Microstructural and Corrosion Properties of Ti-to-Zr Dissimilar Alloy Joints Brazed with a Zr-Ti-Cu-Ni Amorphous Filler Alloy

Titanium and Zircaloy-4 dissimilar alloys were brazed with a zirconium-titanium-copper-nickel amorphous filler alloy, and the resulting joint structures as well as their corrosion properties were examined. The microstructure of the brazed joints was investigated according to brazing holding time at 850 degrees C, and the corrosion property was analyzed by potentiodynamic polarization. During brazing, joints were produced by diffusion-induced isothermal solidification of the molten filler alloy. At a relatively brief brazing holding time of 5 min, a large segregation zone consisting of an active alpha-phase and a nobler intermetallic phase was generated in the joint center, which suffered from micro-galvanic corrosion. The presence of alloyed titanium deteriorated the nobility of the alpha-zirconium phase near the joint and induced galvanic coupling with cathodic base metals, resulting in massive localized corrosion. This localized corrosion caused the pitting behavior at the applied potential of -51.1 similar to 187.5 mV during anodic polarization. With a brazing holding time of 20 min, the concentration of the alloying elements was homogenized to eliminate the electrochemical potential difference and minimize the galvanic corrosion susceptibility of the joint region. This homogeneous joint resulted in a highly passive corrosion behavior comparable to that of the titanium base metal

A High Capacity Calcium Primary Cell Based on the Ca–S System

Conversion reaction cells afford the ability to explore new energy storage paradigms that transcend the dogma of small, low‐charge cations essential to intercalative processes. Here we report the use of earth‐abundant and green calcium and sulfur in unprecedented conversion reaction Ca–S primary cells. Using S‐infiltrated mesoporous carbon (abbreviated S@meso‐C) cathodes, we achieve discharge capacities as high as 600 mAh g^(−1) (S basis) within the geometry Ca|Ca(ClO_4)_2/CH_3CN|S@meso‐C, at a discharge rate of C/3.5. The electrolyte system in the Ca–S battery is of paramount importance as the solid electrolyte interface (SEI) formed on the Ca anode limits the capacity and stability of the cell. We determine that 0.5 M Ca(ClO_4)_2 in CH_3CN forms an SEI that advantageously breaks down under anodic bias to allow oxidation of the anode. This same SEI, however, exhibits high impedance which increases over time at open circuit limiting the shelf life of the cell

A High Capacity Calcium Primary Cell Based on the Ca–S System

Conversion reaction cells afford the ability to explore new energy storage paradigms that transcend the dogma of small, low‐charge cations essential to intercalative processes. Here we report the use of earth‐abundant and green calcium and sulfur in unprecedented conversion reaction Ca–S primary cells. Using S‐infiltrated mesoporous carbon (abbreviated S@meso‐C) cathodes, we achieve discharge capacities as high as 600 mAh g^(−1) (S basis) within the geometry Ca|Ca(ClO_4)_2/CH_3CN|S@meso‐C, at a discharge rate of C/3.5. The electrolyte system in the Ca–S battery is of paramount importance as the solid electrolyte interface (SEI) formed on the Ca anode limits the capacity and stability of the cell. We determine that 0.5 M Ca(ClO_4)_2 in CH_3CN forms an SEI that advantageously breaks down under anodic bias to allow oxidation of the anode. This same SEI, however, exhibits high impedance which increases over time at open circuit limiting the shelf life of the cell

Towards Al3+-Induced Manganese-Containing Superoxide Dismutase Inactivation and Conformational Changes: An Integrating Study with Docking Simulations

Superoxide dismutase (SOD, EC 1.15.1.1) plays an important antioxidant defense role in skins exposed to oxygen. We studied the inhibitory effects of Al3+ on the activity and conformation of manganese-containing SOD (Mn-SOD). Mn-SOD was significantly inactivated by Al3+ in a dose-dependent manner. The kinetic studies showed that Al3+ inactivated Mn-SOD follows the first-order reaction. Al3+ increased the degree of secondary structure of Mn-SOD and also disrupted the tertiary structure of Mn-SOD, which directly resulted in enzyme inactivation. We further simulated the docking between Mn-SOD and Al3+ (binding energy for Dock 6.3: −14.07 kcal/mol) and suggested that ASP152 and GLU157 residues were predicted to interact with Al3+, which are not located in the Mn-contained active site. Our results provide insight into the inactivation of Mn-SOD during unfolding in the presence of Al3+ and allow us to describe a ligand binding via inhibition kinetics combined with the computational prediction

Bimodal Mesoporous Titanium Nitride/Carbon Microfibers as Efficient and Stable Electrocatalysts for Li–O_2 Batteries

The rechargeable Li–O_2 battery has been considered as a sustainable chemical power source for electric vehicles and grid energy storage systems due to the high theoretical specific energy (∼3500 Wh/kg). The practical performance of Li–O_2 batteries is, however, still far below expectations. This is mainly attributed to the (1) intrinsic sluggish reaction kinetics of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), (2) passivation of the electrodes by electrical isolation and pore blocking, and (3) chemical instability of the organic cell components, i.e., electrolyte, polymer binder, and carbon electrode, in the presence of O_2•– and Li_2O_2. It is crucial to develop highly porous, three-dimensional, conducting cathode catalyst/gas diffusion layer (GDL) architectures possessing superior catalytic activity and stability with respect to the ORR and the OER in order to address these issues. All of these requirements prompted us to examine the catalytic performance of porous framework metal nitride electrodes for Li–O_2 batteries

