Laser speckle technique for burner liner strain measurements

Thermal and mechanical strains were measured on samples of a common material used in jet engine burner liners, which were heated from room temperature to 870 C and cooled back to 220 C, in a laboratory furnance. The physical geometry of the sample surface was recorded at selected temperatures by a set of 12 single exposure speckle-grams. Sequential pairs of specklegrams were compared in a heterodyne interferometer which give high precision measurement of differential displacements. Good speckle correlation between the first and last specklegrams is noted which allows a check on accumulate errors

Demonstration of laser speckle system on burner liner cyclic rig

A demonstration test was conducted to apply speckle photogrammetry to the measurement of strains on a sample of combustor liner material in a cyclic fatigue rig. A system for recording specklegrams was assembled and shipped to the NASA Lewis Research Center, where it was set up and operated during rig tests. Data in the form of recorded specklegrams were sent back to United Technologies Research Center for processing to extract strains. Difficulties were found in the form of warping and bowing of the sample during the tests which degraded the data. Steps were taken by NASA personnel to correct this problem and further tests were run. Final data processing indicated erratic patterns of strain on the burner liner sample

Demonstration test of burner liner strain measurement systems: Interim results

Work is in progress to demonstrate two techniques for static strain measurements on a jet engine burner liner. Measurements are being made with a set of resistance strain gages made from Kanthal A-1 wire and via heterodyne speckle photogrammetry. The background of the program is presented along with current results

Demonstration test of burner liner strain measuring system

A demonstration test was conducted for two systems of static strain measurement that had been shown to have potential for application jet engine combustors. A modified JT12D combustor was operated in a jet burner test stand while subjected simultaneously to both systems of instrumentation, i.e., Kanthal A-1 wire strain gages and laser speckle photography. A section of the burner was removed for installation and calibration of the wire gages, and welded back into the burner. The burner test rig was modified to provide a viewing port for the laser speckle photography such that the instrumented section could be observed during operation. Six out of ten wire gages survived testing and showed excellent repeatability. The extensive precalibration procedures were shown to be effective in compensating for the large apparent strains associated with these gages. Although all portions of the speckle photography system operated satisfactorily, a problem was encountered in the form of optical inhomogeneities in the hot, high-pressure gas flowing by the combustor case which generate large and random apparent strain distributions

Discovery of a rapidly pulsating subdwarf B star candidate in omega Cen

We report the discovery of the first variable extreme horizontal branch star in a globular cluster (omega Cen). The oscillation uncovered has a period of 114 s and an amplitude of 32 mmags. A comparison between horizontal branch models and observed optical colours indicates an effective temperature of 31,500+-6,300 K for this star, placing it within the instability strip for rapidly oscillating B subdwarfs. The time scale and amplitude of the pulsation detected are also in line with what is expected for this type of variable, thus strengthening the case for the discovery of a new subdwarf B pulsator.Comment: 5 pages, 7 figures; accepted for publication in A&

Autonomous Payload Operations Onboard the International Space Station

Operating the International Space Station (ISS) involves many complex crew tended, ground operated and combined systems. Over the life of the ISS program, it has become evident that by having automated and autonomous systems on board, more can be accomplished and at the same time reduce the workload of the crew and ground operators. Engineers at the National Aeronautics and Space Administration's (NASA) Marshall Space Flight Center in Huntsville Alabama, working in collaboration with The Charles Stark Draper Laboratory have developed an autonomous software system that uses the Timeliner User Interface Language and expert logic to continuously monitor ISS payload systems, issue commands and signal ground operators as required. This paper describes the development history of the system, its concept of operation and components. The paper also discusses the testing process as well as the facilities used to develop the system. The paper concludes with a description of future enhancement plans for use on the ISS as well as potential applications to Lunar and Mars exploration systems

