The effect of noise, a constant background, and bit depth on the phase retrieval of pure phase objects

Acknowledgements – The authors are supported by the postdoctoral project (1.1.1.2/16/I/001; 1.1.1.2/ VIAA/1/16/199, State Education Development Agency, Republic of Latvia).In the current study, we investigate the effect of uniform white noise, Poisson noise and a constant background on the phase retrieval of pure phase objects. We also study the influence of the aforementioned factors on phase retrieval at different bit depths of intensity measurements. An algorithm called PhaseLift is used for phase retrieval as it requires a small number of modulating masks and can retrieve the phase of an object from sparse intensity measurements of low bit depth. A test object is modulated by eight random masks generated from a single mask and the phase of the object is retrieved from coded diffraction patterns. Different levels of uniform white noise, Poisson noise and constant background are superimposed on the diffraction patterns and the root-mean-square error (RMSE) of the retrieved object is calculated at each level. The results suggest that Poisson noise and a constant background at the same level cause similar RMSE compared to uniform white noise. Lowering the bit depth from 18-bits to 14-bits resulted in the decrease of the RMSE caused by Poisson noise and a constant background. We conclude that the effects of noise and constant background can be reduced by lowering the bit depth. © 2021 WrocÅ‚aw University of Science and Technology. All rights reserved.State Education Development Agency Republic of Latvia 1.1.1.2/16/I/001; 1.1.1.2/ VIAA/1/16/199; The Institute of Solid State Physics, University of Latvia (Latvia), as the Centre of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-Teaming Phase2 under grant agreement No. 739508, project CAMART2

The Effect of the Range of a Modulating Phase Mask on the Retrieval of a Complex Object from Intensity Measurements

The authors have been supported by the postdoctoral project (1.1.1.2/16/I/001, 1.1.1.2/VIAA/1/16/199), the CAMART2 project (grant agreement ID 739508), the Latvian Investment and Development Agency (LIDA) project (KC-PI-2017/105), and the grant for the Latvian State Emeritus Scientists.In many fields of science, it is often impossible to preserve the information about the phase of the electromagnetic field, and only the information about the magnitude is available. This is known as the phase problem. Various algorithms have been proposed to recover the information about phase from intensity measurements. Nowadays, iterative algorithms of phase retrieval have become popular. Many of these algorithms are based on modulating the object under study with several masks and retrieving the missing information about the phase of an object by applying mathematical optimization methods. Several of these algorithms are able to retrieve not only the phase but also the magnitude of the object under study. In this study, we investigate the effect of the range of modulation of a mask on the accuracy of the retrieved magnitude and phase map. We conclude that there is a sharp boundary of the range of modulation separating the successfully retrieved magnitude and phase maps from those retrieved unsuccessfully. A decrease in the range of modulation affects the accuracy of the retrieved magnitude and phase map differently. © 2021 V. Karitans et al., published by Sciendo. This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.Postdoctoral project (1.1.1.2/16/I/001, 1.1.1.2/VIAA/1/16/199); the Latvian Investment and Development Agency (LIDA) project (KC-PI-2017/105), and the grant for the Latvian State Emeritus Scientists; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART2

Portable low-cost open-source wireless spectrophotometer for fast and reliable measurements

This article is based upon COST Action CA16215 and supported by the ERDF , European-Union Project No.1.1.1.2/16/I/001.We demonstrate a low-cost standalone portable spectrophotometer for fast and reliable measurement execution. The data acquired can be both displayed via a dedicated smartphone application or a computer interface, allowing users either to gather and view data on the move or set up a continuous experiment. All design and software files are open-source and are intended for the device to be easily replicable and further customizable to suit specific applications. The assembled device can measure absorption in the wavelength range from 450 nm to 750 nm with a resolution of 15 nm and is housed in a 90 × 85 × 58 mm casing. Validation of the device was carried out by assessing wavelength accuracy, dynamic range and the signal-to-noise ratio of the system, followed by testing in three different applications where limit of quantification, limit of detection and relative standard deviations were determined. The results indicated better performance than low-cost spectrophotometers, on average being comparable to moderate to high-cost spectrophotometers.European Regional Development Fund 1.1.1.2/16/I/001; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART²https://www.sciencedirect.com/science/article/pii/S246806722030016

Dependence of Perceived Purity of a Chromatic Stimulus on Saturation Adaptation

Background and Objective. The purpose of sensory adaptation of the visual system is to adjust sensitivity of the photoreceptors to optimize the dynamic range of response of the visual system. It has been shown in numerous research papers that chromatic adaptation influences both color appearance and color discrimination. However, there are almost no studies in which the influence of chromatic adaptation on perceived purity has been investigated. Therefore, the aim of this study was to investigate how chromatic adaptation to stimuli with certain saturation influences perceived purity of test stimuli with the same hue but different saturation. Material and Methods. As the stimuli were modulated in saturation only, we refer to the type of chromatic adaptation used in our study as saturation adaptation. Two types of psychophysical methods – the method of adjustment and the method of constant stimuli – were used. Results. The results obtained with the method of constant stimuli reveal that saturation adaptation seems to be nonlinear much the same way as the Bezold-Brücke and the Abney effect. In addition, hysteresis of saturation adaptation can be observed in the method of adjustment. Conclusions. Pronounced hysteresis of perceived color purity was observed when approaching to the point of subjective equality from the side of low saturation of the matching stimulus compared with the side of high saturation of the matching stimulus. There was a time course of mechanisms of saturation adaptation similar to those of chromatic adaptation previously quoted in literature

Color stimuli perception in presence of light scattering

Perception of different color contrast stimuli was studied in the presence of light scattering: in a fog chamber in Clermont-Ferrand and in laboratory conditions where light scattering of similar levels was obtained, using different light scattering eye occluders. Blue (shortest wavelength) light is scattered in fog to the greatest extent, causing deterioration of vision quality especially for the monochromatic blue stimuli.However, for the color stimuli presented on a white background, visual acuity in fog for blue Landolt-C optotypes was higher than for red and green optotypes on the white background. The luminance of color Landolt-C optotypes presented on a LCD screen was chosen corresponding to the blue, green, and red color contributions in achromatic white stimuli (computer digital R, G, or B values for chromatic stimuli equal to RGB values in the achromatic white background) that results in the greatest luminance contrast for the whiteblue stimuli, thus advancing the visual acuity for the white-blue stimuli. Besides such blue stimuli on the white background are displayed with a uniform, spatially unmodulated distribution of the screen blue phosphor emission over the entire area of the screen including the stimulus C optotype area. It follows that scattering, which has the greatest effect on the blue component of screen luminance, has the least effect on the perception of whiteblue stimuli