Antioxidant Effects of Bioactive Glasses (BGs) and Their Significance in Tissue Engineering Strategies

Elevated levels of oxidative stress are usually observed following injuries, leading to impaired tissue repair due to oxidation-related chronic inflammation. Several attempts have been made to manage this unfavorable situation, and the use of biomaterials with antioxidant activity is showing great promise in tissue engineering and regenerative medicine approaches. Bioactive glasses (BGs) are a versatile group of inorganic substances that exhibit an outstanding regenerative capacity for both hard and soft damaged tissues. The chemical composition of BGs provides a great opportunity for imparting specific biological activities to them. On this point, BGs may easily become antioxidant substances through simple physicochemical modifications. For example, particular antioxidant elements (mostly cerium (Ce)) can be added to the basic composition of the glasses. On the other hand, grafting natural antioxidant substances (e.g., polyphenols) on the BG surface is feasible for making antioxidant substitutes with promising results in vitro. Mesoporous BGs (MBGs) were demonstrated to have unique merits compared with melt-derived BGs since they make it possible to load antioxidants and deliver them to the desired locations. However, there are actually limited in vivo experimental studies on the capability of modified BGs for scavenging free radicals (e.g., reactive oxygen species (ROS)). Therefore, more research is required to determine the actual potential of BGs in decreasing oxidative stress and subsequently improving tissue repair and regeneration. The present work aims to highlight the potential of different types of BGs in modulating oxidative stress and subsequently improving tissue healing

Cerebrospinal fluid lead level in patients with idiopathic seizure

Background: Convulsion is one of the common cause of hospital admission in children. Idiopathic seizure is when no anatomic, electrolytic, metabolic or hemorrhagic causes are found. Recently, lead poisoning, which is considered when serum lead levels are higher than the normal levels (previously 10 µg/dl changed to 5 µg/dl). Even lower levels of lead inflict harmful consequences in central nervous system (CNS) development in pediatric group. Due to air pollution and high lead level in air of Tehran, investigation the probable role of lead in producing or predisposing convulsion in children is very important. To determine the cerebrospinal fluid (CSF) lead level in children with idiopathic convulsion in compare with nonconvulsive ones (control). Methods: A case-control study upon 60 children (30 convulsive and 30 nonconvulsive control) admitted in Rasoul Akram and Ali Asghar University Hospitals, Tehran, from 2012 to 2013 had done. One ml of CSF obtained and lead level determined by atomic absorption test. Results: The mean age between cases and controls was not different (mean= 30.18+27.36 vs 25.46±20.56 months, P= 0.1). The CSF lead level (µg/dl) had not meaningful difference between 2 groups (3.43+3.07 vs 2.78+2.77, P= 0.3), and no related to type of convulsion in cases (P= 0.7), the area under the curve (AUC) was 0.588; 1-0.433, P= 0.2). The CSF lead cutoff was 1.65 µg/dl; sensitivity of 70, specificity of 46, PPV and NPV was 56 and 60 respectively. Conclusion: The toxic blood level for lead is 3.5 µg/dl. The CSF lead level; even in little amount (1.65 µg/dl) is an acceptable sensitivity but lower specificity for differentiation the convulsive from nonconvulsive children. Although the role of genetic and other causes should be considered in idiopathic convulsion, probably, the high level of lead in CSF could predispose those children to convulsion. It can effect CNS development in children even in small amounts. Indeed, long-term effects of lead which continue to adulthood should be considered as well. Hence, it is paramount to rectify the ambient air lead pollution in Tehran. © 2015 Tehran University of Medical Sciences. All rights reserved

Biomedical waste management by using nanophotocatalysts: The need for new options

Biomedical waste management is getting significant consideration among treatment technologies, since insufficient management can cause danger to medicinal service specialists, patients, and their environmental conditions. The improvement of waste administration protocols, plans, and policies are surveyed, despite setting up training programs on legitimate waste administration for all healthcare service staff. Most biomedical waste substances do not degrade in the environment, and may also not be thoroughly removed through treatment processes. Therefore, the long-lasting persistence of biomedical waste can effectively have adverse impact on wildlife and human beings, as well. Hence, photocatalysis is gaining increasing attention for eradication of pollutants and for improving the safety and clearness of the environment due to its great potential as a green and eco-friendly process. In this regard, nanostructured photocatalysts, in contrast to their regular counterparts, exhibit significant attributes such as non-toxicity, low cost and higher absorption efficiency in a wider range of the solar spectrum, making them the best candidate to employ for photodegradation. Due to these unique properties of nanophotocatalysts for biomedical waste management, we aim to critically evaluate various aspects of these materials in the present review and highlight their importance in healthcare service settings

