Compact, Low-Profile, Bandwidth-Enhanced Substrate Integrated Waveguide Filtenna

© 2011 IEEE. In this letter, a compact, low-profile, bandwidth-enhanced, dual-cavity substrate integrated waveguide (SIW) filtenna is demonstrated. Two SIW cavities are stacked vertically on top of each other. A complementary split-ring resonator slot is etched in the top surface of the uppermost cavity, causing the top surface to act as a patch antenna. The operational impedance bandwidth is significantly enhanced by merging the three resonances that arise from this configuration. One is introduced by the patch, and the other two are inherently generated by the two cavities. A metallized coupling post is introduced from the ground plane through both cavities to the upper surface to excite the fundamental resonant mode of the patch, as well as to electromagnetically couple the two cavities. The optimized filtenna was fabricated by a standard printed circuit board technology and tested. It has a low profile λ 0 and a compact size 0.62λ 0×0.62λ0 at its center frequency, f0=2.95GHz. The measured results agree well with their simulated values. They demonstrate a 6.3% fractional bandwidth, a maximum realized gain of 6.73 dBi, a flat gain profile within its passband, and an excellent out-of-band selectivity

Compact, Low-Profile, Linearly and Circularly Polarized Filtennas Enabled with Custom-Designed Feed-Probe Structures

© 1963-2012 IEEE. Compact, low-profile, linearly polarized (LP), and circularly polarized (CP) patch-based filtennas are realized with a custom-designed coupling probe. It introduces a deep null at both the lower and upper band edges of the filter response. These two nulls facilitate a quasi-elliptic bandpass behavior and can be independently controlled to achieve sharp band-edge skirts and high out-of-band suppression levels. The CP version evolves from the LP design by introducing a T-shaped near-field resonant parasitic (NFRP) element near the probe to create two transmission paths with an inherent 90° phase difference. Its presence facilitates the simultaneous excitation of the TM10 and TM01 modes of the patch without the need for any power divider or phase delay line, reducing the design complexity and lowering the insertion loss. Prototypes were fabricated, assembled, and tested. The measured results agree well with their simulated values. They are low profile (0.03 \lambda _{0} height) and compact in size ( 0.04~\lambda _{0}^{2} footprint). The LP and CP prototypes exhibit, respectively, a -10-dB fractional impedance bandwidth of 7% and an overlapping axial ratio fractional bandwidth of 4.5%. Excellent measured performance characteristics are demonstrated, including flat passband realized gain values and filter responses with sharp roll-off rates and high out-of-band suppression levels

Non-immunoglobulin scaffold proteins: Precision tools for studying protein-protein interactions in cancer

Cancer is frequently characterised by dysregulation of the cellular signalling processes that govern proliferation, survival and attachment. Understanding such dysregulation continues to present a challenge given the importance of protein-protein interactions in intracellular processes. Exploring this protein-protein interactome requires novel tools capable of discriminating between highly homologous proteins, individual domains and post-translational modifications. This review examines the potential of scaffold-based binding proteins to fulfil these requirements. It also explores protein-protein interactions in the context of intracellular signalling pathways and cancer, and demonstrates the uses of scaffold proteins as functional moderators, biosensors and imaging reagents. This review also highlights the timeliness and potential to develop international consortia to develop and validate highly specific “proteome” scaffold-based binding protein reagents with the ultimate aim of developing screening tools for studying the interactome

Synthesis and Photoluminescence Property of Silicon Carbide Nanowires Via Carbothermic Reduction of Silica

Silicon carbide nanowires have been synthesized at 1400 °C by carbothermic reduction of silica with bamboo carbon under normal atmosphere pressure without metallic catalyst. X-ray diffraction, scanning electron microscopy, energy-dispersive spectroscopy, transmission electron microscopy and Fourier transformed infrared spectroscopy were used to characterize the silicon carbide nanowires. The results show that the silicon carbide nanowires have a core–shell structure and grow along <111> direction. The diameter of silicon carbide nanowires is about 50–200 nm and the length from tens to hundreds of micrometers. The vapor–solid mechanism is proposed to elucidate the growth process. The photoluminescence of the synthesized silicon carbide nanowires shows significant blueshifts, which is resulted from the existence of oxygen defects in amorphous layer and the special rough core–shell interface

Identification and Characterization of Two Functionally Unknown Genes Involved in Butanol Tolerance of Clostridium acetobutylicum

