Advantageous grain boundaries in iron pnictide superconductors

High critical temperature superconductors have zero power consumption and could be used to produce ideal electric power lines. The principal obstacle in fabricating superconducting wires and tapes is grain boundaries-the misalignment of crystalline orientations at grain boundaries, which is unavoidable for polycrystals, largely deteriorates critical current density. Here, we report that High critical temperature iron pnictide superconductors have advantages over cuprates with respect to these grain boundary issues. The transport properties through well-defined bicrystal grain boundary junctions with various misorientation angles (thetaGB) were systematically investigated for cobalt-doped BaFe2As2 (BaFe2As2:Co) epitaxial films fabricated on bicrystal substrates. The critical current density through bicrystal grain boundary (JcBGB) remained high (> 1 MA/cm2) and nearly constant up to a critical angle thetac of ~9o, which is substantially larger than the thetac of ~5o for YBCO. Even at thetaGB > thetac, the decay of JcBGB was much smaller than that of YBCO.Comment: to appear in Nature Communication

Thin film growth by pulsed laser deposition and properties of 122-type iron-based superconductor AE(Fe1--xCox)2As2 (AE = alkaline earth)

This paper reports comprehensive results on thin-film growth of 122-type iron-pnictide superconductors, AE(Fe1-xCox)2As2 (AE = Ca, Sr, and Ba, AEFe2As2:Co) by a pulsed laser deposition method using a neodymium-doped yttrium aluminum garnet laser as an excitation source. The most critical parameter to produce the SrFe2As2:Co and BaFe2As2:Co phases is the substrate temperature (Ts). It is difficult to produce highly-pure CaFe2As2:Co phase thin film at any Ts. For BaFe2As2:Co epitaxial films, controlling Ts at 800-850 {\deg}C and growth rate to 2.8-3.3 {\AA}/s produced high-quality films with good crystallinity, flat surfaces, and high critical current densities > 1 MA/cm2, which were obtained for film thicknesses from 100 to 500 nm. The doping concentration x was optimized for Ba(Fe1-xCox)2As2 epitaxial films, leading to the highest critical temperature of 25.5 K in the epitaxial films with the nominal x = 0.075.Comment: will be published in the special issue of Superconductor Science and Technology, `Iron12

DC superconducting quantum interference devices fabricated using bicrystal grain boundary junctions in Co-doped BaFe2As2 epitaxial films

DC superconducting quantum interference devices (dc-SQUIDs) were fabricated in Co-doped BaFe2As2 epitaxial films on (La, Sr)(Al, Ta)O3 bicrystal substrates with 30deg misorientation angles. The 18 x 8 micro-meter^2 SQUID loop with an estimated inductance of 13 pH contained two 3 micro-meter wide grain boundary junctions. The voltage-flux characteristics clearly exhibited periodic modulations with deltaV = 1.4 micro-volt at 14 K, while the intrinsic flux noise of dc-SQUIDs was 7.8 x 10^-5 fai0/Hz^1/2 above 20 Hz. The rather high flux noise is mainly attributed to the small voltage modulation depth which results from the superconductor-normal metal-superconductor junction nature of the bicrystal grain boundary

NRAS and BRAF mutation frequency in primary oral mucosal melanoma

Oral mucosal melanoma (OMM) is a fatal sarcoma of unknown etiology. Histological morphology and genetic events are distinct from those of its cutaneous counterpart. Mutation and up-regulation of c-kit has been identified in OMM which may activate downstream molecules such as RAS and RAF. These molecules are involved in the mitogen-activated protein kinase (MAPK) pathway leading to tremendous cell proliferation and survival. NRAS and BRAF mutation and protein expression have been studied in other melanoma subtypes. The purpose of this study was to determine RAS protein expression and NRAS and BRAF mutation in 18 primary OMM cases using immunohistochemistry and mutation analysis. Results showed that RAS is intensely expressed in both in situ and invasive OMMs. However, NRAS mutation was only observed in 2/15 polymerase chain reaction (PCR) amplified cases both of which were silent mutations. On the other hand, BRAF missense mutations were observed only in 1/15 cases with PCR amplification. NRAS and BRAF mutations were independent from previously reported c-kit mutations. The classical V600E BRAF mutation was not found; instead a novel V600L was observed suggesting that the oncogenic event in OMM is different from that in skin melanoma. The low frequency of NRAS and BRAF mutations indicate that these genes are not common, but probable events in OMM pathogenesis, most likely independent of c-kit mutation. This record was migrated from the OpenDepot repository service in June, 2017 before shutting down

