1,303 research outputs found
Effects of unsaturation and curvature on the transverse distribution of intramolecular dynamics of dipyrenyl lipids
The roles of acyl chain unsaturation and curvature in the excimer formation efficiency (EFE) of site-specific conjugated pyrene molecules in lipid membranes have been investigated by steady-state and time-resolved fluorescence spectroscopy. Six 1–2-(pyrenyl-n-acyl)-phosphatidylcholine (dipy(n)PC) probes, with pyrenyl chains of varying methylene units n from 4 to 14 carbons, were incorporated separately into dioleoylphosphatidylcholine (DOPC) or dioleoylphosphatidylethanolamine (DOPE) lipid membranes at 0.1 mol%. Both the excimer-to-monomer fluorescence intensity ratio and association-to-dissociation rate constant ratio of conjugated pyrenes were used to quantify EFE. At all temperatures (T = 0–30 degrees C) and for n = 4 and 6, the EFE for DOPE was always smaller than EFE for DOPC. At T < 10 degrees C (where DOPE and DOPC are in the liquid crystalline L alpha phase) and for n > 8, the EFE for curvature frustrated DOPE was significantly greater than EFE for nonfrustrated DOPC (control), and the difference increased gradually with n. At T> 18 degrees C (where DOPE is in the inverted hexagonal H(II) phase and DOPC is in the L alpha phase) and for n > 8, EFE for the curvature-relaxed DOPE was again smaller than the EFE for DOPC control. The contributions of splay conformation and internal dynamics of pyrenyl chains to EFE were examined separately using a lattice model. Our results suggest that i) the cis double bonds of the host lipid matrix strongly perturb both the conformation and dynamics of conjugated pyrenes at the specific location around n = 8, and ii) the lateral stress at the upper part (n < 8) of the curvature frustrated bilayer membranes (DOPE) may be significantly relaxed once the membrane surface adopts a favorable negative interfacial curvature
Hip Arthroplasty for Treatment of Atypical Femoral Fracture with Pre-existing Hip Osteoarthritis 用全髖關節置換術來治療同時患有髖骨關節炎和非典型股骨骨折的病人:病例報告
AbstractA 72-year-old woman with bilateral hip dysplasia sustained atypical femoral fracture of the left subtrochanteric region. She underwent left total hip replacement with a long extensively porous coated femoral stem. The fracture healed with incorporation of the strut allograft after 8 months. A painful horizontal radiolucent line at the tip of the femoral stem was noted after 4 years, with resolution of symptoms after a period of protected weight bearing. We believe that total hip replacement for subtrochanteric atypical femoral fracture with pre-existing hip dysplasia is a feasible option and avoids a second operation for the treatment of osteoarthritis
Applying Data Classification Techniques for Churn Prediction in Retailing
Acquiring new customers and retaining loyal customers have been two important tasks for retailers. One critical issue to retain loyal customers is to know the customers well so that the retailers can provide the right products, do the right promotions and maintain customers from switching away to competitors, i.e. churn. In this study, we investigated the partial churners’ behaviors by (1) identifying key churn predictors, (2) establishing a churn prediction procedure, and (3) applying classification techniques to detect the possible partial churners. Further, the performance of each classification technique was examined and evaluated. We adapted and modified a two-year period customer and transaction data from a retailer to verify our proposed approach. Discussion and managerial implications are provided at the end
Shredding energy consumption of GFRP composite waste
This work investigated effect of glass fibre fabric structures, feedstock feed rate and screen size on specific shredding energy of glass fibre reinforced plastics (GFRP) waste via a two-level factorial design of experiment study. Four types of fabric structure, i.e. unidirectional (UD), biaxial (BIAX), triaxial (TRIAX) and chopped strand mat (CSM), were impregnated separately with unsaturated polyester resin to manufacture GFRP plates. The shredding energy was measured using a two-wattmeter approach. During shredding, CSM demonstrated a relatively flat power consumption curve compared to other fabric types. It was also noticed that the GFRP plate reinforced with more complex woven structure, i.e. TRIAX, required higher energy for shredding, especially with a combination of high feed rate and small screen size. It was found that mechanical efficiency was only around 8.2-15.7% and 0.8-2.2% for shredding at feed rate of 60 kg/hr and 10 kg/hr respectively. It was also found that adopting a larger screen size and lower feed rate could reduce the specific shredding energy