A Photometric Study of the Outer Halo Globular Cluster NGC 5824

Multi-wavelength CCD photometry over 21 years has been used to produce deep color-magnitude diagrams together with light curves for the variables in the Galactic globular cluster NGC 5824. Twenty-one new cluster RR Lyrae stars are identified, bringing the total to 47, of which 42 have reliable periods determined for the first time. The color-magnitude diagram is matched using BaSTI isochrones with age of $13$~Gyr. and reddening is found to be $E(B-V) = 0.15 \pm0.02$; using the period-Wesenheit relation in two colors the distance modulus is $(m-M)_0=17.45 \pm 0.07$ corresponding to a distance of 30.9 Kpc. The observations show no signs of populations that are significantly younger than the $13$~Gyr stars. The width of the red giant branch does not allow for a spread in [Fe/H] greater than $\sigma = 0.05$ dex, and there is no photometric evidence for widened or parallel sequences. The $V, c_{UBI}$ pseudo-color magnitude diagram shows a bifurcation of the red giant branch that by analogy with other clusters is interpreted as being due to differing spectral signatures of the first (75\%) and second (25\%) generations of stars whose age difference is close enough that main sequence turnoffs in the color-magnitude diagram are unresolved. The cluster main sequence is visible against the background out to a radial distance of $\sim17$ arcmin. We conclude that NGC 5824 appears to be a classical Oosterhoff Type II globular cluster, without overt signs of being a remnant of a now-disrupted dwarf galaxy.Comment: 26 pages, 15 figures, 4 tables, accepted for publication in Astronomical Journa

The HST Key Project on the Extragalactic Distance Scale. XXII. The Discovery of Cepheids in NGC 1326-A

We report on the detection of Cepheids and the first distance measurement to the spiral galaxy NGC 1326-A, a member of the Fornax cluster of galaxies. We have employed data obtained with the Wide Field and Planetary Camera 2 on board the Hubble Space Telescope. Over a 49 day interval, a total of twelve V-band (F555W) and eight I-band (F814W) epochs of observation were obtained. Two photometric reduction packages, ALLFRAME and DoPHOT, have been employed to obtain photometry measures from the three Wide Field CCDs. Variability analysis yields a total of 17 Cepheids in common with both photometry datasets, with periods ranging between 10 and 50 days. Of these 14 Cepheids with high-quality lightcurves are used to fit the V and I period-luminosity relations and derive apparent distance moduli, assuming a Large Magellanic Cloud distance modulus (m-M) (LMC) = 18.50 +- 0.10 mag and color excess E(B-V) = 0.10 mag. Assuming A(V)/E(V-I) = 2.45, the DoPHOT data yield a true distance modulus to NGC 1326-A of (m-M)_0 = 31.36 +- 0.17 (random) +- 0.13 (systematic) mag, corresponding to a distance of 18.7 \pm 1.5 (random) \pm 1.2 (systematic) Mpc. The derived distance to NGC 1326-A is in good agreement with the distance derived previously to NGC 1365, another spiral galaxy member of the Fornax cluster. However the distances to both galaxies are significantly lower than to NGC 1425, a third Cepheid calibrator in the outer parts of the cluster.Comment: 33 pages A gzipped tar file containing 12 figures can be obtained from http://www.ipac.caltech.edu/H0kp/n1326a/n1326a.htm

Deep HST Imaging in NGC 6397: Stellar Dynamics

Multi-epoch observations with ACS on HST provide a unique and comprehensive probe of stellar dynamics within NGC 6397. We are able to confront analytic models of the globular cluster with the observed stellar proper motions. The measured proper motions probe well along the main sequence from 0.8 to below 0.1 M$_\odot$ as well as white dwarfs younger than one gigayear. The observed field lies just beyond the half-light radius where standard models of globular cluster dynamics (e.g. based on a lowered Maxwellian phase-space distribution) make very robust predictions for the stellar proper motions as a function of mass. The observed proper motions show no evidence for anisotropy in the velocity distribution; furthermore, the observations agree in detail with a straightforward model of the stellar distribution function. We do not find any evidence that the young white dwarfs have received a natal kick in contradiction with earlier results. Using the observed proper motions of the main-sequence stars, we obtain a kinematic estimate of the distance to NGC 6397 of $2.2^{+0.5}_{-0.7}$ kpc and a mass of the cluster of $1.1 \pm 0.1 \times 10^5 \mathrm{M}_\odot$ at the photometric distance of 2.53 kpc. One of the main-sequence stars appears to travel on a trajectory that will escape the cluster, yielding an estimate of the evaporation timescale, over which the number of stars in the cluster decreases by a factor of e, of about 3 Gyr. The proper motions of the youngest white dwarfs appear to resemble those of the most massive main-sequence stars, providing the first direct constraint on the relaxation time of the stars in a globular cluster of greater than or about 0.7 Gyr.Comment: 25 pages, 20 figures, accepted for publication in Astrophysical Journa