Analysis of interdiffusion between SmFeAsO0.92F0.08 and metals for ex situ fabrication of superconducting wire

We demonstrate the fabrication of superconducting SmFeAsO1-xFx (Sm-1111) wires by using the ex-situ powder-in-tube technique. Sm-1111 powder and a binder composed of SmF3, samarium arsenide, and iron arsenide were used to synthesize the superconducting core. Although the F content of Sm-1111 is reduced in the process of ex-situ fabrication, the binder compensates by sufficiently supplementing the F content, thereby preventing a decrease in the superconducting transition temperature and a shrinking of the superconducting volume fraction. Thus, in the superconducting Sm-1111 wire with the binder, the transport critical current density reaches the highest value of ~4000 A/cm2 at 4.2 K

Thin Film Growth and Device Fabrication of Iron-Based Superconductors

Iron-based superconductors have received much attention as a new family of high-temperature superconductors owing to their unique properties and distinct differences from cuprates and conventional superconductors. This paper reviews progress in thin film research on iron-based superconductors since their discovery for each of five material systems with an emphasis on growth, physical properties, device fabrication, and relevant bulk material properties.Comment: To appear in J. Phys. Soc. Jp

Ultralow-dissipative conductivity by Dirac fermions in BaFe2_2As2_2

We report on the anomalous behavior of the complex conductivity of BaFe$_{2}$As$_{2}$, which is related to the Dirac cone, in the terahertz (THz)-frequency region. Above the spin-density-wave (SDW) transition temperature, the conductivity spectra follow the Drude model. In the SDW state, the imaginary part of the complex conductivity, $\sigma_2$, is suppressed in comparison to that expected according to the Drude model. The real part, $\sigma_1$, exhibits nearly Drude-like behavior. This behavior (i.e., almost no changes in $\sigma_1$ and the depression of $\sigma_2$) can be regarded as the addition of extra conductivity without any dissipations in the Drude-type conductivity. The origin of this ultralow-dissipative conductivity is found to be due to conductivity contribution from quasiparticles within the Dirac cone. In other words, we are able to observe the dynamics of Dirac fermions through the conductivity spectra of BaFe$_2$As$_2$, clearly and directly.Comment: 5pages, 3 figure

Spectroscopic scanning tunneling microscopy insights into Fe-based superconductors

In the first three years since the discovery of Fe-based high Tc superconductors, scanning tunneling microscopy (STM) and spectroscopy have shed light on three important questions. First, STM has demonstrated the complexity of the pairing symmetry in Fe-based materials. Phase-sensitive quasiparticle interference (QPI) imaging and low temperature spectroscopy have shown that the pairing order parameter varies from nodal to nodeless s\pm within a single family, FeTe1-xSex. Second, STM has imaged C4 -> C2 symmetry breaking in the electronic states of both parent and superconducting materials. As a local probe, STM is in a strong position to understand the interactions between these broken symmetry states and superconductivity. Finally, STM has been used to image the vortex state, giving insights into the technical problem of vortex pinning, and the fundamental problem of the competing states introduced when superconductivity is locally quenched by a magnetic field. Here we give a pedagogical introduction to STM and QPI imaging, discuss the specific challenges associated with extracting bulk properties from the study of surfaces, and report on progress made in understanding Fe-based superconductors using STM techniques.Comment: 36 pages, 23 figures, 229 reference

Photoinduced transient states of antiferromagnetic orderings in La1 3Sr2 3FeO3 and SrFeO3 delta thin films observed through time resolved resonant soft x ray scattering

The relationship between the magnetic interaction and photoinduced dynamics in antiferromagnetic perovskites is investigated in this study. In La1 3Sr2 3FeO3 thin films, commensurate spin ordering is accompanied by charge disproportionation, whereas SrFeO3 amp; 8722; amp; 948; thin films show incommensurate helical antiferromagnetic spin ordering due to increased ferromagnetic coupling compared to La1 3Sr2 3FeO3. To understand the photoinduced spin dynamics in these materials, we investigate the spin ordering through time resolved resonant soft x ray scattering. In La1 3Sr2 3FeO3, ultrafast quenching of the magnetic ordering within 130 fs through a nonthermal process is observed, triggered by charge transfer between the Fe atoms. We compare this to the photoinduced dynamics of the helical magnetic ordering of SrFeO3 amp; 8722; amp; 948;. We find that the change in the magnetic coupling through optically induced charge transfer can offer an even more efficient channel for spin order manipulatio