407 research outputs found
A morphological study of the posterior communicating artery
This study aims to identify and yield a better understanding of the origin of the
posterior communicating artery, its perforating branches and the relations in
the vicinity of that artery. In 30 brains filled with a mixture of latex through the
internal carotid and basilar arteries the posterior communicating artery originated
from the posterior aspect of the C4 part of the internal carotid artery in
20 hemispheres (66.6%) and from its postero-lateral part in 8 hemispheres (26.6%).
In 2 hemispheres (6.6%), however, it originated from the anterior aspect of the
internal carotid artery. In 8 hemispheres (26.6%) a foetal type of posterior communicating
artery was observed. It was 11.94 mm (8.03–15.07 mm) in length
from the origin of the PCoA to the point of union with the posterior cerebral
artery. The PCoA gave 5, 8 perforating branches (4–9). The distance of the
origin of these branches from the origin of the PCoA was 3.30 mm (0.06–9.05)
and the area occupied by the origins of the perforating branches was 4.53 mm
(0.01–9.07). The perforating branches of the posterior communicating artery
were generally dense in the initial 2/3 of the artery. Consequently, the posterior
third of the posterior communicating artery seems to be a safer area during
surgical operations. As the perforating branches are dense in the initial 2/3 of
the artery, this region is at highest risk of damage during operations
Recommended from our members
Institutional suicide as anomie: decedents speak out for work-related suicides through a Durkheimian exploration of suicide notes in a context without institutional responsibilization for suicide prevention
Data availability statement:
Publicly available information has been analyzed in this study. Links to the online sources have not been included with the article in order to protect the privacy of the individuals affected. Queries regarding the source material should be directed to the corresponding author.Introduction: Drawing on Durkheim’s historical theorization of suicide, we extend his concept of anomic suicide, which is suicide due to a lack of social regulation, to introduce the concept of institutional suicide. We define institutional suicide as suicide due to the absence or decline of institutional policies, practices, and discourses for prevention. In this study, we explore the mechanisms for institutional suicides based on suicide notes Turkey, in a context without institutional responsibilization for prevention. Turkey provides a significant context for studying institutional suicides as policies, practices, and discourses for suicide prevention have been declining for some decades.
Methods: Drawing on publically available suicide notes and narratives in Turkish media outlets, we analyze 17 suicide notes and responses from their institutions of work and friends, family, and colleagues.
Findings and Discussion: We identify two mechanisms that lead to institutional suicides: (1) dehumanization due to lack of recognition and (2) misrecognition through a devaluation of potential. We extend the theory of anomie to institutional settings and offer social policy suggestions to improve institutional responses based on co-design based on suicide notes to prevent institutional suicides and call for institutional responsibilization for preventing work-related suicides.The author(s) declare that no financial support was received for the research, authorship, and/or publication of this article
Characterization and simulation of cDNA microarray spots using a novel mathematical model
<p>Abstract</p> <p>Background</p> <p>The quality of cDNA microarray data is crucial for expanding its application to other research areas, such as the study of gene regulatory networks. Despite the fact that a number of algorithms have been suggested to increase the accuracy of microarray gene expression data, it is necessary to obtain reliable microarray images by improving wet-lab experiments. As the first step of a cDNA microarray experiment, spotting cDNA probes is critical to determining the quality of spot images.</p> <p>Results</p> <p>We developed a governing equation of cDNA deposition during evaporation of a drop in the microarray spotting process. The governing equation included four parameters: the surface site density on the support, the extrapolated equilibrium constant for the binding of cDNA molecules with surface sites on glass slides, the macromolecular interaction factor, and the volume constant of a drop of cDNA solution. We simulated cDNA deposition from the single model equation by varying the value of the parameters. The morphology of the resulting cDNA deposit can be classified into three types: a doughnut shape, a peak shape, and a volcano shape. The spot morphology can be changed into a flat shape by varying the experimental conditions while considering the parameters of the governing equation of cDNA deposition. The four parameters were estimated by fitting the governing equation to the real microarray images. With the results of the simulation and the parameter estimation, the phenomenon of the formation of cDNA deposits in each type was investigated.