Biomedical radioactive glasses for brachytherapy

The fight against cancer is an old challenge for mankind. Apart from surgery and chemo-therapy, which are the most common treatments, use of radiation represents a promising, less inva-sive strategy that can be performed both from the outside or inside the body. The latter approach, also known as brachytherapy, relies on the use of implantable beta-emitting seeds or microspheres for killing cancer cells. A set of radioactive glasses have been developed for this purpose but their clinical use is still mainly limited to liver cancer. This review paper provides a picture of the bio-medical glasses developed and experimented for brachytherapy so far, focusing the discussion on the production methods and current limitations of the available options to their diffusion in clinical practice. Highly-durable neutron-activatable glasses in the yttria-alumina-silica oxide system are typically preferred in order to avoid the potentially-dangerous release of radioisotopes, while the compositional design of degradable glass systems suitable for use in radiotherapy still remains a challenge and would deserve further investigation in the near future

Additive manufacturing of bioactive glass biomaterials

Tissue engineering (TE) and regenerative medicine have held great promises for the repair and regeneration of damaged tissues and organs. Additive manufacturing has recently appeared as a versatile technology in TE strategies that enables the production of objects through layered printing. By applying 3D printing and bioprinting, it is now possible to make tissue-engineered constructs according to desired thickness, shape, and size that resemble the native structure of lost tissues. Up to now, several organic and inorganic materials were used as raw materials for 3D printing; bioactive glasses (BGs) are among the most hopeful substances regarding their excellent properties (e.g., bioactivity and biocompatibility). In addition, the reported studies have confirmed that BG-reinforced constructs can improve osteogenic, angiogenic, and antibacterial activities. This review aims to provide an up-to-date report on the development of BG-containing raw biomaterials that are currently being employed for the fabrication of 3D printed scaffolds used in tissue regeneration applications with a focus on their advantages and remaining challenges

Zinc- and Copper-Doped Mesoporous Borate Bioactive Glasses: Promising Additives for Potential Use in Skin Wound Healing Applications

In this study, zinc (Zn)- and copper (Cu)-doped 13-93B3 borate mesoporous bioactive glasses (MBGs) were successfully synthesized using nitrate precursors in the presence of Pluronic P123. We benefited from computational approaches for predicting and confirming the experimental findings. The changes in the dynamic surface tension (SFT) of simulated body fluid (SBF) were investigated using the Du Noüy ring method to shed light on the mineralization process of hydroxyapatite (HAp) on the glass surface. The obtained MBGs were in a glassy state before incubation in SBF. The formation of an apatite-like layer on the SBF-incubated borate glasses was investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The incorporation of Zn and Cu into the basic composition of 13-93B3 glass led to changes in the glass transition temperature (Tg) (773 to 556 °C), particle size (373 to 64 nm), zeta potential (−12 to −26 mV), and specific surface area (SBET) (54 to 123 m2/g). Based on the K-means algorithm and chi-square automatic interaction detection (CHAID) tree, we found that the SFT of SBF is an important factor for the prediction and confirmation of the HAp mineralization process on the glasses. Furthermore, we proposed a simple calculation, based on SFT variation, to quantify the bioactivity of MBGs. The doped and dopant-free borate MBGs could enhance the proliferation of mouse fibroblast L929 cells at a concentration of 0.5 mg/mL. These glasses also induced very low hemolysis (<5%), confirming good compatibility with red blood cells. The results of the antibacterial test revealed that all the samples could significantly decrease the viability of Pseudomonas aeruginosa. In summary, we showed that Cu-/Zn-doped borate MBGs can be fabricated using a cost-effective method and also show promise for wound healing/skin tissue engineering applications, as especially supported by the cell test with fibroblasts, good compatibility with blood, and antibacterial properties

Three-dimensionally printed polycaprolactone/multicomponent bioactive glass scaffolds for potential application in bone tissue engineering

Over the last years, three-dimensional (3D) printing has been successfully applied to produce suitable substitutes for treating bone defects. In this work, 3D printed composite scaffolds of polycaprolactone (PCL) and strontium (Sr)- and cobalt (Co)-doped multi-component melt-derived bioactive glasses (BGs) were prepared for bone tissue engineering strategies. For this purpose, 30 of as-prepared BG particles (size <38 μm) were incorporated into PCL, and then the obtained composite mix was introduced into a 3D printing machine to fabricate layer-by-layer porous structures with the size of 12 � 12 � 2 mm3. The scaffolds were fully characterized through a series of physico-chemical and biological assays. Adding the BGs to PCL led to an improvement in the compressive strength of the fabricated scaffolds and increased their hydrophilicity. Furthermore, the PCL/BG scaffolds showed apatite-forming ability (i.e., bioactivity behavior) after being immersed in simulated body fluid (SBF). The in vitro cellular examinations revealed the cytocompatibility of the scaffolds and confirmed them as suitable substrates for the adhesion and proliferation of MG-63 osteosarcoma cells. In conclusion, 3D printed composite scaffolds made of PCL and Sr- and Co-doped BGs might be potentially-beneficial bone replacements, and the achieved results motivate further research on these materials. © 2020 Amirhosein Fathi et al., published by De Gruyter 2020

