be improved by nearly an order of magnitude from
quoted values of ~6 arc-min to ~0.65 arc-min when their corresponding
ANN-generated weight files are used for determining the corrected encoder
angle.Comment: 16 pages, 4 figures. Accepted for Publication in Measurement Science
and Technology (MST
Spin-orbit tuned metal-insulator transitions in single-crystal Sr2Ir1-xRhxO4 (0\leqx\leq1)
Sr2IrO4 is a magnetic insulator driven by spin-orbit interaction (SOI)
whereas the isoelectronic and isostructural Sr2RhO4 is a paramagnetic metal.
The contrasting ground states have been shown to result from the critical role
of the strong SOI in the iridate. Our investigation of structural, transport,
magnetic and thermal properties reveals that substituting 4d Rh4+ (4d5) ions
for 5d Ir4+(5d5) ions in Sr2IrO4 directly reduces the SOI and rebalances the
competing energies so profoundly that it generates a rich phase diagram for
Sr2Ir1-xRhxO4 featuring two major effects: (1) Light Rh doping (0\leqx\leq0.16)
prompts a simultaneous and precipitous drop in both the electrical resistivity
and the magnetic ordering temperature TC, which is suppressed to zero at x =
0.16 from 240 K at x=0. (2) However, with heavier Rh doping (0.24< x<0.85
(\pm0.05)) disorder scattering leads to localized states and a return to an
insulating state with spin frustration and exotic magnetic behavior that only
disappears near x=1. The intricacy of Sr2Ir1-xRhxO4 is further highlighted by
comparison with Sr2Ir1-xRuxO4 where Ru4+(4d4) drives a direct crossover from
the insulating to metallic states.Comment: 5 figure
Epitaxial Stabilization of Ultrathin Films of Rare-Earth Nickelates
We report on the synthesis of ultrathin films of highly distorted EuNiO3
(ENO) grown by interrupted pulse laser epitaxy on YAlO3 (YAO) substrates.
Through mapping the phase space of nickelate thin film epitaxy, the optimal
growth temperatures were found to scale linearly with the Goldschmidt tolerance
factor. Considering the gibbs energy of the expanding film, this empirical
trend is discussed in terms of epitaxial stabilization and the escalation of
the lattice energy due to lattice distortions and decreasing symmetry. These
findings are fundamental to other complex oxide perovskites, and provide a
route to the synthesis of other perovskite structures in ultrathin-film form.Comment: 7 pages, 3 figure
- …