Gate-tunable bandgap in bilayer graphene

The tight-binding model of bilayer graphene is used to find the gap between the conduction and valence bands, as a function of both the gate voltage and as the doping by donors or acceptors. The total Hartree energy is minimized and the equation for the gap is obtained. This equation for the ratio of the gap to the chemical potential is determined only by the screening constant. Thus the gap is strictly proportional to the gate voltage or the carrier concentration in the absence of donors or acceptors. In the opposite case, where the donors or acceptors are present, the gap demonstrates the asymmetrical behavior on the electron and hole sides of the gate bias. A comparison with experimental data obtained by Kuzmenko et al demonstrates the good agreement.Comment: 6 pages, 5 figure

Boron doping of silicon layers grown by liquid phase epitaxy

This paper presents the results of a study of the incorporation of boron into silicon layers grown from a tin melt by liquid phase epitaxy. Boron was added to the melt through the use of boron-doped silicon source wafers. There is a large discrepancy between the amount of boron incorporated into the epitaxial layer and that available in the source wafer. This mismatch is explained by the gradual removal of boron from our system, most likely as a result of boron precipitation in the tin melt. This situation allows for control of the boron profile by adjusting the cooling rate and adding a dwell time. In this way, we have grown an epitaxial layer with an abrupt and highly doped p-type region at the epitaxial layer/substrate interface. This is useful for thin film solar cell applications as it allows the growth of a back surface field and a lightly doped bulk in a single growth step

A Secure Integrated Framework for Fog-Assisted Internet of Things Systems

Fog-Assisted Internet of Things (Fog-IoT) systems are deployed in remote and unprotected environments, making them vulnerable to security, privacy, and trust challenges. Existing studies propose security schemes and trust models for these systems. However, mitigation of insider attacks, namely blackhole, sinkhole, sybil, collusion, self-promotion, and privilege escalation, has always been a challenge and mostly carried out by the legitimate nodes. Compared to other studies, this paper proposes a framework featuring attribute-based access control and trust-based behavioural monitoring to address the challenges mentioned above. The proposed framework consists of two components, the security component (SC) and the trust management component (TMC). SC ensures data confidentiality, integrity, authentication, and authorization. TMC evaluates Fog-IoT entities’ performance using a trust model based on a set of QoS and network communication features. Subsequently, trust is embedded as an attribute within SC’s access control policies, ensuring that only trusted entities are granted access to fog resources. Several attacking scenarios, namely DoS, DDoS, probing, and data theft are designed to elaborate on how the change in trust triggers the change in access rights and, therefore, validates the proposed integrated framework’s design principles. The framework is evaluated on a Raspberry Pi 3 Model B to benchmark its performance in terms of time and memory complexity. Our results show that both SC and TMC are lightweight and suitable for resource-constrained devices

A discrete time-dependent method for metastable atoms in intense fields

The full-dimensional time-dependent Schrodinger equation for the electronic dynamics of single-electron systems in intense external fields is solved directly using a discrete method. Our approach combines the finite-difference and Lagrange mesh methods. The method is applied to calculate the quasienergies and ionization probabilities of atomic and molecular systems in intense static and dynamic electric fields. The gauge invariance and accuracy of the method is established. Applications to multiphoton ionization of positronium and hydrogen atoms and molecules are presented. At very high intensity above saturation threshold, we extend the method using a scaling technique to estimate the quasienergies of metastable states of the hydrogen molecular ion. The results are in good agreement with recent experiments.Comment: 10 pages, 9 figure, 4 table

Nonequilibrium fluctuation induced escape from a metastable state

Based on a simple microscopic model where the bath is in a non-equilibrium state we study the escape from a metastable state in the over-damped limit. Making use of Fokker-Planck-Smoluchowski description we derive the time dependent escape rate in the non-stationary regime in closed analytical form which brings on to fore a strong non-exponential kinetic of the system mode.Comment: 4 pages, no figures, EPJ class file include

Low-energy excitations of a boson pair in a double-well trap

The states of a boson pair in a one-dimensional double-well potential are investigated. Properties of the ground and lowest excited states of this system are studied, including the two-particle wavefunction, momentum pair distribution and entanglement. The effects of varying both the barrier height and the effective interaction strength are investigated.Comment: 16 pages, 15 figure

Membrane-Based Water Evaporator for a Space Suit

A membrane-based water evaporator has been developed that is intended to serve as a heat-rejection device for a space suit. This evaporator would replace the current sublimator that is sensitive to contamination of its feedwater. The design of the membrane-based evaporator takes advantage of recent advances in hydrophobic micropore membranes to provide robust heat rejection with much less sensitivity to contamination. The low contamination sensitivity allows use of the heat transport loop as feedwater, eliminating the need for the separate feedwater system used for the sublimator. A cross section of the evaporator is shown in the accompanying figure. The space-suit cooling loop water flows into a distribution plenum, through a narrow annulus lined on both sides with a hydrophobic membrane, into an exit plenum, and returns to the space suit. Two perforated metal tubes encase the membranes and provide structural strength. Evaporation at the membrane inner surface dissipates the waste heat from the space suit. The water vapor passes through the membrane, into a steam duct and is vented to the vacuum environment through a back-pressure valve. The back-pressure setting can be adjusted to regulate the heat-rejection rate and the water outlet temperature