Fabrication and characterization of cobalt- and copper-doped mesoporous borate bioactive glasses for potential applications in tissue engineering

Developing novel compositions of bioactive glasses (BGs) is key for accelerating tissue repair and regeneration. In this work, we developed a series of cobalt (Co)- and copper (Cu)-doped mesoporous bioactive glasses (MBGs) based on borate 13-93B3 composition using nitrate precursors. We took benefit from data science algorithms to predict and assess the physico-chemical and biological properties of the samples. The results showed that the presence of the dopants (Co and Cu) in the MBGs could change the glass transition temperature (Tg) (from 773 to 539 °C), the zeta potential (from -12 to -43 mV), and surface area (from 54 to 194 m2/g). However, the presence of 2.5 mol% of dopants in the composition led to just a slight decrease in their bioactivity. In vitro biocompatibility assays confirmed that all the glass samples were biocompatible. Furthermore, the doped MBGs exhibited potent antibacterial activity against both Gram-positive and Gram-negative bacteria. In addition, these glasses could induce the mobility of human umbilical vein endothelial cells (HUVECs) and enhance new blood vessel formation in ovo. According to the obtained data, it can be stated that this type of doped borate MBGs held great promise in tissue engineering applications

Three-dimensional bio-printing and bone tissue engineering: technical innovations and potential applications in maxillofacial reconstructive surgery

Background Bone grafting has been considered the gold standard for hard tissue reconstructive surgery and is widely used for large mandibular defect reconstruction. However, the midface encompasses delicate structures that are surrounded by a complex bone architecture, which makes bone grafting using traditional methods very challenging. Three-dimensional (3D) bioprinting is a developing technology that is derived from the evolution of additive manufacturing. It enables precise development of a scaffold from different available biomaterials that mimic the shape, size, and dimension of a defect without relying only on the surgeon’s skills and capabilities, and subsequently, may enhance surgical outcomes and, in turn, patient satisfaction and quality of life. Review This review summarizes different biomaterial classes that can be used in 3D bioprinters as bioinks to fabricate bone scaffolds, including polymers, bioceramics, and composites. It also describes the advantages and limitations of the three currently used 3D bioprinting technologies: inkjet bioprinting, micro-extrusion, and laser-assisted bioprinting. Conclusions Although 3D bioprinting technology is still in its infancy and requires further development and optimization both in biomaterials and techniques, it offers great promise and potential for facial reconstruction with improved outcome

Folic acid supplementation in postmenopausal women with hot flushes: phase III randomised double-blind placebo-controlled trial

Objective To assess whether folic acid supplementation ameliorates hot flushes. Design Double-blind, placebo-controlled randomised trial. Setting Nine hospitals in England. Population Postmenopausal women experiencing ≥50 hot flushes weekly. Methods Women (n = 164) were randomly assigned in a 1:1 ratio to receive folic acid 5 mg tablet or placebo daily for 12 weeks. Participants recorded frequency and severity of hot flushes in a Sloan Diary daily and completed Greene Climacteric and Utian Quality of Life (UQoL) Scales at 4-week intervals. Main outcome measures The change in daily Hot Flush Score at week 12 from randomisation based on Sloan Diary Composite Score B calculation. Results Data of 143 (87%) women were available for the primary outcome. The mean change (SD) in Hot Flush Score at week 12 was −6.98 (10.30) and −4.57 (9.46) for folic acid and placebo group, respectively. The difference between groups in the mean change was −2.41 (95% CI −5.68 to 0.87) (P = 0.149) and in the adjusted mean change −2.61 (95% CI −5.72 to 0.49) (P = 0.098). Analysis of secondary outcomes indicated an increased benefit in the folic acid group regarding changes in total and emotional UQoL scores at week 8 when compared with placebo. The difference in the mean change from baseline was 5.22 (95% CI 1.16–9.28) and 1.88 (95% CI 0.23–3.52) for total and emotional score, respectively. Conclusions The study was not able to demonstrate that folic acid had a statistically significant greater benefit in reducing Hot Flush Score over 12 weeks in postmenopausal women when compared with placebo. Tweetable abstract Folic acid may ameliorate hot flushes in postmenopausal women but confirmation is required from a larger study