Penetration Depth of a Soil Moisture Profile Probe Working in Time-Domain Transmission Mode

Soil moisture is one of the most important soil parameters. Knowledge of volumetric water content (VWC) of the root zone as well as the VWC dynamics in the soil profile is especially important for agriculture. Monitoring VWC at several depths in the soil profile can be performed using several soil moisture sensors placed at various depths. However, the use of a profile probe is more convenient, because the installation of a single probe is less disturbing to the soil, as well as less laborious and more cost-effective. The objective of the paper is to present the design and performance of a novel profile probe working in the time-domain transmission mode (P-TDT probe) with emphasis put on the penetration depth and sensitivity zone. The performance of the probe was assessed with the use of finite element method (FEM) simulations in the frequency domain, transient simulations in the time domain and laboratory experiments with the use of a vector network analyzer (VNA) working in the 10 MHz–10 GHz frequency range. It was concluded that the effective soil volume measured by the profile probe of a given geometry is equivalent to a soil thickness of about 20 mm around the tested probe. The internal part of the probe body had a negligible effect on the measurement results, as it does not change with soil moisture. Moreover, the transmitted signal amplitude was related to the soil electrical conductivity

The 42nd Symposium Chromatographic Methods of Investigating Organic Compounds : Book of abstracts

The 42nd Symposium Chromatographic Methods of Investigating Organic Compounds : Book of abstracts. June 4-7, 2019, Szczyrk, Polan

Evaluation of Apple Maturity with Two Types of Dielectric Probes

The observed dielectric spectrum of ripe apples in the last period of shelf-life was analyzed using a multipole dielectric relaxation model, which assumes three active relaxation processes: primary α-process (water relaxation) and two secondary processes caused by solid-water-ion interactions α’ (bound water relaxations), as well as β’ (Maxwell-Wagner effect). The performance of two designs of the dielectric probe was compared: a classical coaxial open-ended probe (OE probe) and an open-ended probe with a prolonged central conductor in a form of an antenna (OE-A-probe). The OE-A probe increases the measurement volume and consequently extends the range of applications to other materials, like granulated agricultural products, soils, or liquid suspensions. However, its measurement frequency range is limited as compared to the OE probe because, above 1.5 GHz, the probe with the antenna generates higher propagation modes and the applied calibrations and calculations are not sufficient. It was shown that data from measurements using the OE-A probe gave slightly stronger correlations with apples’ quality parameters than using the typical OE probe. Additionally, we have compared twelve multipole fitting models with different combinations of poles (eight three-pole and four two-pole models). It was shown that the best fit is obtained using a two-pole model for data collected for the OE-A probe and a three-pole model for the OE probe, using only Cole-Cole poles in both cases

Penetration Depth of a Soil Moisture Profile Probe Working in Time-Domain Transmission Mode

Soil moisture is one of the most important soil parameters. Knowledge of volumetric water content (VWC) of the root zone as well as the VWC dynamics in the soil profile is especially important for agriculture. Monitoring VWC at several depths in the soil profile can be performed using several soil moisture sensors placed at various depths. However, the use of a profile probe is more convenient, because the installation of a single probe is less disturbing to the soil, as well as less laborious and more cost-effective. The objective of the paper is to present the design and performance of a novel profile probe working in the time-domain transmission mode (P-TDT probe) with emphasis put on the penetration depth and sensitivity zone. The performance of the probe was assessed with the use of finite element method (FEM) simulations in the frequency domain, transient simulations in the time domain and laboratory experiments with the use of a vector network analyzer (VNA) working in the 10 MHz–10 GHz frequency range. It was concluded that the effective soil volume measured by the profile probe of a given geometry is equivalent to a soil thickness of about 20 mm around the tested probe. The internal part of the probe body had a negligible effect on the measurement results, as it does not change with soil moisture. Moreover, the transmitted signal amplitude was related to the soil electrical conductivity

Complex Dielectric Permittivity Spectra of Rapeseed in the 20 MHz–3 GHz Frequency Range

Rapeseed is one of the most important sources of vegetable oil worldwide. Knowledge of the dielectric properties of rapeseed may be beneficial for moisture content determination and the optimization of microwave treatment processes. The aim of this research was to examine the complex dielectric permittivity spectra of rapeseed of moisture content from 8.3% to 16.1%. The measurements were performed in the 20 MHz–3 GHz frequency range with the use of a vector network analyzer and a coaxial transmission-line cell. The real part of dielectric permittivity significantly depended on the water content of the seeds. The obtained spectra were modeled with the use of a three-pole Debye model with bulk electrical conductivity. Because the highest-frequency pole was found near the high-frequency measurement band limit, the spectra were additionally modeled with the use of an approximate ABC model with two in-band Debye poles. The determined model parameters were found to be highly dependent on the water content of the seeds. The relations between these parameters and water content were analyzed

A Time-Domain Reflectometry Method with Variable Needle Pulse Width for Measuring the Dielectric Properties of Materials

Time-domain reflectometry (TDR) methods used for measuring the dielectric properties of materials mostly utilize step or needle electrical pulses of constant amplitudes and shapes. Our novel approach enables determining the dielectric relaxation time of a sample using the analysis of the amplitudes of reflected pulses of two widths, in addition to bulk dielectric permittivity and electrical conductivity commonly obtained by the TDR technique. The method was developed for various values of electrical conductivity and relaxation time using numerical simulations of a five-rod probe placed in a material with complex dielectric permittivity described by the Debye model with an added electrical conductivity term. The characterization of amplitudes of two pulses of selected widths was done with regard to the dielectric parameters of simulated materials. The required probe parameters were obtained solely from numerical simulations. Verification was performed for the probe placed in aqueous KCl solutions with 14 different electrical conductivity values. The determined relaxation time remained roughly constant and independent of electrical conductivity. The obtained electrical conductivity agreed with the reference values. Our results indicate that the relaxation time, dielectric permittivity and electrical conductivity of the tested solutions can be simultaneously determined using a simple analysis of the amplitude and reflection time of two needle pulses of different widths