Certification of Reference Materials of Cotton Seed Powder with Different Mass Fractions of the Cotton Event T304-40 - Certified Reference Materials ERM®-BF429 (ERM®-BF429a, ERM®-BF429b, ERM®-BF429c)

This report describes the processing and certification of three cotton seed powder Certified Reference Materials (CRMs) containing different mass fractions of genetically modified (GM) T304-40 cotton (ERM-BF429a, b, c). The materials were prepared and certified in 2009/2010 by the European Commission, Joint Research Centre, Institute for Reference Materials and Measurements (IRMM, Geel, Belgium), according to the principles of ISO Guide 34.JRC.DG.D.2-Reference material

The certification of different mass fractions of MON-Ø4Ø32-6 in soya bean powder Certified Reference Materials ERM®-BF410ap, ERM®-BF410bp, ERM®-BF410cp, ERM®-BF410dp and ERM®-BF410ep

This report describes the production of a set of Certified Reference Materials (CRMs), ERM BF410ap, bp, cp, dp and ep, which are certified for their GTS 40-3-2 soya bean (unique identifier MON-Ø4Ø32-6) event mass fractions. These materials were produced following ISO Guide 34:2009 and are certified in accordance with ISO Guide 35:2006. The materials are intended for the calibration or quality control of real-time PCR measurements to identify GTS 40-3-2 soya bean and quantify its mass fraction. As with any reference material, they can also be used for establishing control charts or for carrying out validation studies. The CRMs were accepted as European Reference Material (ERM®) after peer evaluation by the partners of the European Reference Materials panel.JRC.F.6-Reference Material

CERTIFICATION REPORT: The certification of different mass fractions of Bt11 in maize powder: Certified Reference Materials: ERM®-BF412ak, ERM®-BF412bk, ERM®-BF412ck, ERM®-BF412dk and ERM®-BF412ek

This report describes the production of a set of Certified Reference Materials (CRMs), ERM-BF412ak, bk, ck, dk and ek, which are certified for their Bt11 maize (unique identifier SYN-BTØ11-1) event mass fractions. These materials were produced following ISO Guide 34:2009 and are certified in accordance with ISO Guide 35:2006. Genetically modified (GM) maize seeds of the Bt11 event and seeds from a non GM maize variety were milled to obtain GM and non-GM seed powders with a similar particle size distribution. Mixtures of non-GM and GM maize seed powder were prepared gravimetrically. The certified values were obtained from the gravimetric preparations, taking into account the water mass fractions of the two powder materials and the genetic purity with respect to the Bt11 maize. The certified values were confirmed by event-specific real-time PCR as an independent verification method (measurements were within the scope of accreditation to ISO/IEC 17025:2005). The uncertainties of the certified values were estimated in accordance with the Guide to the Expression of Uncertainty in Measurement (GUM) and include uncertainties relating to possible inhomogeneity (Section 4), instability (Section 5) and characterisation (Section 6). The materials are intended for the calibration or quality control of real-time PCR measurements to identify Bt11 maize and quantify its mass fraction. As with any reference material, they can also be used for establishing control charts or for carrying out validation studies. The CRMs are available in glass bottles containing at least 1 g of dried maize seed powder, sealed under an atmosphere of argon. The minimum amount of sample to be used for extraction of the DNA is 200 mg.JRC.F.6-Reference Material

CERTIFICATION REPORT The certification of different mass fractions of VCO-Ø1981-5 in maize seed powder Certified Reference Materials ERM®-BF438a, ERM®-BF438b, ERM®-BF438c, ERM®-BF438d and ERM®-BF438e

