Effect of Ammonia or Nitric Acid Treatment on Surface Structure, in vitro Apatite Formation, and Visible-Light Photocatalytic Activity of Bioactive Titanium Metal

Ti metal treated with NaOH, NH4OH, and heat and then soaked in simulated body fluid (SBF) showed in vitro apatite formation whereas that treated with NaOH, HNO3, and heat and then soaked in SBF did not. The anatase TiO2 precipitate and/or the fine network structure formed on the surface of the Ti metal treated with NaOH, NH4OH, and heat and then soaked in SBF might be responsible for the formation of apatite on the surface of the metal. The NaOH, NH4OH, and heat treatments might produce nitrogen-doped TiO2 on the surface of the Ti metal, and the concentration of methylene blue (MB) in the Ti metal sample treated with NaOH, NH4OH, and heat decreased more than in the untreated and NaOH- and heat-treated ones. This preliminary result suggests that Ti metal treated with NaOH, NH4OH, and heat has the potential to show photocatalytic activity under visible light

Structure of Yttrium and Phosphorus-Containing Microspheres Prepared by Spray Dry Method

Microspheres containing yttrium (Y) and/or phosphorus (P) around 25 µm are useful for radioembolization therapy because they are activated to β-emitter by neutron bombardment and infused in blood vessels in the neighborhood of tumors to irradiateβ-rays to the tumors. In this study, we attempt to prepare Y and P-containing microspheres by spray drying method. Starting solution containing yttrium nitrate and phosphoric acid in equimolar ratio was spray dried under various conditions. Microspheres 5-30 µm in size are obtained when the starting solution with polyvinyl alcohol (PVA) binder was spray-dried at the atomizing pressure of 0.05 MPa. When the microspheres were heated at 1100ºC for 1 h, they precipitated Y-containing crystals such as yttrium phosphate (YPO4), yttrium oxide (Y2O3), yttrium polyphosphate (Y(PO3)3) and yttrium tetraphosphate (Y2P4O13) but most of them were ruptured. Without the PVA binder, small microspheres around 5 µm in size were formed but their shape remained even after the heat treatment. We found that the atomizing pressure of spray dryer remarkably affects the size of microspheres and PVA binder is essential to obtain microspheres around 25 µm, but addition of pH adjuster to starting solution is not essential. This study proposed the criterion of conditions to prepare Y and P-containing microspheres by spray drying method

In vitro apatite formation and visible-light photocatalytic activity of Ti metal subjected to chemical and thermal treatments

In this study, we investigated the surface structure, apatite formation in simulated body fluid (SBF), and visible-light photocatalytic activity of Ti metal subjected to chemical and thermal treatments. Ti metal samples treated with NaOH, a nitrogen-containing solution (0.1 M HNO3, 0.1–1.0 M (H2N)2Cdouble bond; length as m-dashO, or 0.1–1.0 M NH4Cl), and heat showed apatite formation on their surfaces in SBF, whereas those treated with NaOH, 0.5 or 1.0 M HNO3, and heat did not. In the former case, apatite formation may be attributable to the fine network structure of anatase-type TiO2 doped with a small amount of nitrogen on the surface of the Ti metal. The Ti metal treated with the latter treatment showed higher methylene blue decomposition than the untreated sample and the one treated with the former treatment. This preliminary result suggests that Ti metal treated with NaOH, 0.1 M HNO3, and heat can potentially show visible-light-induced antibacterial property as well as bone-bonding ability

Adsorption of Laminin on Hydroxyapatite and Alumina and the MC3T3-E1 Cell Response

Artificial hydroxyapatite (HAp) is osteoconductive, but the mechanism is still unclear. It is likely that some serum proteins are adsorbed onto HAp and influence its osteoconductivity. We investigated the adsorption behavior of laminin (LN), which was isolated from murine Engelbreth–Holm–Swarm sarcoma, onto HAp and compared it with nonosteoconductive alpha-type alumina (α-Al2O3). Cell adhesion, spreading, and proliferation on native and LN-adsorbed discs of HAp or α-Al2O3 were examined using murine MC3T3-E1 osteoblastic cells. A larger amount of LN adsorbed onto HAp than α-Al2O3 despite the electrostatic repulsion between LN and HAp, suggesting the specific adsorption of LN onto HAp. The LN adsorbed onto HAp remarkably enhanced initial attachment and spreading of MC3T3-E1 cells, but subsequent proliferation of MC3T3-E1 cells was influenced by the type of material rather than LN adsorption. These fundamental findings imply that LN adsorbed on HAp could trigger osteoconductivity in vivo, aiding in the development of novel biomaterials that specifically adsorb LN and effectively enhance cell attachment and spreading

Fibronectin Adsorption on Osteoconductive Hydroxyapatite and Non-osteoconductive α-alumina

The osteoconductivity mechanism of hydroxyapatite (HAp) has not been elucidated. It is hypothesized that specific proteins adsorb on HAp, promoting its osteoconductivity. To verify this hypothesis, we compared the adsorption behavior of fibronectin (Fn) on HAp powder and on α-alumina (α-Al2O3) powder, a material with no osteoconductivity. More Fn adsorbed on α-Al2O3 than on HAp, irrespective of the Fn concentration, and there was no significant difference in the secondary structure of Fn adsorbed on HAp and α-Al2O3. Further, it is possible that Fn did not adsorb on HAp and α-Al2O3 through the Arg-Gry-Asp motif of Fn. The amount of Fn adsorbed on HAp oriented to the a(b)-axis with very little decrease in carbonate and the adsorbed Fn had a smaller α-helix structure content. The results suggest that the secondary and/or higher-order structure rather than the amount of adsorbed Fn might affect the osteoconductivity of HAp, which might be electrostatically controlled by the crystal face orientation and/or carbonate content of HAp, although this should be confirmed by a cell culture test in the future

