99 research outputs found
The Murchison Widefield Array: Design Overview
The Murchison Widefield Array (MWA) is a dipole-based aperture array
synthesis telescope designed to operate in the 80-300 MHz frequency range. It
is capable of a wide range of science investigations, but is initially focused
on three key science projects. These are detection and characterization of
3-dimensional brightness temperature fluctuations in the 21cm line of neutral
hydrogen during the Epoch of Reionization (EoR) at redshifts from 6 to 10,
solar imaging and remote sensing of the inner heliosphere via propagation
effects on signals from distant background sources,and high-sensitivity
exploration of the variable radio sky. The array design features 8192
dual-polarization broad-band active dipoles, arranged into 512 tiles comprising
16 dipoles each. The tiles are quasi-randomly distributed over an aperture
1.5km in diameter, with a small number of outliers extending to 3km. All
tile-tile baselines are correlated in custom FPGA-based hardware, yielding a
Nyquist-sampled instantaneous monochromatic uv coverage and unprecedented point
spread function (PSF) quality. The correlated data are calibrated in real time
using novel position-dependent self-calibration algorithms. The array is
located in the Murchison region of outback Western Australia. This region is
characterized by extremely low population density and a superbly radio-quiet
environment,allowing full exploitation of the instrumental capabilities.Comment: 9 pages, 5 figures, 1 table. Accepted for publication in Proceedings
of the IEE
Study of redshifted H I from the epoch of reionization with drift scan
The detection of the Epoch of Reionization (EoR) in the redshifted 21-cm line is a challenging task. Here we formulate the detection of the EoR signal using the drift scan strategy. This method potentially has better instrumental stability as compared to the case where a single patch of sky is tracked. We demonstrate that the correlation time between measured visibilities could extend up to 1-2 hr for an interferometer array such as the Murchison Widefield Array (MWA), which has a wide primary beam. We estimate the EoR power based on cross-correlation of visibilities across time and show that the drift scan strategy is capable of the detection of the EoR signal with comparable/better signal-to-noise as compared to the tracking case. We also estimate the visibility correlation for a set of bright point sources and argue that the statistical inhomogeneity of bright point sources might allow their separation from the EoR signal
Serendipitous discovery of a dying Giant Radio Galaxy associated with NGC 1534, using the Murchison Widefield Array
This article has been accepted for publication in Monthly Notices of the Royal Astronomical Society. © 2015 The Authors. Published by Oxford University Press on behalf of the Royal Astronomical Society.Recent observations with the Murchison Widefield Array at 185~MHz have serendipitously unveiled a heretofore unknown giant and relatively nearby () radio galaxy associated with NGC\,1534. The diffuse emission presented here is the first indication that NGC\,1534 is one of a rare class of objects (along with NGC\,5128 and NGC\,612) in which a galaxy with a prominent dust lane hosts radio emission on scales of 700\,kpc. We present details of the radio emission along with a detailed comparison with other radio galaxies with disks. NGC1534 is the lowest surface brightness radio galaxy known with an estimated scaled 1.4-GHz surface brightness of just 0.2\,mJy\,arcmin. The radio lobes have one of the steepest spectral indices yet observed: , and the core to lobe luminosity ratio is $Peer reviewe
Low-Frequency Observations of the Moon with the Murchison Widefield Array
A new generation of low-frequency radio telescopes is seeking to observe the redshifted 21 cm signal from the epoch of reionization (EoR), requiring innovative methods of calibration and imaging to overcome the difficulties of wide-field low-frequency radio interferometry. Precise calibration will be required to separate the expected small EoR signal from the strong foreground emission at the frequencies of interest between 80 and 300 MHz. The Moon may be useful as a calibration source for detection of the EoR signature, as it should have a smooth and predictable thermal spectrum across the frequency band of interest. Initial observations of the Moon with the Murchison Widefield Array 32 tile prototype show that the Moon does exhibit a similar trend to that expected for a cool thermally emitting body in the observed frequency range, but that the spectrum is corrupted by reflected radio emission from Earth. In particular, there is an abrupt increase in the observed flux density of the Moon within the internationally recognized frequency modulated (FM) radio band. The observations have implications for future low-frequency surveys and EoR detection experiments that will need to take this reflected emission from the Moon into account. The results also allow us to estimate the equivalent isotropic power emitted by the Earth in the FM band and to determine how bright the Earth might appear at meter wavelengths to an observer beyond our own solar system
First spectroscopic imaging observations of the sun at low radio frequencies with the Murchison Widefield Array Prototype
We present the first spectroscopic images of solar radio transients from the prototype for the Murchison Widefield Array, observed on 2010 March 27. Our observations span the instantaneous frequency band 170.9- 201.6 MHz. Though our observing period is characterized as a period of "low" to "medium" activity, one broadband emission feature and numerous short-lived, narrowband, non-thermal emission features are evident. Our data represent a significant advance in low radio frequency solar imaging, enabling us to follow the spatial, spectral, and temporal evolution of events simultaneously and in unprecedented detail. The rich variety of features seen here reaffirms the coronal diagnostic capability of low radio frequency emission and provides an early glimpse of the nature of radio observations that will become available as the next generation of low-frequency radio interferometers come online over the next few years
What does an interferometer really measure? Including instrument and data characteristics in the reconstruction of the 21cm power spectrum
