The Chemical Evolution of the La0.6Sr0.4CoO3−δ Surface Under SOFC Operating Conditions and Its Implications for Electrochemical Oxygen Exchange Activity

© The Author(s) 2018Owing to its extraordinary high activity for catalysing the oxygen exchange reaction, strontium doped LaCoO3 (LSC) is one of the most promising materials for solid oxide fuel cell (SOFC) cathodes. However, under SOFC operating conditions this material suffers from performance degradation. This loss of electrochemical activity has been extensively studied in the past and an accumulation of strontium at the LSC surface has been shown to be responsible for most of the degradation effects. The present study sheds further light onto LSC surface changes also occurring under SOFC operating conditions. In-situ near ambient pressure X-ray photoelectron spectroscopy measurements were conducted at temperatures between 400 and 790 °C. Simultaneously, electrochemical impedance measurements were performed to characterise the catalytic activity of the LSC electrode surface for O2 reduction. This combination allowed a correlation of the loss in electro-catalytic activity with the appearance of an additional La-containing Sr-oxide species at the LSC surface. This additional Sr-oxide species preferentially covers electrochemically active Co sites at the surface, and thus very effectively decreases the oxygen exchange performance of LSC. Formation of precipitates, in contrast, was found to play a less important role for the electrochemical degradation of LSC.Fonds zur Förderung der wissenschaftlichen Forschung (FWF)212921411

Decoupling the refractive index from the electrical properties of transparent conducting oxides via periodic superlattices

We demonstrate an alternative approach to tuning the refractive index of materials. Current methodologies for tuning the refractive index of a material often result in undesirable changes to the structural or optoelectronic properties. By artificially layering a transparent conducting oxide with a lower refractive index material the overall film retains a desirable conductivity and mobility while acting optically as an effective medium with a modified refractive index. Calculations indicate that, with our refractive index change of 0.2, a significant reduction of reflective losses could be obtained by the utilisation of these structures in optoelectronic devices. Beyond this, periodic superlattice structures present a solution to decouple physical properties where the underlying electronic interaction is governed by different length scales

Residual stress in laser bent steel components

The kinetics of plastic deformation and microstructural evolution, and the residual stress in particular, were investigated on the steel plates (SABS 1431) bent by laser beam. The steel plates were bent by different number of laser scans and therefore, each was bent to a different extent. The stress results obtained by x-ray diffraction (sin2Ψ-method) show a higher compressive stress along the laser path than in the transverse direction. It was also found that stress relaxation occurs during multi-scan laser forming process and most importantly, that the stress is not significantly different in comparison to the stress, which initially existed in rolled steel plates. The metallographic analyses show that phase transformation, dynamic recovery and recrystallization processes occur during laser forming

Redox Behavior of Solid Solutions in the SrFe^1‐xCu^xO^3‐δ System for Application in Thermochemical Oxygen Storage and Air Separation

Perovskite oxides with temperature and oxygen partial pressure dependent non‐stoichiometry δ, such as SrFeO3‐δ or its Cu‐doped variants, can be applied as redox materials for two‐step thermochemical processes, i.e. to reversibly store oxygen and thereby thermal energy, or separate air using concentrated solar power. We studied the redox state of Cu in SrFe1‐xCuxO3‐δ samples using in‐situ X‐ray photoelectron spectroscopy (XPS) and X‐ray absorption (XAS) measurements in oxygen atmospheres using synchrotron radiation, and characterized these materials through thermogravimetric analysis. By this means, we show how spectroscopic and thermogravimetric data are correlated, suggesting that Cu and Fe are reduced simultaneously for x = 0.05, whereas the reduction of samples with x = 0.15 is mainly driven by a change in the Fe oxidation state. Furthermore, we studied the re‐oxidation kinetics of reduced SrFe1‐xCuxO3‐δ, revealing very high reaction speeds with t1/2=13 min at 150 °C for SrFeO3‐δ. Our results indicate that SrFe1‐xCuxO3‐δ solid solutions can be applied for oxygen storage and air separation with high capacity at relatively low temperatures, which allows an efficient thermochemical process