This report describes the production of a set of Certified Reference Materials (CRMs) ERM BF438a, b, c, d and e, which are certified for their VCO-Ø1981-5 mass fractions. These materials were produced following ISO Guide 34:2009 and are certified in accordance with ISO Guide 35:2006. Genetically modified (GM) seeds of the maize event VCO-Ø1981-5 and seeds from a non-GM maize variety were milled to obtain GM and non-GM seed powders with a similar particle size distribution. Mixtures of non-GM and GM maize powder were prepared gravimetrically. The certified value was obtained from the gravimetric preparations, taking into account the genetic purity with respect to the event VCO-Ø1981-5 of the two powder materials and their water mass fractions. The certified values were confirmed by event-specific real-time PCR as an independent verification method (measurements were within the scope of accreditation to ISO/IEC 17025:2005). The uncertainties of the certified values were estimated in accordance with the Guide to the Expression of Uncertainty in Measurement (GUM) [4] and include uncertainties relating to possible inhomogeneity (Section 4), instability (Section 5) and characterisation (Section 6). The materials are intended for the calibration or quality control of real-time PCR measurements to identify VCO-Ø1981-5 maize and/or quantify its mass fraction. As with any reference material, they can also be used for establishing control charts or for carrying out validation studies. The CRMs are available in glass bottles containing at least 1 g of dried maize seed powder, which were sealed under atmosphere of argon. The minimum amount of sample of the mixtures to be used and recommend for the blank and pure VCO-Ø1981-5 materials is 200 mg. The CRMs were accepted as European Reference Material (ERM®) after peer evaluation by the partners of the European Reference Materials consortium.JRC.D.2-Standards for Innovation and sustainable Developmen

The certification of different mass fractions of the GM event 73496 in rapeseed powder: Certified Reference Materials ERM®-BF434a, ERM®-BF434b, ERM®-BF434c, ERM®-BF434d and ERM®-BF434e

This report describes the production of the set of Certified Reference Materials (CRMs) ERM-BF434a, b, c, d and e. These are matrix materials certified for their 73496 rapeseed mass fractions. The material has been produced following ISO Guide 34:2009. Genetically modified (GM) rapeseeds of the event 73496 and of a non-GM rapeseed variety were ground to obtain GM and non-GM base powders. Gravimetric mixtures of non-GM and GM rapeseed powder were prepared by dry-mixing. The between unit-heterogeneity has been quantified and stability during dispatch and stability during storage have been assessed in accordance with ISO Guide 35:2006. The certified value was obtained from the gravimetric preparations, taking into account the purity of the base materials and their respective water mass fraction. The certified values were confirmed by event-specific real-time PCR as an independent verification method (measurements within the scope of accreditation to ISO/IEC 17025:2005). Uncertainties of the certified values were calculated in compliance with the Guide to the Expression of Uncertainty in Measurement (GUM) and include uncertainties related to possible inhomogeneity (Section 4), instability (Section 5) and characterisation (Section 6). The materials are intended for the calibration or quality control of 73496 rapeseed identification and quantification methods. As any reference material, they can also be used for control charts or validation studies. The CRMs are available in glass vials containing at least 1 g of dried rapeseed powder closed under argon atmosphere. The minimum amount of sample to be used is 200 mg. The CRM has been accepted as European Reference Material (ERM®) after peer evaluation by the partners of the European Reference Materials consortium.JRC.D.2-Standards for Innovation and sustainable Developmen

CERTIFICATION REPORT A set of three plasmid DNA calibration solutions bearing a porcine-specific DNA fragment Certified Reference Materials: ERM®-AD483a, ERM®-AD483b, ERM®-AD483c

This report describes the preparation and characterisation of a set of plasmid solutions, ERM-AD483a, ERM-AD483b and ERM-AD483c. The materials were produced in accordance with ISO Guide 34:2009 [1]. A DNA fragment specific for the identification of a porcine target was cloned into a pUC18 vector to construct the pIRMM-0104 plasmid. The nucleic acid sequence of the entire pIRMM-0104 plasmid was determined by dye terminator cycle sequencing. The plasmid was eluted in TElow buffer, and its concentration was measured by ultraviolet (UV) spectrophotometry. Afterwards, it was gravimetrically diluted to three different concentration levels. The plasmid copy number concentration of the three concentration levels were certified by digital and droplet digital quantitative polymerase chain reaction methods, dPCR and ddPCR respectively. In addition, between-unit homogeneity, as well as short-term and long-term stability was assessed in accordance with ISO Guide 35:2006 [2]. The materials are intended for the determination of a cut-off value to discriminate positive samples (containing the porcine target sequence) from negative samples by quantitative PCR as defined in the Standard Operating Procedure of the EU Reference Laboratory for Animal proteins (EURL-AP) according to Commission Regulation (EU) No 51/2013 [3, 4]. As any certified reference material (CRM), ERM-AD483 can also be used for control charts or validation studies. The CRM is available as a set of three vials, each containing at least 1 mL of plasmid solution. The minimum amount of sample to be used is 4 µL.JRC.D.2-Standards for Innovation and sustainable Developmen