Solvents toxicity is a major limiting factor hampering the cost-effective biotechnological production of chemicals. In Clostridium acetobutylicum, a functionally unknown protein (encoded by SMB_G1518) with a hypothetical alcohol interacting domain was identified. Disruption of SMB_G1518 and/or its downstream gene SMB_G1519 resulted in increased butanol tolerance, while overexpression of SMB_G1518-1519 decreased butanol tolerance. In addition, SMB_G1518-1519 also influences the production of pyruvate:ferredoxin oxidoreductase (PFOR) and flagellar protein hag, the maintenance of cell motility. We conclude that the system of SMB_G1518-1519 protein plays a role in the butanol sensitivity/tolerance phenotype of C. acetobutylicum, and can be considered as potential targets for engineering alcohol tolerance

Transcriptome Analysis of the Hippocampal CA1 Pyramidal Cell Region after Kainic Acid-Induced Status Epilepticus in Juvenile Rats

Molecular mechanisms involved in epileptogenesis in the developing brain remain poorly understood. The gene array approach could reveal some of the factors involved by allowing the identification of a broad scale of genes altered by seizures. In this study we used microarray analysis to reveal the gene expression profile of the laser microdissected hippocampal CA1 subregion one week after kainic acid (KA)-induced status epilepticus (SE) in 21-day-old rats, which are developmentally roughly comparable to juvenile children. The gene expression analysis with the Chipster software generated a total of 1592 differently expressed genes in the CA1 subregion of KA-treated rats compared to control rats. The KEGG database revealed that the identified genes were involved in pathways such as oxidative phosporylation (26 genes changed), and long-term potentiation (LTP; 18 genes changed). Also genes involved in Ca2+ homeostasis, gliosis, inflammation, and GABAergic transmission were altered. To validate the microarray results we further examined the protein expression for a subset of selected genes, glial fibrillary protein (GFAP), apolipoprotein E (apo E), cannabinoid type 1 receptor (CB1), Purkinje cell protein 4 (PEP-19), and interleukin 8 receptor (CXCR1), with immunohistochemistry, which confirmed the transcriptome results. Our results showed that SE resulted in no obvious CA1 neuronal loss, and alterations in the expression pattern of several genes during the early epileptogenic phase were comparable to previous gene expression studies of the adult hippocampus of both experimental epileptic animals and patients with temporal lobe epilepsy (TLE). However, some changes seem to occur after SE specifically in the juvenile rat hippocampus. Insight of the SE-induced alterations in gene expression and their related pathways could give us hints for the development of new target-specific antiepileptic drugs that interfere with the progression of the disease in the juvenile age group

Myocardial tagging by Cardiovascular Magnetic Resonance: evolution of techniques--pulse sequences, analysis algorithms, and applications

Cardiovascular magnetic resonance (CMR) tagging has been established as an essential technique for measuring regional myocardial function. It allows quantification of local intramyocardial motion measures, e.g. strain and strain rate. The invention of CMR tagging came in the late eighties, where the technique allowed for the first time for visualizing transmural myocardial movement without having to implant physical markers. This new idea opened the door for a series of developments and improvements that continue up to the present time. Different tagging techniques are currently available that are more extensive, improved, and sophisticated than they were twenty years ago. Each of these techniques has different versions for improved resolution, signal-to-noise ratio (SNR), scan time, anatomical coverage, three-dimensional capability, and image quality. The tagging techniques covered in this article can be broadly divided into two main categories: 1) Basic techniques, which include magnetization saturation, spatial modulation of magnetization (SPAMM), delay alternating with nutations for tailored excitation (DANTE), and complementary SPAMM (CSPAMM); and 2) Advanced techniques, which include harmonic phase (HARP), displacement encoding with stimulated echoes (DENSE), and strain encoding (SENC). Although most of these techniques were developed by separate groups and evolved from different backgrounds, they are in fact closely related to each other, and they can be interpreted from more than one perspective. Some of these techniques even followed parallel paths of developments, as illustrated in the article. As each technique has its own advantages, some efforts have been made to combine different techniques together for improved image quality or composite information acquisition. In this review, different developments in pulse sequences and related image processing techniques are described along with the necessities that led to their invention, which makes this article easy to read and the covered techniques easy to follow. Major studies that applied CMR tagging for studying myocardial mechanics are also summarized. Finally, the current article includes a plethora of ideas and techniques with over 300 references that motivate the reader to think about the future of CMR tagging