Pseudoaneurysm of the Medial Superior Genicular Artery after Arthroscopic Partial Meniscectomy

We describe a case of 43-year-old man who had a pseudoaneurysm of the medial superior genicular artery after arthroscopic partial meniscectomy with standard anterolateral and anteromedial portals. Pseudoaneurysm of the medial superior genicular artery has been reported at the previous superomedial portal site after arthroscopy. Described herein is a unique case that involved the medial superior genicular artery at the previous anteromedial portal site after arthroscopy. The pseudoaneurysm was successfully treated with transcatheter embolization

Sulfur infiltrated mesoporous graphene–silica composite as a polysulfide retaining cathode material for lithium–sulfur batteries

The lithium–sulfur (Li–S) system is an attractive candidate to replace the current state-of-the-art lithium-ion battery due to the promising theoretical charge capacity of 1675 mA h/g and energy density of 2500 Wh/kg; however, the dissolution of intermediate polysulfides into the organic liquid electrolyte during cycling hinders its practical realization. We report the synthesis of mesoporous graphene–silica composite (m-GS) as a supporting material of sulfur for Li–S batteries. The ordered porous silica structure was synthesized parallel to functionalized graphene sheets (FGSs) through the ternary cooperative assembly of the graphene, silica, and block copolymer precursors. The well-defined, unique mesoporous structure integrates the electronic conductivity of graphene and the dual functions of silica as a structure building block and in situ polysulfide ab-/ad-sorbing agent to give a Li–S battery that has both good retention ability of polysulfides and good rate capability

3D garment digitisation for virtual wardrobe using a commodity depth sensor

5-Aminovaleric acid (5AVA) is an important five-carbon platform chemical that can be used for the synthesis of polymers and other chemicals of industrial interest. Enzymatic conversion of L-lysine to 5AVA has been achieved by employing lysine 2-monooxygenase encoded by the davB gene and 5-aminovaleramidase encoded by the davA gene. Additionally, a recombinant Escherichia coli strain expressing the davB and davA genes has been developed for bioconversion of L-lysine to 5AVA. To use glucose and xylose derived from lignocellulosic biomass as substrates, rather than L-lysine as a substrate, we previously examined direct fermentative production of 5AVA from glucose by metabolically engineered E. coli strains. However, the yield and productivity of 5AVA achieved by recombinant E. coli strains remain very low. Thus, Corynebacterium glutamicum, a highly efficient L-lysine producing microorganism, should be useful in the development of direct fermentative production of 5AVA using L-lysine as a precursor for 5AVA. Here, we report the development of metabolically engineered C. glutamicum strains for enhanced fermentative production of 5AVA from glucose.Various expression vectors containing different promoters and origins of replication were examined for optimal expression of Pseudomonas putida davB and davA genes encoding lysine 2-monooxygenase and delta-aminovaleramidase, respectively. Among them, expression of the C. glutamicum codon-optimized davA gene fused with His-Tag at its N-Terminal and the davB gene as an operon under a strong synthetic H promoter (plasmid p36davAB3) in C. glutamicum enabled the most efficient production of 5AVA. Flask culture and fed-batch culture of this strain produced 6.9 and 19.7\ua0g/L (together with 11.9\ua0g/L glutaric acid as major byproduct) of 5AVA, respectively. Homology modeling suggested that endogenous gamma-aminobutyrate aminotransferase encoded by the gabT gene might be responsible for the conversion of 5AVA to glutaric acid in recombinant C. glutamicum. Fed-batch culture of a C. glutamicum gabT mutant-harboring p36davAB3 produced 33.1\ua0g/L 5AVA with much reduced (2.0\ua0g/L) production of glutaric acid.Corynebacterium glutamicum was successfully engineered to produce 5AVA from glucose by optimizing the expression of two key enzymes, lysine 2-monooxygenase and delta-aminovaleramidase. In addition, production of glutaric acid, a major byproduct, was significantly reduced by employing C. glutamicum gabT mutant as a host strain. The metabolically engineered C. glutamicum strains developed in this study should be useful for enhanced fermentative production of the novel C5 platform chemical 5AVA from renewable resources

Sulfur-Functionalized Mesoporous Carbons as Sulfur Hosts in Li–S Batteries: Increasing the Affinity of Polysulfide Intermediates to Enhance Performance

The Li–S system offers a tantalizing battery for electric vehicles and renewable energy storage due to its high theoretical capacity of 1675 mAh g^(–1) and its employment of abundant and available materials. One major challenge in this system stems from the formation of soluble polysulfides during the reduction of S_8, the active cathode material, during discharge. The ability to deploy this system hinges on the ability to control the behavior of these polysulfides by containing them in the cathode and allowing for further redox. Here, we exploit the high surface areas and good electrical conductivity of mesoporous carbons (MC) to achieve high sulfur utilization while functionalizing the MC with sulfur (S–MC) in order to modify the surface chemistry and attract polysulfides to the carbon material. S–MC materials show enhanced capacity and cyclability trending as a function of sulfur functionality, specifically a 50% enhancement in discharge capacity is observed at high cycles (60–100 cycles). Impedance spectroscopy suggests that the S-MC materials exhibit a lower charge-transfer resistance compared with MC materials which allows for more efficient electrochemistry with species in solution at the cathode. Isothermal titration calorimetry shows that the change in surface chemistry from unfunctionalized to S-functionalized carbons results in an increased affinity of the polysulfide intermediates for the S–MC materials, which is the likely cause for enhanced cyclability