Conceptual study of Dooshivisha (Cumulative toxicity) w.r.t. Ancient classics and Modern science

Ayurveda describes the vast turnover of beauty aid products. More and more new synthetic substances are introduced every day. Many of these are not adequately tested for safety, in particular for routes other than oral or parenteral. Increased incidence of skin conditions like eczema and contact dermatitis after using newer cosmetics suggest that this may be due to local toxic effects or toxic effects manifested on this phenomenon as Dooshivisha. They are relevant to the current way of life considering the prevalence of pollution, occupational hazards and extent of exposure to toxins in food and other articles used in daily life. Present generation is much more likely to consume junk foods-cold drinks, to have unhealthy travelling habits, working late nights, working with computers in A.C rooms. This is referred to by terms like Hetusatatya, Vegavarodha, Diwaswapa, Viparit Chesta, Virudhannasevana which in turn hamper the normal physiology of human body. Same thing is mentioned in Ayurvedic texts also under the topic of Pradnyaparadh which is the basic cause for all diseases. This Pradnyaparadha is responsible to disturb the daily routine life and person has to face with the complaints of ill-health

Inhibition of CLIC4 Enhances Autophagy and Triggers Mitochondrial and ER Stress-Induced Apoptosis in Human Glioma U251 Cells under Starvation

CLIC4/mtCLIC, a chloride intracellular channel protein, localizes to mitochondria, endoplasmic reticulum (ER), nucleus and cytoplasm, and participates in the apoptotic response to stress. Apoptosis and autophagy, the main types of the programmed cell death, seem interconnected under certain stress conditions. However, the role of CLIC4 in autophagy regulation has yet to be determined. In this study, we demonstrate upregulation and nuclear translocation of the CLIC4 protein following starvation in U251 cells. CLIC4 siRNA transfection enhanced autophagy with increased LC3-II protein and puncta accumulation in U251 cells under starvation conditions. In that condition, the interaction of the 14-3-3 epsilon isoform with CLIC4 was abolished and resulted in Beclin 1 overactivation, which further activated autophagy. Moreover, inhibiting the expression of CLIC4 triggered both mitochondrial apoptosis involved in Bax/Bcl-2 and cytochrome c release under starvation and endoplasmic reticulum stress-induced apoptosis with CHOP and caspase-4 upregulation. These results demonstrate that CLIC4 nuclear translocation is an integral part of the cellular response to starvation. Inhibiting the expression of CLIC4 enhances autophagy and contributes to mitochondrial and ER stress-induced apoptosis under starvation

Exploratory study of plasma total homocysteine and its relationship to short-term outcome in acute ischaemic stroke in Nigerians

<p>Abstract</p> <p>Background</p> <p>Hyperhomocysteinemia is a potentially modifiable risk factor for stroke, and may have a negative impact on the course of ischaemic stroke. The role of hyperhomocysteinemia as it relates to stroke in Africans is still uncertain. The objective of this study was to determine the prevalence and short-term impact of hyperhomocysteinemia in Nigerians with acute ischaemic stroke. We hypothesized that Hcy levels are significantly higher than in normal controls, worsen stroke severity, and increase short-term case fatality rates following acute ischaemic stroke.</p> <p>Methods</p> <p>The study employed both a case-control and prospective follow-up design to study hospitalized adults with first – ever acute ischaemic stroke presenting within 48 hours of onset. Clinical histories, neurological evaluation (including National Institutes of Health Stroke Scale (NIHSS) scores on admission) were documented. Total plasma Hcy was determined on fasting samples drawn from controls and stroke cases (within 24 hours of hospitalization). Outcome at 4 weeks was assessed in stroke patients using the Glasgow Outcome Scale (GOS).</p> <p>Results</p> <p>We evaluated 155 persons (69 acute ischaemic stroke and 86 healthy controls). The mean age ± SD of the cases was 58.8 ± 9.8 years, comparable to that of controls which was 58.3 ± 9.9 years (T = 0.32; P = 0.75). The mean duration of stroke (SD) prior to hospitalization was 43.5 ± 38.8 hours, and mean admission NIHSS score was 10.1 ± 7.7. Total fasting Hcy in stroke patients was 10.2 ± 4.6 umol/L and did not differ significantly from controls (10.1 ± 3.6 umol/L; P = 0.88). Hyperhomocysteinemia, defined by plasma Hcy levels > 90^thpercentile of controls (>14.2 umol/L in women and >14.6 umol/L in men), was present in 7 (10.1%) stroke cases and 11 (12.8%) controls (odds ratio 0.86, 95% confidence interval 0.31 – 2.39; P > 0.05). In multiple regression analysis admission NIHSS score (but not plasma Hcy) was a significant determinant of 4 week outcome measured by GOS score (P < 0.0001).</p> <p>Conclusion</p> <p>This exploratory study found that homocysteine levels are not significantly elevated in Nigerians with acute ischaemic stroke, and admission Hcy level is not a determinant of short-term (4 week) stroke outcome.</p

