Gaussian basis sets for use in correlated molecular calculations. XI. Pseudopotential-based and all-electron relativistic basis sets for alkali metal (K–Fr) and alkaline earth (Ca–Ra) elements

New correlation consistent basis sets based on pseudopotential (PP) Hamiltonians have been developed from double- to quintuple-zeta quality for the late alkali (K–Fr) and alkaline earth (Ca–Ra) metals. These are accompanied by new all-electron basis sets of double- to quadruple-zeta quality that have been contracted for use with both Douglas-Kroll-Hess (DKH) and eXact 2-Component (X2C) scalar relativistic Hamiltonians. Sets for valence correlation (ms), cc-pVnZ-PP and cc-pVnZ-(DK,DK3/X2C), in addition to outer-core correlation [valence + (m−1)sp], cc-p(w)CVnZ-PP and cc-pwCVnZ-(DK,DK3/X2C), are reported. The –PP sets have been developed for use with small-core PPs [I. S. Lim et al., J. Chem. Phys. 122, 104103 (2005) and I. S. Lim et al., J. Chem. Phys. 124, 034107 (2006)], while the all-electron sets utilized second-order DKH Hamiltonians for 4s and 5s elements and third-order DKH for 6s and 7s. The accuracy of the basis sets is assessed through benchmark calculations at the coupled-cluster level of theory for both atomic and molecular properties. Not surprisingly, it is found that outer-core correlation is vital for accurate calculation of the thermodynamic and spectroscopic properties of diatomic molecules containing these elements

Novel MCM Interconnection Analysis Using Capacitive Charge Generation (CCG)

A new SEM technique, Capacitive Charge Generation (CCG), has been developed to rapidly image MCM interconnection continuity. The new technique uses low primary electron beam energies (< 2.0 keV), very high beam currents (>100 nA), and fast electron beam scan rates (>5 frames/second) to probe buried conductors in MCMS. For these conditions, new surface charging effects have been observed that enable examination of conductors under thick insulating layers. CCG has been applied to conductors covered by over 90 {mu}m of polymer dielectric. The physics of CCG signal generation and applications for MCM failure analysis are described

The movement of spray drift near a live shelterbelt

Non-Peer ReviewedThere has been recent interest in the use of shelterbelts to mitigate spray drift and protect downwind areas. Previous research has investigated the interaction of spray drift and shelterbelts using model shelterbelts, wind tunnel experiments, and numerical modeling; however, there is limited knowledge on the movement of spray drift near a live shelterbelt in field conditions. These experiments measured the ground deposition and airborne concentration of drift near a live carragana/chokecherry mix shelterbelt. It was found that when compared to open field experiments where there was no shelterbelt, the mass of ground deposit was less in the lee of the shelterbelt for a distance of 0-10H downwind of the shelterbelt (where H is the height of the shelterbelt). Further than 10H downwind of the shelterbelt, the mass of ground deposit was similar to the open field. There was an 88% reduction in airborne drift exiting the shelterbelt as compared to the drift entering the shelterbelt, which likely caused the reduction in deposition in the shelterbelt’s lee. It was shown that there was a larger proportion of drift diverted over the top of the shelterbelt as compared to the drift exiting the shelterbelt. Although not apparent in these experiments, this suggested that there may be increased deposition further downwind from the shelterbelt as compared to the open field

Exploring Minimal Scenarios to Produce Transversely Bright Electron Beams Using the Eigen-Emittance Concept

Next generation hard X-ray free electron lasers require electron beams with low transverse emittance. One proposal to achieve these low emittances is to exploit the eigen-emittance values of the beam. The eigen-emittances are invariant under linear beam transport and equivalent to the emittances in an uncorrelated beam. If a correlated beam with two small eigen-emittances can be produced, removal of the correlations via appropriate optics will lead to two small emittance values, provided non-linear effects are not too large. We study how such a beam may be produced using minimal linear correlations. We find it is theoretically possible to produce such a beam, however it may be more difficult to realize in practice. We identify linear correlations that may lead to physically realizable emittance schemes and discuss promising future avenues.Comment: 7 pages, 2 figures, to appear in NIM

Linkage design effect on the reliability of surface-micromachined microengines driving a load

The reliability of microengines is a function of the design of the mechanical linkage used to connect the electrostatic actuator to the drive. The authors have completed a series of reliability stress tests on surface micromachined microengines driving an inertial load. In these experiments, the authors used microengines that had pin mechanisms with guides connecting the drive arms to the electrostatic actuators. Comparing this data to previous results using flexure linkages revealed that the pin linkage design was less reliable. The devices were stressed to failure at eight frequencies, both above and below the measured resonance frequency of the microengine. Significant amounts of wear debris were observed both around the hub and pin joint of the drive gear. Additionally, wear tracks were observed in the area where the moving shuttle rubbed against the guides of the pin linkage. At each frequency, they analyzed the statistical data yielding a lifetime (t{sub 50}) for median cycles to failure and {sigma}, the shape parameter of the distribution. A model was developed to describe the failure data based on fundamental wear mechanisms and forces exhibited in mechanical resonant systems. The comparison to the model will be discussed

A direct fate exclusion mechanism by Sonic Hedgehog-regulated transcriptional repressors

