2,803 research outputs found
Clyde tributaries : report of urban stream sediment and surface water geochemistry for Glasgow
This report presents the results of an urban drainage geochemical survey carried out jointly by the British Geological Survey (BGS) and Glasgow City Council (GCC) during June 2003. 118 stream sediment and 122 surface water samples were collected at a sample density of 1 per 1 km2 from all tributaries draining into the River Clyde within the GCC administrative area. The study was carried out as part of the BGS systematic Geochemical Surveys of Urban Environments (GSUE) programme.
Stream sediment and surface water samples underwent analysis for approximately 46 chemical elements including contaminants such as As, Al, Cd, Cu, Cr, Ni, Pb, Se, V and Zn according to standard GSUE procedures. In addition, parameters such as ammonium, asbestos and Hg as well as organic contaminants such as total petroleum hydrocarbons (TPH), polycyclic aromatic hydrocarbons (PAH), poly-chlorinated biphenyls (PCB) and organo-tin compounds were assessed.
The aim of the project was to provide an overview of urban drainage geochemistry in Glasgow to link to an on-going sister project, which is investigating the geochemistry of the Clyde estuary. This report presents the initial findings of the Clyde tributaries survey but it is envisaged that the data will be interpreted in more detail as part of a wider Clyde basin study once the Clyde estuary survey is completed
Neutron beam test of CsI crystal for dark matter search
We have studied the response of Tl-doped and Na-doped CsI crystals to nuclear
recoils and 's below 10 keV. The response of CsI crystals to nuclear
recoil was studied with mono-energetic neutrons produced by the
H(p,n)He reaction. This was compared to the response to Compton
electrons scattered by 662 keV -ray. Pulse shape discrimination between
the response to these 's and nuclear recoils was studied, and quality
factors were estimated. The quenching factors for nuclear recoils were derived
for both CsI(Na) and CsI(Tl) crystals.Comment: 21pages, 14figures, submitted to NIM
Posterior midline and ventral parietal activity is associated with retrieval success and encoding failure
Electromagnetic properties of graphene junctions
A resonant chiral tunneling (CT) across a graphene junction (GJ) induced by
an external electromagnetic field (EF) is studied. Modulation of the electron
and hole wavefunction phases by the external EF during the CT
processes strongly impacts the CT directional diagram. Therefore the a.c.
transport characteristics of GJs depend on the EF polarization and frequency
considerably. The GJ shows great promises for various nanoelectronic
applications working in the THz diapason.Comment: 4 pages 3 figure
Generation of entangled coherent states via cross phase modulation in a double electromagnetically induced transparency regime
The generation of an entangled coherent state is one of the most important
ingredients of quantum information processing using coherent states. Recently,
numerous schemes to achieve this task have been proposed. In order to generate
travelling-wave entangled coherent states, cross phase modulation, optimized by
optical Kerr effect enhancement in a dense medium in an electromagnetically
induced transparency (EIT) regime, seems to be very promising. In this
scenario, we propose a fully quantized model of a double-EIT scheme recently
proposed [D. Petrosyan and G. Kurizki, {\sl Phys. Rev. A} {\bf 65}, 33833
(2002)]: the quantization step is performed adopting a fully Hamiltonian
approach. This allows us to write effective equations of motion for two
interacting quantum fields of light that show how the dynamics of one field
depends on the photon-number operator of the other. The preparation of a
Schr\"odinger cat state, which is a superposition of two distinct coherent
states, is briefly exposed. This is based on non-linear interaction via
double-EIT of two light fields (initially prepared in coherent states) and on a
detection step performed using a beam splitter and two photodetectors.
