507 research outputs found
RF Characterization of Superconducting Samples
At CERN a compact Quadrupole Resonator has been re-commissioned for the RF characterization of superconducting materials at 400 MHz. In addition the resonator can also be excited at multiple integers of this frequency. Besides Rs it enables determination of the maximum RF magnetic field, the thermal conductivity and the penetration depth of the attached samples, at different temperatures. The features of the resonator will be compared with those of similar RF devices and first results will be presented
Extension of the Measurement Capabilities of the Quadrupole Resonator
The Quadrupole Resonator, designed to measure the surface resistance of
superconducting samples at 400 MHz has been refurbished. The accuracy of its
RF-DC compensation measurement technique is tested by an independent method. It
is shown that the device enables also measurements at 800 and 1200 MHz and is
capable to probe the critical RF magnetic field. The electric and magnetic
field configuration of the Quadrupole Resonator are dependent on the excited
mode. It is shown how this can be used to distinguish between electric and
magnetic losses.Comment: 6 pages, g figure
Symmetry-breaking thermally induced collapse of dipolar Bose-Einstein condensates
We investigate a Bose-Einstein condensate with additional long-range dipolar
interaction in a cylindrically symmetric trap within a variational framework.
Compared to the ground state of this system, little attention has as yet been
payed to its unstable excited states. For thermal excitations, however, the
latter is of great interest, because it forms the "activated complex" that
mediates the collapse of the condensate. For a certain value of the s-wave
scatting length our investigations reveal a bifurcation in the transition
state, leading to the emergence of two additional and symmetry-breaking excited
states. Because these are of lower energy than their symmetric counterpart, we
predict the occurrence of a symmetry-breaking thermally induced collapse of
dipolar condensates. We show that its occurrence crucially depends on the trap
geometry and calculate the thermal decay rates of the system within leading
order transition state theory with the help of a uniform rate formula near the
rank-2 saddle which allows to smoothly pass the bifurcation.Comment: 6 pages, 3 figure
Devices for SRF material characterization
The surface resistance R s of superconducting materials can be obtained by measuring the quality factor of an elliptical cavity excited in a transverse magnetic mode (TM010). The value obtained has however to be taken as averaged over the whole surface. A more convenient way to obtain R s, especially of materials which are not yet technologically ready for cavity production, is to measure small samples instead. These can be easily manufactured at low cost, duplicated and placed in film deposition and surface analytical tools. A commonly used design for a device to measure R s consists of a cylindrical cavity excited in a transverse electric (TE110) mode with the sample under test serving as one replaceable endplate. Such a cavity has two drawbacks. For reasonably small samples the resonant frequency will be larger than frequencies of interest concerning SRF application and it requires a reference sample of known R s. In this article we review several devices which have been designed to overcome these limitations, reaching sub-nΩ resolution in some cases. Some of these devices also comprise a parameter space in frequency and temperature which is inaccessible to standard cavity tests, making them ideal tools to test theoretical surface resistance models
Coaxial multi-mode cavities for fundamental SRF research in an unprecedented parameter space
Recent developments in superconducting radio-frequency (SRF) research have
focused primarily on high frequency elliptical cavities for electron
accelerators. Advances have been made in both reducing RF surface resistance
and pushing the readily achievable accelerating gradient by using novel SRF
cavity treatments including surface processing, custom heat treatments, and
flux expulsion. Despite the global demand for SRF based hadron accelerators,
the advancement of TEM mode cavities has lagged behind. To address this, two
purpose-built research cavities, one quarter-wave and one half-wave resonator,
have been designed and built to allow characterization of TEM-mode cavities
with standard and novel surface treatments. The cavities are intended as the
TEM mode equivalent to the 1.3GHz single cell cavity, which is the essential
tool for high frequency cavity research. Given their coaxial structure, the
cavities allow testing at the fundamental mode and higher harmonics, giving
unique insight into the role of RF frequency on fundamental loss mechanisms
from intrinsic and extrinsic sources. In this paper, the cavities and testing
infrastructure are described and the first performance measurements of both
cavities are presented
Superheating in coated niobium
Using muon spin rotation it is shown that the field of first flux penetration Hentry in Nb is enhanced by about 30% if coated with an overlayer of Nb3Sn or MgB2. This is consistent with an increase from the lower critical magnetic field Hc1 up to the superheating field Hsh of the Nb substrate. In the experiments presented here coatings of Nb3Sn and MgB2 with a thickness between 50 and 2000 nm have been tested. Hentry does not depend on material or thickness. This suggests that the energy barrier at the boundary between the two materials prevents flux entry up to Hsh of the substrate. A mechanism consistent with these findings is that the proximity effect recovers the stability of the energy barrier for flux penetration, which is suppressed by defects for uncoated samples. Additionally, a low temperature baked Nb sample has been tested. Here a 6% increase of Hentry was found, also pushing Hentry beyond Hc1
Transition state geometry of driven chemical reactions on time-dependent double-well potentials
Reaction rates across time-dependent barriers are difficult to define and difficult to obtain using standard transition state theory approaches because of the complexity of the geometry of the dividing surface separating reactants and products. Using perturbation theory (PT) or Lagrangian descriptors (LDs), we can obtain the transition state trajectory and the associated recrossing-free dividing surface. With the latter, we are able to determine the exact reactant population decay and the corresponding rates to benchmark the PT and LD approaches. Specifically, accurate rates are obtained from a local description regarding only direct barrier crossings and to those obtained from a stability analysis of the transition state trajectory. We find that these benchmarks agree with the PT and LD approaches for obtaining recrossing-free dividing surfaces. This result holds not only for the local dynamics in the vicinity of the barrier top, but also for the global dynamics of particles that are quenched at the reactant or product wells after their sojourn over the barrier region. The double-well structure of the potential allows for long-time dynamics related to collisions with the outside walls that lead to long-time returns in the low-friction regime. This additional global dynamics introduces slow-decay pathways that do not result from the local transition across the recrossing-free dividing surface associated with the transition state trajectory, but can be addressed if that structure is augmented by the population transfer of the long-time returns
Superconducting properties of PEO coatings containing MgB2 on niobium
A study has been carried out of superconductivity in coatings formed on niobium by plasma electrolytic oxidation (PEO) in an electrolyte containing different concentrations of MgB2. From preliminary experiments, a suitable PEO condition was selected. The coatings were examined by analytical scanning electron microscopy and X-ray diffraction. Superconductivity was assessed using magnetic moment-field measurements. At 6 K, superconductivity of the niobium dominated, which revealed strong flux pinning and sudden release. The latter was more gradual following PEO, indicating pinning was a surface effect. Between the critical temperature of niobium (9.25 K) and MgB2 (about 39 K), the diamagnetic behaviour of superconducting MgB2 was present, with earlier flux penetration the closer the temperature to 39 K. The hysteresis loop indicated stronger flux pinning for lower temperatures, as expected for a superconductor
A low energy muon spin rotation and point contact tunneling study of niobium films prepared for superconducting cavities
Point contact tunneling and low energy muon spin rotation are used to probe, on the same samples, the surface superconducting properties of micrometer thick niobium films deposited onto copper substrates using different sputtering techniques: diode, dc magnetron and HIPIMS. The combined results are compared to radio-frequency tests performances of RF cavities made with the same processes. Degraded surface superconducting properties are found to correlate to lower quality factors and stronger Q-slope. In addition, both techniques find evidence for surface paramagnetism on all samples and particularly on Nb films prepared by HIPIMS
- …