Sonic hedgehog (Shh) signaling patterns the vertebrate spinal cord by activating a group of transcriptional repressors in distinct neural progenitors of somatic motor neuron and interneuron subtypes. To identify the action of this network, we performed a genome-wide analysis of the regulatory actions of three key ventral determinants in mammalian neural tube patterning: Nkx2.2, Nkx6.1 and Olig2. Previous studies have demonstrated that each factor acts predominantly as a transcriptional repressor, at least in part, to inhibit alternative progenitor fate choices. Here, we reveal broad and direct repression of multiple alternative fates as a general mechanism of repressor action. Additionally, the repressor network targets multiple Shh signaling components providing negative feedback to ongoing Shh signaling. Analysis of chromatin organization around Nkx2.2-, Nkx6.1- and Olig2-bound regions, together with co-analysis of engagement of the transcriptional activator Sox2, indicate that repressors bind to, and probably modulate the action of, neural enhancers. Together, the data suggest a model for neural progenitor specification downstream of Shh signaling, in which Nkx2.2 and Olig2 direct repression of alternative neural progenitor fate determinants, an action augmented by the overlapping activity of Nkx6.1 in each cell type. Integration of repressor and activator inputs, notably activator inputs mediated by Sox2, is probably a key mechanism in achieving cell type-specific transcriptional outcomes in mammalian neural progenitor fate specification

Structures and Heats of Formation of Simple Alkaline Earth Metal Compounds II: Fluorides, Chlorides, Oxides, and Hydroxides for Ba, Sr, and Ra

Geometry parameters, vibrational frequencies, heats of formation, bond dissociation energies, cohesive energies, and selected fluoride affinities (difluorides) are predicted for the late alkaline earth (Sr, Ba and Ra) oxides, fluorides, chlorides, and hydroxides at the coupled cluster theory [CCSD(T)] level. Additional corrections (scalar relativistic and pseudopotential corrections, vibrational zero-point energies, and atomic spin-orbit effects) were included to accurately calculate the total atomization energies and heats of formation following the Feller-Peterson-Dixon methodology. The calculated values are compared to the experimental data where available. In some cases, especially for Ra compounds, there are no experimental results or the experimental energetics and geometries are not reliable or have very large error bars. All of the Sr, Ba and Ra difluorides, dichlorides and dihydroxides are bent structures with the OMO bond angles decreasing going down the group. The cohesive energy of bulk Be dihalides are predicted to be quite low while those of Ra are relatively large. The fluoride affinities show that the difluorides are moderately strong Lewis acids and that such trifluorides may form under the appropriate experimental conditions

Time-resolved infrared studies of the dynamics of ligand binding to cytochrome c oxidase

Time-resolved infrared spectroscopy (TRIRS) has been employed to study the reactions of small molecules with the cytochrome a{sub 3}-Cu{sub B} site of cytochrome c oxidase (CcO). All phases of these reactions have been investigated, from ultrafast phenomena (hundreds of femtoseconds) to relatively slow processes (milliseconds). The ligation dynamics immediately following photodissociation have been studied using a TRIR technique with time resolution of less than 1 ps. The rate of photoinitiated transfer of CO from Fe{sub a3}{sup 2+} to Cu{sub B}{sup +} was measured directly by monitoring the development of the transient Cu{sub B}{sup +}-CO absorption. The development of a stationary Cu{sub B}{sup +}-CO spectrum which is constant until the CO dissociates from Cu{sub B}{sup +} occurs in less than 1 ps, indicating that the photoinitiated transfer of CO is remarkably fast. This unprecedented ligand transfer rate has profound implications with regard to the structure and dynamics of the cytochrome a{sub 3}-Cu{sub B} site, the functional architecture of the protein and coordination dynamics in general. The photodissociation and recombination of Cn{sup {minus}} has also been studied using a real-time TRIR technique. The CN{sup {minus}} recombination rate of 430 s{sup {minus}1} is consistent with a recombination pathway similar to the one they have previously proposed for CO. The authors suggest the rate determining step for CN{sup {minus}} recombination is the thermal dissociation of the Fe{sub a3}{sup 2+}-L bond. 25 refs., 7 figs

Regression modeling weather and biolsolids effects on dryland wheat yields in Eastern Colorado, 2001-2012

In the western Great Plains, climate dictates dryland wheat (Triticum aestivum, L) productivity. Producers use inorganic N fertilizers to improve crop yields in this region, while municipalities recycle sewage biosolids in the area. Will biosolids (from the Littleton/Englewood, CO Wastewater Treatment Plant) applications to western Great Plains dryland agroecosystems interact with weather to affect wheat production? To this end, we regressed crop yields on weather variables from 2000 through 2011 at a site about 40 km (approximately 25 miles) east of Byers, CO (Byers). We used SAS (Proc Reg) to develop several multiple regression models to predict crop yields. Our model of choice included four weather parameters for Byers wheat production. Regression variables included September and May precipitation and October and May monthly mean temperatures. Biosolids or nitrogen fertilizer application did not appear in our chosen model. We validated the wheat models using weather data and yields from the Colorado State University (CSU) Crops Testing Program from Akron, Burlington, Lamar, and Yuma, CO. According to t-tests comparing mean observed and predicted yields, the Byers model predicted yields from 2000-2011 at these locations with a +5.3% mean absolute error. A positive result of these analyses is that biosolids produced the same crop yields as commercial N fertilizer from 2001 through 2011