CFD modeling of rotary cement kilns

Rotary cement kilns are widely used to convert calcineous raw meal into cement clinker, and are key components in the cement industry. In this article, we report a comprehensive computational fluid dynamics (CFD)-based model to capture key transport processes in rotary cement kilns. Separate but coupled computational models were developed for the bed and the freeboard regions of the rotary kiln. The complex swirling airflow produced by kiln burners, coal combustion, gas-phase combustion of volatile matter and radiative heat transfer in the freeboard region were modeled. The clinkerization reactions in the bed region were modeled assuming solids as pseudo fluids. Coating formation in cement kilns (for both bed and freeboard regions) was considered. Appropriate source and sink terms were developed to model transfer of CO(2) from the bed to the freeboard region due to calcination reaction in the bed region. The developed bed and freeboard models were coupled by mass and energy communication through common interface. These coupled computational models were able to quite satisfactorily predict the available data from industrial kilns and previously published results. The computational models were also able to capture the intricacies of the burning zones of rotary cement kilns for changing burner-operational parameters like axial to swirl ratio and oxygen enrichment. The developed approach, computational models and simulation results will not only help in developing better understanding of cement kilns but also provide quantitative information about influence of burner design and other design parameters on kiln performance. (C) 2008

Rotary Cement Kiln Simulator (RoCKS): Integrated modeling of pre-heater, calciner, kiln and clinker cooler

This paper presents an integrated reaction engineering based mathematical model for clinker formation in cement industry. Separate models for pre-heater, calciner, rotary kiln and cooler were initially developed and coupled together to build an integrated simulator. Appropriate models for simulating gas-solid contact and heat transfer in pre-heaters were developed. Calciner was modeled by considering simultaneous combustion of coal particles and calcination of raw meal. Complex heat transfer and reactions (solid-solid, gas-solid and homogeneous reactions in gas phase) in rotary kiln were modeled using three sub-models coupled to each other. Solid-solid reactions in the bed region of the kiln were modeled using pseudo-homogeneous approximation. Melting of solids in the bed and formation of coating within the kiln were accounted. Clinker cooler was simulated by developing a two-dimensional model to capture cross-flow heat transfer between air and hot clinkers. The individual models were coupled with each other via mass and energy communication through common boundaries. The coupled model equations were solved iteratively. The model predictions agree well with the observations and experience from cement industry. The model was used to gain better understanding of influence of operating conditions on energy consumption in cement plant. Several ways for reducing energy consumption were computationally investigated. The integrated model, the developed software RoCKS (for Rotary Cement Kiln Simulator) and results presented here will be useful for enhancing our understanding and for enhancing the performance of clinker manufacturing. (C) 200

Large amplitude oscillatory shear of pseudoplastic and elastoviscoplastic materials

We explore the utility of strain-controlled large amplitude oscillatory shear (LAOS) deformation for identifying and characterizing apparent yield stress responses in elastoviscoplastic materials. Our approach emphasizes the visual representation of the LAOS stress response within the framework of Lissajous curves with strain, strain-rate, and stress as the coordinate axes, in conjunction with quantitative analysis of the corresponding limit cycle behavior. This approach enables us to explore how the material properties characterizing the yielding response depend on both strain amplitude and frequency of deformation. Canonical constitutive models (including the purely viscous Carreau model and the elastic Bingham model) are used to illustrate the characteristic features of pseudoplastic and elastoplastic material responses under large amplitude oscillatory shear. A new parameter, the perfect plastic dissipation ratio, is introduced for uniquely identifying plastic behavior. Experimental results are presented for two complex fluids, a pseudoplastic shear-thinning xanthan gum solution and an elastoviscoplastic invert-emulsion drilling fluid. The LAOS test protocols and the associated material measures provide a rheological fingerprint of the yielding behavior of a complex fluid that can be compactly represented within the domain of a Pipkin diagram defined by the amplitude and timescale of deformation.National Science Foundation (U.S.) (Graduate Research Fellowship)United States. Defense Advanced Research Projects Agency (DARPA) (Chemical Robots program