9 research outputs found
Sistema electrònic pel control remot de fonts d’il·luminació là ser
Aquest Projecte té la finalitat de proporcionar valor afegit als productes
de l’empresa Monocrom S.L., situada a Vilanova i la Geltrú. Aquesta
empresa es dedica des de fa 20 anys a la fabricaciĂł de lĂ sers.
El projecte consta del disseny, fabricació i programació d’un sistema
electrònic que permeti una comunicació entre el driver de qualsevol
là ser de Monocrom amb l’usuari. Aquesta comunicació es realitzarà a
través d’un bus USB i el PIC18F4550.
El disseny, realitzat Ăntegrament a Monocrom, s’ha desenvolupat per
mitjĂ del software PCAD-2006.
La fabricació s’ha subcontractat a una tercera empresa, situada a Santa
Maria de Palautordera, amb la qual, Monocrom té una llarga i estreta
relaciĂł.
La programació del uC PIC18F4550 s’ha realitzat en codi C, i programat
amb el MPLAB.
Finalment, amb la placa fabricada, muntada, verificada i el uC
programat, s’ha realitzat unes proves que permetin mostrar el correcte
funcionament del sistema electrònic.
Les conclusions finals es basen en la millora del producte ofert per
Monocrom S.L
Optical power model of a laser bar diode
This article proposes a modelling method for laser diodes optical output power including its dependency on temperature. The device used for this study is a 40 W Monocrom's diode, with 808 nm wavelength emitted light and with a 19 emitters CS mount laser bar, mounted using the patented Monocrom's clamping method. The aim of this study is to propose a Pspice modelling of the laser diode device, mainly focusing in the optical output power variation with the temperature and allowing its computer simulation. Also to setup a characterization system to obtain the necessary parameters values for the optical model mathematical expressions. Therefore, the article explains the proposed method for the optical output power model generation of the laser bar diode and how its parameters values are obtained, an optical output power measurement setup and its calibration, the obtained Pspice model and its simulation, and the characterization system that allows to obtain the necessary parameters with short rise up time current slopes. Finally, evaluation of results and related conclusions are exposed.Peer ReviewedPostprint (author's final draft
Laser diodes optical output power model
This article proposes a modelling method of laser diodes optical output power, especially for mid-high power diodes working in continuous wave (CW) or quasi continuous wave (QCW) modes, and focusing in the optical output power dependency on temperature and its model implementation in Pspice, targeting its computer simulation. It is commented the theory and related mathematical expressions used in the model, the Pspice program model and the purpose of its different parts, and how mathematical expressions are introduced in it. It is proposed a diodes optical output power response characterization method using an automatic data acquisition system to obtain diodes response curve avoiding temperature effects during the measurements. Implementation example of the modelling and characterization method in a laser diode, model results versus real measurements comparison and related conclusions are exposed.Peer ReviewedPreprin
Tècniques de control là ser aplicades a LEDs d'alta potència
Si anem passejant pel carrer, de vacances en cotxe, quan ens
truquen al mòbil o simplement, quan canviem de canal de la
televisió, ens trobem la tecnologia LED. Cada cop més aquestes
“petites bombetes” van envaint el nostre quotidià . En la nostra rutina
diĂ ria hi ha LEDs per tot arreu, als semĂ fors, als cotxes, a les
agendes electròniques...
Aquest projecte pretén estudiar la viabilitat de controlar LEDs d’alta
potència, amb tècniques de control Là ser, aprofitant els
coneixements que he adquirit a l’empresa vilanovina, Monocrom S.L.
En aquesta memòria hi ha descrit tot el desenvolupament del
projecte. Hi ha descrits els dissenys electrònics, totes les proves
realitzades per tal de comprovar el funcionament del control i dels
LEDs, i finalment els resultats de les mesures fetes.
Amb els resultats a la mà , es creu oportú ampliar l’estudi per tal de
delimitar els usos i aplicacions dels LEDs en el camp de la
il·luminació
Sistema electrònic pel control remot de fonts d’il·luminació là ser
Aquest Projecte té la finalitat de proporcionar valor afegit als productes
de l’empresa Monocrom S.L., situada a Vilanova i la Geltrú. Aquesta
empresa es dedica des de fa 20 anys a la fabricaciĂł de lĂ sers.
El projecte consta del disseny, fabricació i programació d’un sistema
electrònic que permeti una comunicació entre el driver de qualsevol
là ser de Monocrom amb l’usuari. Aquesta comunicació es realitzarà a
través d’un bus USB i el PIC18F4550.
El disseny, realitzat Ăntegrament a Monocrom, s’ha desenvolupat per
mitjĂ del software PCAD-2006.
La fabricació s’ha subcontractat a una tercera empresa, situada a Santa
Maria de Palautordera, amb la qual, Monocrom té una llarga i estreta
relaciĂł.
La programació del uC PIC18F4550 s’ha realitzat en codi C, i programat
amb el MPLAB.
Finalment, amb la placa fabricada, muntada, verificada i el uC
programat, s’ha realitzat unes proves que permetin mostrar el correcte
funcionament del sistema electrònic.
Les conclusions finals es basen en la millora del producte ofert per
Monocrom S.L
Laser diodes optical output power model
This article proposes a modelling method of laser diodes optical output power, especially for mid-high power diodes working in continuous wave (CW) or quasi continuous wave (QCW) modes, and focusing in the optical output power dependency on temperature and its model implementation in Pspice, targeting its computer simulation. It is commented the theory and related mathematical expressions used in the model, the Pspice program model and the purpose of its different parts, and how mathematical expressions are introduced in it. It is proposed a diodes optical output power response characterization method using an automatic data acquisition system to obtain diodes response curve avoiding temperature effects during the measurements. Implementation example of the modelling and characterization method in a laser diode, model results versus real measurements comparison and related conclusions are exposed.Peer Reviewe
Optical power model for low power laser diodes : Pspice modelling of optical power variation with temperature
In this article a method for modelling optical power's variation with the temperature for low power laser diodes and its implementation in Pspice is proposed. Also the measurement method and used instrumentation setup for the necessary data acquisition are explained. Model is implemented, and simulation results and real measurements are compared for model validation in case of a low power laser diode (SLD1121VS).Peer ReviewedPostprint (published version
Optical power model of a laser bar diode
This article proposes a modelling method for laser diodes optical output power including its dependency on temperature. The device used for this study is a 40 W Monocrom's diode, with 808 nm wavelength emitted light and with a 19 emitters CS mount laser bar, mounted using the patented Monocrom's clamping method. The aim of this study is to propose a Pspice modelling of the laser diode device, mainly focusing in the optical output power variation with the temperature and allowing its computer simulation. Also to setup a characterization system to obtain the necessary parameters values for the optical model mathematical expressions. Therefore, the article explains the proposed method for the optical output power model generation of the laser bar diode and how its parameters values are obtained, an optical output power measurement setup and its calibration, the obtained Pspice model and its simulation, and the characterization system that allows to obtain the necessary parameters with short rise up time current slopes. Finally, evaluation of results and related conclusions are exposed.Peer Reviewe
Optical power model for low power laser diodes : Pspice modelling of optical power variation with temperature
In this article a method for modelling optical power's variation with the temperature for low power laser diodes and its implementation in Pspice is proposed. Also the measurement method and used instrumentation setup for the necessary data acquisition are explained. Model is implemented, and simulation results and real measurements are compared for model validation in case of a low power laser diode (SLD1121VS).Peer Reviewe