Combining the visibilities measured by an interferometer to form a
cosmological power spectrum is a complicated process in which the window
functions play a crucial role. In a delay-based analysis, the mapping between
instrumental space, made of per-baseline delay spectra, and cosmological space
is not a one-to-one relation. Instead, neighbouring modes contribute to the
power measured at one point, with their respective contributions encoded in the
window functions. To better understand the power spectrum measured by an
interferometer, we assess the impact of instrument characteristics and analysis
choices on the estimator by deriving its exact window functions, outside of the
delay approximation. Focusing on HERA as a case study, we find that
observations made with long baselines tend to correspond to enhanced low-k
tails of the window functions, which facilitate foreground leakage outside the
wedge, whilst the choice of bandwidth and frequency taper can help narrow them
down. With the help of simple test cases and more realistic visibility
simulations, we show that, apart from tracing mode mixing, the window functions
can accurately reconstruct the power spectrum estimator of simulated
visibilities. We note that the window functions depend strongly on the
chromaticity of the beam, and less on its spatial structure - a Gaussian
approximation, ignoring side lobes, is sufficient. Finally, we investigate the
potential of asymmetric window functions, down-weighting the contribution of
low-k power to avoid foreground leakage. The window functions presented in this
work correspond to the latest HERA upper limits for the full Phase I data. They
allow an accurate reconstruction of the power spectrum measured by the
instrument and can be used in future analyses to confront theoretical models
and data directly in cylindrical space.Comment: 18 pages, 18 figures, submitted to MNRAS. Comments welcome
Characterization Of Inpaint Residuals In Interferometric Measurements of the Epoch Of Reionization
Radio Frequency Interference (RFI) is one of the systematic challenges
preventing 21cm interferometric instruments from detecting the Epoch of
Reionization. To mitigate the effects of RFI on data analysis pipelines,
numerous inpaint techniques have been developed to restore RFI corrupted data.
We examine the qualitative and quantitative errors introduced into the
visibilities and power spectrum due to inpainting. We perform our analysis on
simulated data as well as real data from the Hydrogen Epoch of Reionization
Array (HERA) Phase 1 upper limits. We also introduce a convolutional neural
network that capable of inpainting RFI corrupted data in interferometric
instruments. We train our network on simulated data and show that our network
is capable at inpainting real data without requiring to be retrained. We find
that techniques that incorporate high wavenumbers in delay space in their
modeling are best suited for inpainting over narrowband RFI. We also show that
with our fiducial parameters Discrete Prolate Spheroidal Sequences (DPSS) and
CLEAN provide the best performance for intermittent ``narrowband'' RFI while
Gaussian Progress Regression (GPR) and Least Squares Spectral Analysis (LSSA)
provide the best performance for larger RFI gaps. However we caution that these
qualitative conclusions are sensitive to the chosen hyperparameters of each
inpainting technique. We find these results to be consistent in both simulated
and real visibilities. We show that all inpainting techniques reliably
reproduce foreground dominated modes in the power spectrum. Since the
inpainting techniques should not be capable of reproducing noise realizations,
we find that the largest errors occur in the noise dominated delay modes. We
show that in the future, as the noise level of the data comes down, CLEAN and
DPSS are most capable of reproducing the fine frequency structure in the
visibilities of HERA data.Comment: 26 pages, 18 figure
Direct Optimal Mapping Image Power Spectrum and its Window Functions
The key to detecting neutral hydrogen during the epoch of reionization (EoR)
is to separate the cosmological signal from the dominating foreground
radiation. We developed direct optimal mapping (Xu et al. 2022) to map
interferometric visibilities; it contains only linear operations, with full
knowledge of point spread functions from visibilities to images. Here we
present an FFT-based image power spectrum and its window functions based on
direct optimal mapping. We use noiseless simulation, based on the Hydrogen
Epoch of Reionization Array (HERA) Phase I configuration, to study the image
power spectrum properties. The window functions show power leakage
from the foreground-dominated region into the EoR window; the 2D and 1D power
spectra also verify the separation between the foregrounds and the EoR.
Furthermore, we simulated visibilities from a -complete array and
calculated its image power spectrum. The result shows that the foreground--EoR
leakage is further suppressed below , dominated by the tapering
function sidelobes; the 2D power spectrum does not show signs of the horizon
wedge. The -complete result provides a reference case for future 21cm
cosmology array designs.Comment: Submitted to Ap
Direct Optimal Mapping for 21cm Cosmology: A Demonstration with the Hydrogen Epoch of Reionization Array
Motivated by the desire for wide-field images with well-defined statistical
properties for 21cm cosmology, we implement an optimal mapping pipeline that
computes a maximum likelihood estimator for the sky using the interferometric
measurement equation. We demonstrate this direct optimal mapping with data from
the Hydrogen Epoch of Reionization (HERA) Phase I observations. After
validating the pipeline with simulated data, we develop a maximum likelihood
figure-of-merit for comparing four sky models at 166MHz with a bandwidth of
100kHz. The HERA data agree with the GLEAM catalogs to <10%. After subtracting
the GLEAM point sources, the HERA data discriminate between the different
continuum sky models, providing most support for the model of Byrne et al.
2021. We report the computation cost for mapping the HERA Phase I data and
project the computation for the HERA 320-antenna data; both are feasible with a
modern server. The algorithm is broadly applicable to other interferometers and
is valid for wide-field and non-coplanar arrays.Comment: 16 pages, 10 figures, 2 tables, published on Ap
- …