Ni-dispersed fullerenes: Hydrogen storage and desorption properties

Our study shows that the H2 storage media using Ni-dispersed fullerenes could be viable alternatives to reversible hydrogen storage. It is demonstrated that a single Ni coated on the fullerene surface can store up to three H2 molecules. Consequently, at high Ni coverage, Ni-dispersed fullerenes are considered to be the novel hydrogen storage media capable of storing ~6.8 wt % H2, thus exceeding the Department of Energy target (6.5 wt %) for automobile applications. Moreover, the H2 desorption activation barrier of 11.8 kcal/mol H2 is ideal for many practical hydrogen storage applications

GW Calculations on post-transition-metal oxides

In order to establish the reliable GW scheme that can be consistently applied to post-transition-metal oxides (post-TMOs), we carry out comprehensive GW calculations on electronic structures of ZnO, Ga2O3, In2O3, and SnO2, the four representative post-TMOs. Various levels of self-consistency (G0W0, GW0, and QPGW0) and different starting functionals (GGA, GGA + U, and hybrid functional) are tested and their influence on the resulting electronic structure is closely analyzed. It is found that the GW0 scheme with GGA + U as the initial functional turns out to give the best agreement with experiment, implying that describing the position of metal-d level precisely in the ground state plays a critical role for the accurate dielectric property and quasiparticle band gap. Nevertheless, the computation on ZnO still suffers from the shallow Zn-d level and we propose a modified approach (GW0+Ud) that additionally considers an effective Hubbard U term during GW0 iterations and thereby significantly improves the band gap. It is also shown that a GGA + U-based GW0(+Ud) scheme produces an accurate energy gap of crystalline InGaZnO4, implying that this can serve as a standard scheme that can be applied to general structures of post-TMOs. © 2014 American Physical Society.1991sciescopu

The effect of various design codes and dynamic magnification on buildings with torsional irregularity

Seismic provisions have utilized design eccentricities to reduce planar irregularities in lateral stiffness of buildings. In calculating a design eccentricity, the torsional amplification factor may be applied either to accidental eccentricity or to both inherent and accidental eccentricities according to design codes. In this paper, different code provisions and their impact on torsional responses of buildings are investigated using example buildings with various aspect ratios and inherent eccentricities. It was found that the design eccentricity in KBC-2009 using torsional amplification factor for only accidental eccentricity reflects the dynamic magnification more accurately than that in KBC-2006 using this factor for both inherent and accidental eccentricity. And dynamic magnification of a torsionally imbalanced building is affected by the size of seismic design force of response spectrum analysis than design eccentricity of equivalent static analysis in KBC-2009. In other words, design eccentricity including torsional amplification factor in KBC-2009 do not reflect the dynamic magnification accurately

User Recognition Based on Human Body Impulse Response: A Feasibility Study

Human recognition technologies for security systems require high reliability and easy accessibility in the advent of the internet of things (IoT). While several biometric approaches have been studied for user recognition, there are demands for more convenient techniques suitable for the IoT devices. Recently, electrical frequency responses of the human body have been unveiled as one of promising biometric signals, but the pilot studies are inconclusive about the characteristics of human body as a transmission medium for electric signals. This paper provides a multi-domain analysis of human body impulse responses (HBIR) measured at the receiver when customized impulse signals are passed through the human body. We analyzed the impulse responses in the time, frequency, and wavelet domains and extracted representative feature vectors using a proposed accumulated difference metric in each domain. The classification performance was tested using the k-nearest neighbors (KNN) algorithm and the support vector machine (SVM) algorithm on 10-day data acquired from five subjects. The average classification accuracies of the simple classifier KNN for the time, frequency, and wavelet features reached 92.99%, 77.01%, and 94.55%, respectively. In addition, the kernel-based SVM slightly improved the accuracies of three features by 0.58%, 2.34%, and 0.42%, respectively. The result shows potential of the proposed approach for user recognition based on HBIR

Structural safety inspection of reinforced concrete structures considering failure probabilities of structural members

Regular safety inspections of existing reinforced concrete (RC) structures are required according to the regulations and criteria set by each country. In South Korea, the safety inspection regulations provided by the Korea Infrastructure Safety and Technology Corporation (KISTEC) are followed. These regulations were developed based on fuzzy theory to avoid subjective decisions, and provide standardized deterioration grades for member types, floors, and the entire structure. However, the safety inspection regulation by the KISTEC often provides unconservative evaluation results. In particular, as the importance factors of beam and slab members are set lower than those of other members, there are cases in which deteriorations occurring in beams and slabs are not properly reflected in the floor level evaluation. In this study, to overcome such limitations, case studies were carried out and modified importance factors for structural member types were proposed considering the failure probabilities of each member type based on the reliability theory. The importance modification factor was calculated based on the strength ratio of structural members so that the more dangerous the members are, the more impact they give on the evaluation. Overall, compared to the KISTEC method, the proposed method provided conservative but practical assessment results, and it was found that the proposed importance factors can be very useful to properly reflect the effects of damaged members on the deterioration status evaluation of the floors and the entire structure

