Heat transfer and second law analyses of forced convection in a channel partially filled by porous media and featuring internal heat sources

This paper provides a comprehensive study on the heat transfer and entropy generation rates in a channel partially filled with a porous medium and under constant wall heat flux. The porous inserts are attached to the walls of the channel and the system features internal heat sources due to exothermic or endothermic physical or physicochemical processes. Darcy-Brinkman model is used for modelling the transport of momentum and an analytical study on the basis of LTNE (local thermal non-equilibrium) condition is conducted. Further analysis through considering the simplifying, LTE (local thermal equilibrium) model is also presented. Analytical solutions are, first, developed for the velocity and temperature fields. These are subsequently incorporated into the fundamental equations of entropy generation and both local and total entropy generation rates are investigated for a number of cases. It is argued that, comparing with LTE, the LTNE approach yields more accurate results on the temperature distribution within the system and therefore reveals more realistic Nusselt number and entropy generation rates. In keeping with the previous investigations, bifurcation phenomena are observed in the temperature field and rates of entropy generation. It is, further, demonstrated that partial filling of the channel leads to a substantial reduction of the total entropy generation. The results also show that the exothermicity or endothermicity characteristics of the system have significant impacts on the temperature fields, Nusselt number and entropy generation rates

Generation of entropy and forced convection of heat in a conduit partially filled with porous media- Local thermal non-equilibrium and exothermicity effects applied thermal engineering

The performance of a two-dimensional, axisymmetric channel with porous inserts attached to the walls is analyzed from the perspective of the first and second laws of thermodynamics. In this analysis, the flow is assumed to be fully developed with a constant heat flux imposed on the external surfaces of the walls, while heat could be internally generated by the fluid and solid phases. Using a Darcy-Brinkman model of momentum transport along with a two-equation thermal energy model, a convective model was developed to describe the thermal boundary conditions on the porous-fluid interface. The so-called Model A was employed on the walls of the channel and semi-analytical solutions were developed for the hydrodynamic, temperature, entropy generation fields and the Nusselt number, and an extensive parametric study was subsequently, conducted. The results indicated that the inclusion of exothermicity leads to significant modifications in the thermal and entropic behaviour of the system. In particular, through comparison with the recent literature, it was demonstrated that exothermicity can significantly impact the influence of the porous-fluid interface model upon the generation of both the local and total entropy within the system

Synthesis of NiO nanowalls by thermal treatment of Ni film deposited onto a stainless steel substrate

Two-dimensional nanostructures have a variety of applications due to their large surface areas. In this study, the authors present a simple and convenient method to realize two-dimensional NiO nanowalls by thermal treatment of a Ni thin film deposited by sputtering onto a stainless steel substrate. The substrate surface area is supposed to be significantly increased by creating nanowalls. The effects on the nanowall morphology of the thermal treatment temperature and duration are investigated. A mechanism based on the surface diffusion of Ni2+ ions from the Ni base film is then proposed for the growth of the NiO nanowalls. The as-synthesized NiO nanowalls are characterized by scanning electron microscopy, energy-dispersive x-ray analysis, x-ray diffraction, transmission electron microscopy and high resolution transmission electron microscopy

Realization of aligned three-dimensional single-crystal chromium nanostructures by thermal evaporation

Aligned three-dimensional single-crystal chromium nanostructures are fabricated onto a silicon substrate by thermal evaporation in a conventional thermal evaporator, where the incident angle of Cr vapor flux with respect to the substrate surface normal is fixed at 88°. The effects of the deposition time and incident angle on the morphology of the resulting nanostructures are investigated. The achieved Cr nanostructures are characterized by scanning electron microscopy, energy dispersive X-ray analysis, X-ray diffraction, transmission electron microscopy, high-resolution transmission electron microscopy, and surface area measurement. This study provides a convenient way to fabricate three-dimensional single-crystal Cr nanostructures, which is suitable for batch fabrication and mass production. Finally, the same technique is employed to fabricate the nanostructures of other metals such as Ag, Au, Pd, and Ni

Nanoenergetic Materials for MEMS: A Review

New energetic materials (EMs) are the key to great advances in microscale energy-demanding systems as actuation part, igniter, propulsion unit, and power. Nanoscale EMs (nEMs)particularly offer the promise of much higher energy densities, faster rate of energy release, greater stability, and more security sensitivity to unwanted initiation). nEMs could therefore give response to microenergetics challenges. This paper provides a comprehensive review of current research activities in nEMs for microenergetics application. While thermodynamic calculations of flame temperature and reaction enthalpies are tools to choose desirable EMs, they are not sufficient for the choice of good material for microscale application where thermal losses are very penalizing. A strategy to select nEM is therefore proposed based on an analysis of the material diffusivity and heat of reaction. Finally, after a description of the different nEMs synthesis approaches, some guidelines for future investigations are provided

Synthesis of large-area and aligned copper oxide nanowires from copper thin film on silicon substrate

Large-area and aligned copper oxide nanowires have been synthesized by thermal annealing of copper thin films deposited onto silicon substrate. The effects of the film deposition method, annealing temperature, film thickness, annealing gas, and patterning by photolithography are systematically investigated. Long and aligned nanowires can only be formed within a narrow temperature range from 400 to 500°C. Electroplated copper film is favourable for the nanowire growth, compared to that deposited by thermal evaporation. Annealing copper thin film in static air produces large-area, uniform, but not well vertically aligned nanowires along the thin film surface. Annealing copper thin film under a N2/O2 gas flow generates vertically aligned, but not very uniform nanowires on large areas. Patterning copper thin film by photolithography helps to synthesize large-area, uniform, and vertically aligned nanowires along the film surface. The copper thin film is converted into bicrystal CuO nanowires, Cu2O film, and also perhaps some CuO film after the thermal treatment in static air. Only CuO in the form of bicrystal nanowires and thin film is observed after the copper thin film is annealed under a N2/O2 gas flow

Development of a nano-Al/CuO based energetic material on silicon substrate

Nanoenergetic materials nEMs have improved performances compared to their bulk counterpart or microcounterpart. The authors propose an approach to synthesize an Al/CuO based nEM that has several advantages over previous investigations such as enhanced contact, reduced impurities and Al oxidation, tailored dimensions, and easier integration into microsystem. CuO nanowires are synthesized by thermally annealing Cu film deposited onto silicon. Nano-Al is integrated with the nanowires to realize an Al/CuO based nEM. The synthesized nEM is characterized by scanning electron microscopy, high resolution transmission electron microscopy, x-ray diffraction, differential thermal analysis, and differential scanning calorimetry

Graph Regularized Non-negative Matrix Factorization By Maximizing Correntropy

Non-negative matrix factorization (NMF) has proved effective in many clustering and classification tasks. The classic ways to measure the errors between the original and the reconstructed matrix are $l_2$ distance or Kullback-Leibler (KL) divergence. However, nonlinear cases are not properly handled when we use these error measures. As a consequence, alternative measures based on nonlinear kernels, such as correntropy, are proposed. However, the current correntropy-based NMF only targets on the low-level features without considering the intrinsic geometrical distribution of data. In this paper, we propose a new NMF algorithm that preserves local invariance by adding graph regularization into the process of max-correntropy-based matrix factorization. Meanwhile, each feature can learn corresponding kernel from the data. The experiment results of Caltech101 and Caltech256 show the benefits of such combination against other NMF algorithms for the unsupervised image clustering

Development of solid propellant microthrusters

Ph.DDOCTOR OF PHILOSOPH