Certification Report - The certification of different mass fractions of DAS-81419-2 in soya seed powder: Certified Reference Materials ERM®-BF437a, ERM®-BF437b, ERM®-BF437c, ERM®-BF437d and ERM®-BF437e

This report describes the production of a set of Certified Reference Materials (CRMs) ERM BF437a, b, c, d and e, which are certified for their DAS-81419-2 mass fractions. This material was produced following ISO Guide 34:2009 and is certified in accordance with ISO Guide 35:2006. Genetically modified (GM) seeds of the soya event DAS-81419-2 and seeds from a non-GM soya variety were milled to obtain GM and non-GM seed powders with a similar particle size distribution. Mixtures of non-GM and GM soya powder were prepared gravimetrically. The certified value was obtained from the gravimetric preparations, taking into account the genetic purity with respect to the event DAS-81419-2 of the two powder materials and their water mass fractions. The certified values were confirmed by event-specific real-time PCR as an independent verification method (measurements were within the scope of accreditation to ISO/IEC 17025:2005). Uncertainties of the certified values were calculated in accordance with the Guide to the Expression of Uncertainty in Measurement (GUM) and include uncertainties relating to possible inhomogeneity (Section 4), instability (Section 5) and characterisation (Section 6). The materials are intended for the calibration or quality control of real-time PCR measurements to identify DAS-81419-2 soya and/or quantify its mass fraction. As with any reference material, they can also be used for establishing control charts or for carrying out validation studies. The CRMs are available in glass vials containing at least 1 g of dried soya seed powder which were sealed under atmosphere of argon. The minimum amount of sample to be used is 200 mg. The CRMs were accepted as European Reference Material (ERM®) after peer evaluation by the partners of the European Reference Materials consortiumJRC.D.2-Standards for Innovation and sustainable Developmen

Certification of a Maize NK603 Reference Material for its DNA Copy Number Ratio - Certified Reference Material ERM®-BF415e

This report describes the certification of the Certified Reference Material (CRM) ERM-BF415e for its DNA copy number ratio. This CRM is composed of genetically modified NK603 maize seed and conventional maize seed powders. The ERM-BF415e is part of a set of maize CRMs containing different mass fractions of genetically modified NK603 maize. The CRM was processed and originally certified for its mass fraction by the European Commission, Directorate General Joint Research Centre, Institute for Reference Materials and Measurements (IRMM), Geel, BE.JRC.DG.D.2-Reference material

Certification of Reference Materials of Cotton Seed Powder with Different Mass Fractions of the Cotton Event GHB119 - Certified Reference Materials ERM®BF428 (ERM®-BF428a, ERM®-BF428b, ERM®-BF428c)

This report describes the processing and certification of three cotton seed powder Certified Reference Materials (CRMs) containing different mass fractions of genetically modified (GM) GHB119 cotton (ERM-BF428a, b, c). The materials were processed and certified in 2008/2009 by the European Commission, Joint Research Centre, Institute for Reference Materials and Measurements (IRMM, Geel, Belgium), according to the principles of ISO Guide 34. The three CRMs have been accepted as European Reference Materials (ERM) after peer evaluation by the partners of the European Materiasl consortium.JRC.D.2-Reference material

Certification of Reference Materials of Potato Powder with Different Mass Fractions of the Event AM04-1020 - Certified Reference Materials ERM®-BF430 (ERM®-BF430a, ERM®-BF430b, ERM®-BF430c,ERM®-BF430d, ERM®-BF430e)

This report describes the processing and certification of five potato powder Certified Reference Materials (CRMs) containing different mass fractions of genetically modified (GM) AM04-1020 potato (ERM-BF430a,b,c,d,e). The materials were processed and certified in 2011 by the European Commission, Joint Research Centre, The Institute for Reference Materials and Measurements (IRMM, Geel, Belgium), according to the principles of ISO Guide 34JRC.DG.D.2-Reference material