Radiation-Induced Graft Polymerization of Vinyl Monomers with Anion Groups onto MWNT Supports and Their Application as Electrogenerated Chemiluminescence (ECL) Biosensors

Vinyl polymer-grafted multiwalled carbon nanotube (MWNT) supports with anion groups were prepared for use as biosensor supports by radiation-induced graft polymerization (RIGP) of the vinyl monomers acryloyl diphosphoric acid (ADPA), acrylic acid (AA), sodium styrenesulfonate (NaSS), and methacrylic acid (MA) onto the surface of MWNTs. The electrogenerated chemiluminescence sensors based on a glass carbon electrode (ECL-GCE) and a screen printed electrode (ECL-SPE) were fabricated by immobilization of Ru(bpy)3 2+ complex after coating of vinyl polymer-grafted MWNT inks on the surface of the GCE and SPE without any polymer binders in order to obtain high electrogenerated chemiluminescence intensity. For detection of alcohol concentration, alcohol dehydrogenase (ADH) was immobilized onto an ECL-GCE sensor prepared by poly(NaSS)-g-MWNT supports. The prepared biosensor based on ADH is suitable for the detection of ethanol concentration in commercial drinks

Mechanical Stimulation of the HT7 Acupuncture Point to Reduce Ethanol Self-Administration in Rats

Background. Alcoholism, which is a disabling addiction disorder, is a major public health problem worldwide. The present study was designed to determine whether the application of acupuncture at the Shenmen (HT7) point suppresses voluntary alcohol consumption in addicted rats and whether this suppressive effect is potentiated by the administration of naltrexone. Methods. Rats were initially trained to self-administer a sucrose solution by operating a lever. A mechanical acupuncture instrument (MAI) for objective mechanical stimulation was used on rats whose baseline response had been determined. In addition, the effect of HT7 acupuncture on beta-endorphin concentration and ethanol intake via naltrexone were investigated in different groups. Results. We found that ethanol intake and beta-endorphin level in rats being treated with the MAI at the HT7 point reduced significantly. The treatment of naltrexone at high doses reduced the ethanol intake and low-dose injection of naltrexone in conjunction with the MAI also suppressed ethanol intake. Conclusions. The results of the current study indicate that using the MAI at the HT7 point effectively reduces ethanol consumption in rats. Furthermore, the coadministration of the MAI and a low dose of naltrexone can produce some more potent reducing effect of ethanol intake than can acupuncture alone

Ultrasonographic Assessment of the Safe Zone for Carpal Tunnel Intervention: A Comparison Between Healthy Individuals and Patients With Carpal Tunnel Syndrome

Objective To compare transverse and longitudinal safe zones using ultrasonography between healthy individuals and patients with carpal tunnel syndrome (CTS). Methods This was a prospective observational case-control study. Forty wrists from 20 healthy individuals and 40 wrists from 24 patients with CTS were examined. Patients with CTS were classified into three groups (mild, moderate, and severe CTS) based on electrodiagnostic findings. Using ultrasonography, we measured the distance between the median nerve and ulnar vessels to identify the transverse safe zone, and between the distal flexor retinaculum and superficial palmar artery arch to identify the longitudinal safe zone. Results The transverse and longitudinal safe zones were significantly different between participants with CTS and those without CTS. The transverse safe zone significantly differed between the mild and severe CTS groups, while the longitudinal safe zone was not significantly different between the groups. The cross-sectional area of the median nerve negatively correlated with the transverse and longitudinal safe zones. Conclusion Transverse and longitudinal safe zones were narrower in patients with CTS than in the healthy group. A significant difference was observed between patients with mild CTS and those with severe CTS. Furthermore, the cross-sectional area of the median nerve was directly proportional to the degree of narrowing of the transverse and longitudinal safe zones

Novel Technique to Overcome the Nonavailability of a Long Needle 9-0 Polypropylene Suture for Sutured Scleral Fixation of the Posterior Chamber Intraocular Lens Using a Single Fisherman’s Knot

Purpose. To describe a method to overcome the nonavailability of a long needle 9-0 polypropylene suture for sutured scleral fixation of the posterior chamber intraocular lens (PC-IOL) using a single fisherman’s knot (SFK). Methods. First, a 10-0 polypropylene suture was passed from the sclera to the ciliary sulcus using a long needle. A 9-0 suture was tied to the unpassed portion of the 10-0 suture with an SFK. We pulled the 10-0 suture to pass the SFK through the sclera, and then we cut the knot and removed the 10-0 suture. IOL fixation with 9-0 sutures used the conventional techniques used for sutured scleral-fixated IOL. Preoperative and postoperative visual acuity, corneal astigmatism, and endothelial cell count and intraoperative/postoperative complications were evaluated. Results. An SFK joining the two sutures was passed through the sclera without breakage or slippage. A total of 35 eyes from 35 patients who underwent sutured scleral fixation of the IOL. An intraoperative complication (minor intraocular hemorrhage) was recorded in four cases. Knot exposure, IOL dislocation, subluxation, and retinal detachment were not observed. Conclusions. The SFK offers the opportunity to use 9-0 sutures for the long-term safety and may not require the surgeon to learn any new technique