Very strong intrinsic supercurrent carrying ability and vortex avalanches in (Ba,K)Fe2As2 superconducting single crystals
We report that single crystals of (Ba,K)Fe2As2 with Tc = 32 K have a pinning
potential, U0, as high as 10^4 K, with U0 showing very little field
depend-ence. In addition, the (Ba,K)Fe2As2 single crystals become isotropic at
low temperatures and high magnetic fields, resulting in a very rigid vortex
lattice, even in fields very close to Hc2. The rigid vortices in the two
dimensional (Ba,K)Fe2As2 distinguish this compound from 2D high Tc cuprate
superconductors with 2D vortices, and make it being capable of cearrying very
high critical current.Flux jumping due to high Jc was also observed in large
samples at low temperatures.Comment: 4 pages, 7 figures. submitte
Simulated-tempering approach to spin-glass simulations
After developing an appropriate iteration procedure for the determination of
the parameters, the method of simulated tempering has been successfully applied
to the 2D Ising spin glass. The reduction of the slowing down is comparable to
that of the multicanonical algorithm. Simulated tempering has, however, the
advantages to allow full vectorization of the programs and to provide the
canonical ensemble directly.Comment: 12 pages (LaTeX), 4 postscript figures, uufiles encoded, submitted to
Physical Review
Grooming of Dynamic Traffic in WDM Star and Tree Networks Using Genetic Algorithm
The advances in WDM technology lead to the great interest in traffic grooming
problems. As traffic often changes from time to time, the problem of grooming
dynamic traffic is of great practical value. In this paper, we discuss dynamic
grooming of traffic in star and tree networks. A genetic algorithm (GA) based
approach is proposed to support arbitrary dynamic traffic patterns, which
minimizes the number of ADM's and wavelengths. To evaluate the algorithm,
tighter bounds are derived. Computer simulation results show that our algorithm
is efficient in reducing both the numbers of ADM's and wavelengths in tree and
star networks.Comment: 15 page
The effect of finite-range interactions in classical transport theory
The effect of scattering with non-zero impact parameters between consituents
in relativistic heavy ion collisions is investigated. In solving the
relativistic Boltzmann equation, the characteristic range of the collision
kernel is varied from approximately one fm to zero while leaving the mean-free
path unchanged. Modifying this range is shown to significantly affect spectra
and flow observables. The finite range is shown to provide effective
viscosities, shear, bulk viscosity and heat conductivity, with the viscous
coefficients being proportional to the square of the interaction range
Intelligent tracking control of a DC motor driver using self-organizing TSK type fuzzy neural networks
[[abstract]]In this paper, a self-organizing Takagi–Sugeno–Kang (TSK) type fuzzy neural network (STFNN) is proposed. The self-organizing approach demonstrates the property of automatically generating and pruning the fuzzy rules of STFNN without the preliminary knowledge. The learning algorithms not only extract the fuzzy rule of STFNN but also adjust the parameters of STFNN. Then, an adaptive self-organizing TSK-type fuzzy network controller (ASTFNC) system which is composed of a neural controller and a robust compensator is proposed. The neural controller uses an STFNN to approximate an ideal controller, and the robust compensator is designed to eliminate the approximation error in the Lyapunov stability sense without occurring chattering phenomena. Moreover, a proportional-integral (PI) type parameter tuning mechanism is derived to speed up the convergence rates of the tracking error. Finally, the proposed ASTFNC system is applied to a DC motor driver on a field-programmable gate array chip for low-cost and high-performance industrial applications. The experimental results verify the system stabilization and favorable tracking performance, and no chattering phenomena can be achieved by the proposed ASTFNC scheme.[[notice]]補正完畢[[incitationindex]]SCI[[booktype]]紙本[[booktype]]電子
Partonic effects on the elliptic flow at relativistic heavy ion collisions
The elliptic flow in heavy ion collisions at RHIC is studied in a multiphase
transport model. By converting the strings in the high energy density regions
into partons, we find that the final elliptic flow is sensitive to the parton
scattering cross section. To reproduce the large elliptic flow observed in
Au+Au collisions at GeV requires a parton scattering cross
section of about 6 mb. We also study the dependence of the elliptic flow on the
particle multiplicity, transverse momentum, and particle mass.Comment: 7 pages, 7 figures, revtex, text added to detail the procedure for
conversions between hadrons and parton
- …