</p> <p>Conclusion</p> <p>This study explains how various spot shapes can exist and suggests which parameters are to be adjusted for obtaining a good spot. This system is able to explore the cDNA microarray spotting process in a predictable, manageable and descriptive manner. We hope it can provide a way to predict the incidents that can occur during a real cDNA microarray experiment, and produce useful data for several research applications involving cDNA microarrays.</p
Recommended from our members
Highly efficient separation of actinides from lanthanides by a phenanthroline-derived bis-triazine ligand
The synthesis, lanthanide complexation, and solvent ex- traction of actinide(III) and lanthanide(III) radiotracers from nitric acid solutions by a phenanthroline-derived quadridentate bis-triazine ligand are described. The ligand separates Am(III) and Cm(III) from the lanthanides with remarkably high efficiency, high selectivity, and fast extraction kinetics compared to its 2,2'-bipyridine counterpart. Structures of the 1:2 bis-complexes of the ligand with Eu(III) and Yb(III) were elucidated by X-ray crystallography and force field calculations, respec-tively. The Eu(III) bis-complex is the first 1:2 bis-complex of a quadridentate bis-triazine ligand to be characterized by crystallography. The faster rates of extraction were verified by kinetics measurements using the rotating membrane cell technique in several diluents. The improved kinetics of metal ion extraction are related to the higher surface activity of the ligand at the phase interface. The improvement in the ligand's properties on replacing the bipyridine unit with a phenanthroline unit far exceeds what was anticipated based on ligand design alone
Neuroendocrine tumors presenting with thyroid gland metastasis: a case series
<p>Abstract</p> <p>Introduction</p> <p>Autopsy series have shown that metastasis to the thyroid gland has occurred in up to 24% of patients who have died of cancer. Neuroendocrine tumors may metastasize to thyroid gland.</p> <p>Case presentations</p> <p>Case 1 was a 17-year-old Turkish woman who was referred from our Endocrinology Department for a thyroidectomy for treatment of neuroendocrine tumor metastasis. She was treated with a bilateral total thyroidectomy. Histopathological examination results were consistent with a neuroendocrine tumor; neoplastic cells showed strong immunoreactivity to chromogranin A and synaptophysin, but the immunohistochemical profile was inconsistent with medullary thyroid carcinoma in that the tumor was negative for calcitonin, carcinoembryonic antigen, and thyroid transcription factor-1.</p> <p>Case 2 was a 54-year-old Turkish woman who presented with a 3-cm nodule on her right thyroid lobe. She had undergone surgery for a right lung mass four years previously. After a right pneumonectomy, thymectomy and lymph node dissection, a typical carcinoid tumor was diagnosed. Under ultrasonographic guidance, fine needle aspiration biopsy of her right thyroid pole nodule was performed and the biopsy was compatible with a neuroendocrine tumor metastasis. She was treated with a bilateral total thyroidectomy. Histopathological examination indicated three nodular lesions, 5 cm and 0.4 cm in diameter in her right lobe and 0.1 cm in diameter in her left lobe. The tumors were consistent with a neuroendocrine phenotype, showing strong immunoreactivity to chromogranin A and synaptophysin.</p> <p>Conclusion</p> <p>Thyroid nodules detected during follow-up of neuroendocrine tumor patients should be thoroughly investigated. A fine needle aspiration biopsy of the thyroid confirms the diagnosis in most cases and leads to appropriate management of those patients and may prevent unnecessary treatment approaches.</p
Biomimetic transferable surface for a real time control over wettability and photoerasable writing with water drop lens