Adsorption characteristics of bovine serum albumin onto alumina with a specific crystalline structure

Bone cement containing alumina particles with a specific crystalline structure exhibits the ability to bond with bone. These particles (AL-P) are mainly composed of delta-type alumina (δ-Al2O3). It is likely that some of the proteins present in the body environment are adsorbed onto the cement and influence the expression of its bioactivity. However, the effect that this adsorption of proteins has on the bone-bonding mechanism of bone cement has not yet been elucidated. In this study, we investigated the characteristics of the adsorption of bovine serum albumin (BSA) onto AL-P and compared them with those of its adsorption onto hydroxyapatite (HA), which also exhibits bone-bonding ability, as well as with those of adsorption onto alpha-type alumina (α-Al2O3), which does not bond with bone. The adsorption characteristics of BSA onto AL-P were very different from those onto α-Al2O3 but quite similar to those onto HA. It is speculated that BSA is adsorbed onto AL-P and HA by interionic interactions, while it is adsorbed onto α-Al2O3 by electrostatic attraction. The results suggest that the specific adsorption of albumin onto implant materials might play a role in the expression of the bone-bonding abilities of the materials

Continuous release of O2−/ONOO− in plasma-exposed HEPES-buffered saline promotes TRP channel-mediated uptake of a large cation

Although the externally controllable extracellular supply of the short-lived reactive oxygen and nitrogen species, such as O2•−, •NO, and ONOO−, could potentially manipulate cellular functions, their simple administration to cells is likely to be ineffective due to their rapid deactivation. In this study, we found a method of a continuous supply of O2•−/ONOO− over a few minutes, which is triggered by irradiation of a nonequilibrium atmospheric pressure plasma to commonly used organic buffers (e.g., 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid, HEPES). In addition, a continuous low-dose O2•−/ONOO− supply was shown to induce a physiologically relevant Ca2+ response and subsequently the uptake of a large cation mediated by transient receptor potential channel family member(s). Our results provide a novel approach to the continuous O2•−/ONOO− supply, requiring controllable and mass-volume treatments

Preparation, structure, and in vitro chemical durability of yttrium phosphate microspheres for intra-arterial radiotherapy

Chemically durable microspheres containing yttrium and/or phosphorus are useful for intra-arterial radiotherapy. In this study, we attempted to prepare yttrium phosphate (YPO4) microspheres with high chemical durability. YPO4 microspheres with smooth surfaces and diameters of around 25 μm were successfully obtained when gelatin droplets containing yttrium and phosphate ions were cooled and solidified in a water-in-oil emulsion and then heat-treated at 1100°C. The chemical durability of the heat-treated microspheres in a simulated body fluid at pH = 6 and 7 was high enough for clinical application of intra-arterial radiotherapy

Sol-gel synthesis of magnetic TiO2 microspheres and characterization of their in vitro heating ability for hyperthermia treatment of cancer

Common cancer treatments are invasive and lack specificity, leading to unwanted side effects. Because hyperthermia can kill cancer cells and damage proteins and structures within cells, it has been considered a novel, minimally invasive cancer treatment. However, many hyperthermia treatments cannot heat deep-seated tumors effectively and locally. Heat-generating magnetic microspheres can help address this challenge. However, current research has not produced microspheres that can be sufficiently heated. We prepared magnetic titania (TiO2) microspheres by introducing magnetite nanoparticles (MNPs) into the sol–gel process during water-in-oil emulsion for in situ hyperthermia treatment of cancers. Two types of MNPs were used in this study: One type was synthesized by a chemical coprecipitation method, and the other type was commercially available MNPs. The obtained microspheres contained up to 46.7 wt% MNPs, and their saturation magnetization and coercive force were 34.2 emu/g and 103 Oe, respectively. The particles’ in vitro heating efficiency in an agar phantom was measured in an alternating magnetic field of 300 Oe and 100 kHz. The temperature increase in the agar phantom within 300 s was 4.5 °C for microspheres with MNPs that were synthesized by chemical coprecipitation and 53 °C for microspheres with commercially available MNPs. The excellent heating efficiency of the microspheres may be attributed to the hysteresis losses of the magnetic particles. These microspheres are believed to be promising thermoseeds for hyperthermic treatment of cancer

Self-activated mesh device using shape memory alloy for periosteal expansion osteogenesis

The present study evaluated the use of this self-activated shape memory alloy (SMA) device, with a focus on its effects in the region under the periosteum. Twelve Japanese white rabbits were used in this study. The device was inserted under the periosteum at the forehead. In the experimental group, the device was pushed, bent, and attached to the bone surface and fixed with a titanium screw. In control group, the device was only inserted under the periosteum. After 14 days, the screw was removed and the mesh was activated in the experimental group. Rabbits were sacrificed 5 and 8 weeks after the operation and newly formed bone was histologically and radiographically evaluated. The quantitative data by the area and the occupation of newly formed bone indicated that the experimental group had a higher volume of new bone than the control group at each consolidation period. Histologically, some newly formed bone was observed and most of the subperiosteal space underneath the device was filled with fibrous tissue, and a thin layer of immature bone was observed in the control group. In the experimental group, multiple dome-shaped bones, outlined by thin and scattered trabeculae, were clearly observed under the SMA mesh device. The use of self-activated devices for the periosteal expansion technique may make it possible to avoid donor site morbidity, trans-skin activation rods, any bone-cutting procedure, and the following intermittent activation procedure