Experimental Study of Cohesive Embankment Dam Breach Formation due to Overtopping

The recurrent floods in recent decades have imposed a challenge of embankment dam breaching, which needs great attention through improved design methods that are based on risk approach, the evacuation plans for people at risk, etc. In this study, based on the small-scale model tests a series of experiments were conducted to determine the breaching process of cohesive embankment dam using a simplified physical based breach model due to overtopping; the breach process observed during tests in the laboratory and the results from analyzed parameters are described. Five dam models, three of which were constructed with homogenous clay soil while two were sandy-clay mixture tested. The heights of the embankments dam were 0.45 m, and the widths at the crest were 0.20 m. The data from these examinations indicated that headcut erosion played an important role in the process of breach development. Initiation of erosion, flow shear erosion, sidewall bottom erosion, and distinct soil mechanical slope mass failure from the headcut vertically and laterally were all observed during these tests. In this physical based experimental model, the initial scouring position calculated by applying a hydraulic method, the broad crested weir formula used for breaching flow discharge and flow velocity computed based on breach flow discharge. The stability of the side slope failures was estimated by comparing the resisting and deriving force. Further, using data from laboratory experiments, the calculated peak breach discharge, breach characteristics times, breach widths, and breach flow velocity generally agreed well with the measured data and also the knowledge acquired from observed breach process at several stages. Finally, the accuracy of model was checked by root-mean-square-error

Effects of fragrance compounds on growth of the silkworm Bombyx mori

Due to the contamination and biological toxicity of some fragrance compounds, the environmental and ecological problems of such compounds have attracted more and more attention. However, studies of the toxicity of fragrance compounds for insects have been limited. The toxicity of 48 fragrance compounds for the silkworm Bombyx mori were investigated in this study. All of the fragrance compounds examined had no acute toxicity for B. mori larvae, but eight of them (menthol, maltol, musk xylene, musk tibeten, dibutyl sulfide, nerolidol, ethyl vanillin, and α-amylcinnamaldehyde) exhibited chronic and lethal toxicity with LC50 values from 20 to 120 µM. In a long-term feeding study, musk tibeten, nerolidol, and musk xylene showed significant growth regulatory activity. They were also extremely harmful to the cocooning of B. mori, resulting in small, thin, and loose cocoons. Two important insect hormones, namely, juvenile hormone (JH) and 20-hydroxyecdysone (20-E), were quantified in hemolymph following chronic exposure to musk tibeten, nerolidol, and musk xylene, respectively. Musk tibeten significantly increased JH titer and decreased the 20-E titer in hemolymph, and musk xylene had a significant inhibitory effect on JH titer and increased 20-E titer. Although nerolidol had no effect on hormone levels, exogenous JH mimic nerolidol increased the physiological effects of JH and significantly slowed the growth rate of B. mori larvae. The results showed that these fragrance compounds could interfere with the insect endocrine system, leading to death and abnormal growth. The risk to insects of residual fragrance compounds in the environment is worthy of attention

Trigger efficiencies at BES III

Trigger efficiencies at BES III were determined for both the J/psi and psi' data taking of 2009. Both dedicated runs and physics datasets are used; efficiencies are presented for Bhabha-scattering events, generic hadronic decay events involving charged tracks, dimuon events and psi' -> pi+pi-J/psi, J/psi -> l+l- events (l an electron or muon). The efficiencies are found to lie well above 99% for all relevant physics cases, thus fulfilling the BES III design specifications.Comment: 6 pages, 4 figure

Revealing of the Activation Pathway and Cathode Electrolyte Interphase Evolution of Li-Rich 0.5Li2MnO3·0.5LiNi0.3Co0.3Mn0.4O2 Cathode by in Situ Electrochemical Quartz Crystal Microbalance.

The first-cycle behavior of layered Li-rich oxides, including Li2MnO3 activation and cathode electrolyte interphase (CEI) formation, significantly influences their electrochemical performance. However, the Li2MnO3 activation pathway and the CEI formation process are still controversial. Here, the first-cycle properties of xLi2MnO3·(1- x) LiNi0.3Co0.3Mn0.4O2 ( x = 0, 0.5, 1) cathode materials were studied with an in situ electrochemical quartz crystal microbalance (EQCM). The results demonstrate that a synergistic effect between the layered Li2MnO3 and LiNi0.3Co0.3Mn0.4O2 structures can significantly affect the activation pathway of Li1.2Ni0.12Co0.12Mn0.56O2, leading to an extra-high capacity. It is demonstrated that Li2MnO3 activation in Li-rich materials is dominated by electrochemical decomposition (oxygen redox), which is different from the activation process of pure Li2MnO3 governed by chemical decomposition (Li2O evolution). CEI evolution is closely related to Li+ extraction/insertion. The valence state variation of the metal ions (Ni, Co, Mn) in Li-rich materials can promote CEI formation. This study is of significance for understanding and designing Li-rich cathode-based batteries

Soft-sediment deformation structures related to volcanic earthquakes of the Lower Cretaceous Qingshan Group in Lingshan Island, Shandong Province, East China

Abstract The study on soft-sediment deformation structures (SSDS) of Lingshan Island has been one of the hot topics of sedimentology researches in China in recent years, and SSDS developed in turbidite system in the Laiyang Group are widely known by domestic researchers. However, few studies were conducted on the SSDS in fan delta system in the Qingshan Group, Lingshan Island. This study analyzes the classification and characteristics of SSDS especially their lithofacies association and lithologic characteristics through field outcrops investigation and thin section analysis as well. A conclusion was acquired that the paleoenvironment was a fan delta system with occurrence of several volcanic eruptions, where the water became gradually shallower. The SSDS types in the Qingshan Group includes load and flame structure, ball and pillow structure, water-escape structure, hydroplastic deformation structure, plastic sandstone breccia structure, volcanic drop stone and V-shaped ground fissure mainly caused by volcanic earthquakes of three types: (1) seismic waves, (2) gravity and inertia effect of pyroclastic flows, (3) instant differential air pressure; which is different from slumping and tectonic earthquakes occurred in the Laiyang Group. In addition, with the lithofacies association analysis between pyroclastic flow and SSDS beds, a distribution model of SSDS related to volcanic earthquakes can be established: SSDS types changed gradually with their distance further away from the volcanic activity core. Brittle deformation which was common in the proximal zone disappeared gradually; liquefied and plastic SSDS continued to dominate in the medial zone; and slightly liquefied SSDS were developed in the distal zone. Meanwhile, the scale and size of SSDS is negatively correlated with the distance of SSDS depositional locations from the volcanic vent