In order to show the entanglement of a generated entangled coherent state, we
suggest to measure the joint quadrature variance of the field. We show that the
entangled coherent states satisfy the sufficient condition for entanglement
based on quadrature variance measurement. We also show how robust our scheme is
against a low detection efficiency of homodyne detectors.Comment: 15 pages, 9 figures; extensively revised version; added Section
The influence of nonlinearities on the symmetric hydrodynamic response of a 10,000 TEU Container ship
The prediction of wave-induced motions and loads is of great importance for the design of marine structures. Linear potential flow hydrodynamic models are already used in different parts of the ship design development and appraisal process. However, the industry demands for design innovation and the possibilities offered by modern technology imply the need to also understand the modelling assumptions and associated influences of nonlinear hydrodynamic actions on ship response. At first instance, this paper presents the taxonomy of different Fluid Structure Interaction (FSI) methods that may be used for the assessment of ship motions and loads. Consequently, it documents in a practical way the effects of weakly nonlinear hydrodynamics on the symmetric wave-induced responses for a 10,000TEU Container ship. It is shown that the weakly nonlinear FSI models may be useful for the prediction of symmetric wave-induced loads and responses of such ship not only in way of amidships but also at the extremities of the hull. It is concluded that validation of hydrodynamic radiation and diffraction forces and their respective influence on ship response should be especially considered for those cases where the variations of the hull wetted surface in time may be noticeable
Survey of Sensor Technology for Aircraft Cabin Environment Sensing
The aircraft cabin environment is unique due to the proximity of the passengers, the need for cabin pressurization, and the low humidity. All of these aspects are complicated by the fact that the aircraft is a semi-enclosed structure. There is an increased desire to monitor the aircraft cabin environment with various sensors for comfort and safety. However, the aircraft cabin environment is composed of a large number of factors. Some of these factors can include air quality, temperature, level of pressurization, and motion of the aircraft. Therefore, many types of sensors must be used to monitor aircraft environments. A variety of technology options are often available for each sensor. Consequently, a fair number of tradeoffs need to be carefully considered when designing a sensor monitoring system for the aircraft cabin environment. For instance, a system designer may need to decide if the increased accuracy of a sensor using a particular technology is worth the increased power consumption over a similar sensor employing a more efficient, less accurate technology. In order to achieve a good solution, a designer needs to understand the tradeoffs and general operation for all of the different sensor technologies that could be used in the design. The purpose of this paper is to provide a survey of the current sensor technology. The primary focus of this paper is on sensors and technologies that cover the most common aspects of aircraft cabin environment monitoring. The first half of this paper details the basic operation of different sensor technologies. The second half covers the individual environmental conditions which need to be sensed. This will include the benefits, limitations, and applications of the different technologies available for each particular type of sensor
Globular cluster systems of early-type galaxies in low-density environments
Deep images of 10 early-type galaxies in low-density environments have been obtained with the Advanced Camera for Surveys (ACS) aboard the Hubble Space Telescope. The global properties of the globular cluster (GC) systems of the galaxies have been derived in order to investigate the role of the environment in galaxy formation and evolution. Using the ACS Virgo Cluster Survey as a high-density counterpart, the similarities and differences between the GC properties in high- and low-density environments are presented. We find a strong correlation of the GC mean colours and the degree of colour bimodality with the host galaxy luminosity in low-density environments, in good agreement with high-density environments. In contrast, the GC mean colours at a given host luminosity are somewhat bluer [Δ(g−z) ∼ 0.05] than those for cluster galaxies, indicating more metal poor (Δ[Fe/H] ∼ 0.10 − 0.15) and/or younger (Δage > 2 Gyr) GC systems than those in dense environments. Furthermore, with decreasing host luminosity, the colour bimodality disappears faster, when compared to galaxies in cluster environments. Our results suggest that: (1) in both high- and low-density environments, the mass of the host galaxy has the dominant effect on GC system properties; (2) the local environment has only a secondary effect on the history of GC system formation; and (3) GC formation must be governed by common physical processes across a range of environments
Giant Shapiro steps for two-dimensional Josephson-junction arrays with time-dependent Ginzburg-Landau dynamics
Two-dimensional Josephson junction arrays at zero temperature are
investigated numerically within the resistively shunted junction (RSJ) model
and the time-dependent Ginzburg-Landau (TDGL) model with global conservation of
current implemented through the fluctuating twist boundary condition (FTBC).
Fractional giant Shapiro steps are found for {\em both} the RSJ and TDGL cases.
This implies that the local current conservation, on which the RSJ model is
based, can be relaxed to the TDGL dynamics with only global current
conservation, without changing the sequence of Shapiro steps. However, when the
maximum widths of the steps are compared for the two models some qualitative
differences are found at higher frequencies. The critical current is also
calculated and comparisons with earlier results are made. It is found that the
FTBC is a more adequate boundary condition than the conventional uniform
current injection method because it minimizes the influence of the boundary.Comment: 6 pages including 4 figures in two columns, final versio
Nonequilibrium coupled Brownian phase oscillators
A model of globally coupled phase oscillators under equilibrium (driven by
Gaussian white noise) and nonequilibrium (driven by symmetric dichotomic
fluctuations) is studied. For the equilibrium system, the mean-field state
equation takes a simple form and the stability of its solution is examined in
the full space of order parameters. For the nonequilbrium system, various
asymptotic regimes are obtained in a closed analytical form. In a general case,
the corresponding master equations are solved numerically. Moreover, the
Monte-Carlo simulations of the coupled set of Langevin equations of motion is
performed. The phase diagram of the nonequilibrium system is presented. For the
long time limit, we have found four regimes. Three of them can be obtained from
the mean-field theory. One of them, the oscillating regime, cannot be predicted
by the mean-field method and has been detected in the Monte-Carlo numerical
experiments.Comment: 9 pages 8 figure
- …