4,177 research outputs found
Efficient reconstruction of dispersive dielectric profiles using time domain reflectometry (TDR)
We present a numerical model for time domain reflectometry (TDR) signal propagation in dispersive dielectric materials. The numerical probe model is terminated with a parallel circuit, consisting of an ohmic resistor and an ideal capacitance. We derive analytical approximations for the capacitance, the inductance and the conductance of three-wire probes. We couple the time domain model with global optimization in order to reconstruct water content profiles from TDR traces. For efficiently solving the inverse problem we use genetic algorithms combined with a hierarchical parameterization. We investigate the performance of the method by reconstructing synthetically generated profiles. The algorithm is then applied to retrieve dielectric profiles from TDR traces measured in the field. We succeed in reconstructing dielectric and ohmic profiles where conventional methods, based on travel time extraction, fail
Collaborative Research: Subglacial Water Intrusion in Greenland
The project\u27s goals are: To analyse radio echo sounding data acquired over the Greenland Ice Sheet by the University of Kansas / CReSIS team with the objective of discriminating between frozen and thawed conditions at the bed of the ice sheet. To provide maps of the bed state, with the aim of making them available via the National Snow and Ice Data Centre. To support ice sheet modelling activities by providing information on the bed state, thus related to the temperature at the bed and the rheological conditions at the bed. To make available to educational establishments information on the relevance and significance of the state of the major ice sheets and the Greenland Ice Sheet in particula
Collaborative Research: Subglacial Water Intrusion in Greenland
A full understanding of the flow and dynamics of an ice sheet will require knowledge of the state of its subglacial interface. While the topography of the Greenland Ice Sheet bed has been studied by radio echo sounding, its state in terms of melting and freezing, which itself affects its future evolution, has been inferred from numerical models, rather than from direct evidence. This project is for analysis of existing radar echo data gathered under the PARCA and CReSIS programs, with the objective of generating direct evidence of the extent of subglacial water in Greenland and providing the glaciological community with maps of its extent. Previous echo analysis has found the variability of the received signal too great to extract the component due to variation of the bed material. Now, a method has been developed, validated and reported, based on further analysis of radio echo signal intensities, which allows the state of the bed to be determined reliably. This work will apply this method to all the available radio echo data, to generate maps of the extent of basal melting throughout Greenland. The procedure relies on a more precise assessment of radio echoes from the bed of the ice sheet than has previously been provided. It allows the variability of echo intensity to be reduced, and the variation of the bed material to be detected. It has been tested with data from a number of flights over Greenland during the 1999 field season, and is validated by tests of self-consistency, of echo intensity statistics, of interface smoothness, and of the relation between measured surface and interface slopes. The team will process data from flights undertaken between 1998 and 2005. Appropriate tests of self-consistency and statistical behavior will be applied. The presence or absence of water will be determined throughout. Results will be interpreted and maps compiled illustrating these results. The continuity and topographical context of each major water feature will be investigated and compared
Dynamic analysis of multimesh-gear helicopter transmissions
A dynamic analysis of multimesh-gear helicopter transmission systems was performed by correlating analytical simulations with experimental investigations. The two computer programs used in this study, GRDYNMLT and PGT, were developed under NASA/Army sponsorship. Parametric studies of the numerical model with variations on mesh damping ratios, operating speeds, tip-relief tooth modifications, and tooth-spacing errors were performed to investigate the accuracy, application, and limitations of the two computer programs. Although similar levels of dynamic loading were predicted by both programs, the computer code GRDYNMLT was found to be superior and broader in scope. Results from analytical work were also compared with experimental data obtained from the U.S. Army's UH-60A Black Hawk 2240-kW (3000-hp) class, twin-engine helicopter transmission tested at the NASA Lewis Research Center. Good correlation in gear stresses was obtained between the analytical model simulated by GRDYNMLT and the experimental measurements. More realistic mesh damping can be predicted through experimental data correlation
Vibration and noise analysis of a gear transmission system
This paper presents a comprehensive procedure to predict both the vibration and noise generated by a gear transmission system under normal operating conditions. The gearbox vibrations were obtained from both numerical simulation and experimental studies using a gear noise test rig. In addition, the noise generated by the gearbox vibrations was recorded during the experimental testing. A numerical method was used to develop linear relationships between the gearbox vibration and the generated noise. The hypercoherence function is introduced to correlate the nonlinear relationship between the fundamental noise frequency and its harmonics. A numerical procedure was developed using both the linear and nonlinear relationships generated from the experimental data to predict noise resulting from the gearbox vibrations. The application of this methodology is demonstrated by comparing the numerical and experimental results from the gear noise test rig
Optical Characterisation of MOVPE Grown Vertically Correlated InAs/GaAs Quantum Dots
Structures with self-organised InAs quantum dots in a GaAs matrix were grown
by the low pressure metal-organic vapour phase epitaxy (LP-MOVPE) technique.
Photoluminescence in combination with photomodulated reflectance spectroscopy
were used as the main characterisation methods for the growth optimisation.
Results show that photoreflectance spectroscopy is an excellent tool for
characterisation of QD structures wetting layers (thickness and composition)
and for identification of spacers in vertically stacked QDs structures.Comment: Submitted on behalf of TIMA Editions
(http://irevues.inist.fr/tima-editions
Modal simulation of gearbox vibration with experimental correlation
A newly developed global dynamic model was used to simulate the dynamics of a gear noise rig at NASA Lewis Research Center. Experimental results from the test rig were used to verify the analytical model. In this global dynamic model, the number of degrees of freedom of the system are reduced by transforming the system equations of motion into modal coordinates. The vibration of the individual gear-shaft system are coupled through the gear mesh forces. A three-dimensional, axial-lateral coupled, bearing model was used to couple the casing structural vibration to the gear-rotor dynamics. The coupled system of modal equations is solved to predict the resulting vibration at several locations on the test rig. Experimental vibration data was compared to the predictions of the global dynamic model. There is excellent agreement between the vibration results from analysis and experiment
Microsecond-to-second Timescale Motions In The Ligand Binding Domain Of Glutamate Receptor 2
- …