We demonstrate a transferable device that can turn wettability of surfaces to sticky or slippy, as per requirement. It is composed of polymeric yarn with a fibrous structure, which can be lifted and placed on any surface to render it the unique wettability properties. We introduce Polyvinylidenefluoride (PVDF) random fiber as biomimetic rose petal surface. When it is decorated with PVDF nanofibers yarns, the random mesh transform from rose petal sticky state into grass leaf slippy state. When it is placed on sticky, hydrophilic metal coin, it converts the surface of the coin to super hydrophobic. Adjustments in the yarn system, like interyarn spacing, can be done in real time to influence its wettability, which is a unique feature. Next, we load the polymer with a photochromic compound for chemical restructuring. It affects the sliding angle of water drop and makes the fibers optically active. We also demonstrate a “water droplets lens” concept that enables erasable writing on photochromic rose petal sticky fibrous surface. The droplet on a highly hydrophobic surface acts as a ball lens to concentrate light onto a hot spot; thereby we demonstrate UV light writing with water lenses and visible light erasing
Superhydrophobic Surface Based on a Coral-Like Hierarchical Structure of ZnO
Background: Fabrication of superhydrophobic surfaces has attracted much interest in the past decade. The fabrication methods that have been studied are chemical vapour deposition, the sol-gel method, etching technique, electrochemical deposition, the layer-by-layer deposition, and so on. Simple and inexpensive methods for manufacturing environmentally stable superhydrophobic surfaces have also been proposed lately. However, work referring to the influence of special structures on the wettability, such as hierarchical ZnO nanostructures, is rare. Methodology: This study presents a simple and reproducible method to fabricate a superhydrophobic surface with microscale roughness based on zinc oxide (ZnO) hierarchical structure, which is grown by the hydrothermal method with an alkaline aqueous solution. Coral-like structures of ZnO were fabricated on a glass substrate with a micro-scale roughness, while the antennas of the coral formed the nano-scale roughness. The fresh ZnO films exhibited excellent superhydrophilicity (the apparent contact angle for water droplet was about 0u), while the ability to be wet could be changed to superhydrophobicity after spin-coating Teflon (the apparent contact angle greater than 168u). The procedure reported here can be applied to substrates consisting of other materials and having various shapes. Results: The new process is convenient and environmentally friendly compared to conventional methods. Furthermore, the hierarchical structure generates the extraordinary solid/gas/liquid three-phase contact interface, which is the essentia
Source analysis of beta-synchronisation and cortico-muscular coherence after movement termination based on high resolution electroencephalography
We hypothesized that post-movement beta synchronization (PMBS) and cortico-muscular coherence (CMC) during movement termination relate to each other and have similar role in sensorimotor integration. We calculated the parameters and estimated the sources of these phenomena.We measured 64-channel EEG simultaneously with surface EMG of the right first dorsal interosseus muscle in 11 healthy volunteers. In Task1, subjects kept a medium-strength contraction continuously; in Task2, superimposed on this movement, they performed repetitive self-paced short contractions. In Task3 short contractions were executed alone. Time-frequency analysis of the EEG and CMC was performed with respect to the offset of brisk movements and averaged in each subject. Sources of PMBS and CMC were also calculated.High beta power in Task1, PMBS in Task2-3, and CMC in Task1-2 could be observed in the same individual frequency bands. While beta synchronization in Task1 and PMBS in Task2-3 appeared bilateral with contralateral predominance, CMC in Task1-2 was strictly a unilateral phenomenon; their main sources did not differ contralateral to the movement in the primary sensorimotor cortex in 7 of 11 subjects in Task1, and in 6 of 9 subjects in Task2. In Task2, CMC and PMBS had the same latency but their amplitudes did not correlate with each other. In Task2, weaker PMBS source was found bilaterally within the secondary sensory cortex, while the second source of CMC was detected in the premotor cortex, contralateral to the movement. In Task3, weaker sources of PMBS could be estimated in bilateral supplementary motor cortex and in the thalamus. PMBS and CMC appear simultaneously at the end of a phasic movement possibly suggesting similar antikinetic effects, but they may be separate processes with different active functions. Whereas PMBS seems to reset the supraspinal sensorimotor network, cortico-muscular coherence may represent the recalibration of cortico-motoneuronal and spinal systems
The Level of Knowledge and Behavior of Adolescent Male and Female Students in Turkey on the Matter of Reproductive Health
- …