Marriage, Specialization, and the Gender Division of Labor

A customary gender division of labor is one in which women and men are directed towards certain tasks and/or explicitly prohibited from performing others. We offer an explanation as to why the gender division of labor is so often enforced by custom, and why customary gender divisions of labor generally involve both direction and prohibition. Our model builds on the literature on the marital hold-up problem, and considers both problems in choice of specialty and human capital acquisition in a framework in which agents learn a variety of skills and must search for a marriage partner on the marriage market. We show that wasteful behavior may emerge due to strategic incentives in career choice and human capital acquisition, and that both problems may be mitigated through the customary gender division of labor. We find, however, that a gender division of labor is not Pareto-improving; one gender is made worse off. Both the distributional effects and welfare gains to a customary gender division of labor decrease as opportunities to exchange in markets increase.

A Human Capital-Based Theory of Post Marital Residence Rules

In pre-modern societies the residence of a newly-wedded couple is often decided by custom. We formulate a theory of optimal post-marital residence rules based on contracting problems created by the nature of pre-marriage human capital investments. We argue that a fixed post-marital residence rule may mitigate a hold-up problem by specifying marriage terms and limiting possibilities for renegotiation; the trade-off is that the rule may prohibit beneficial renegotiation of post-marital location. A point of interest of our approach is that the magnitude and direction of transfers accompanying marriage are endogenous. We apply our theoretical results to understanding cross-cultural post-marital residence patters. We find some predictive ability in variables related to outside options, control over the environment, and potential degree of social control.Marriage, Bargaining, Hold-up Problem, Dowry, Bride-Price

A Human Capital-Based Theory of Post-Marital Residence Rules

In pre-modern societies the residence of a newly-wedded couple is often decided by custom. While researchers have analyzed factors leading to particular post-marital residence patterns, no one has explained why a society should have a customary rule in the first place. Our theory stems from contracting problems created by the nature of pre-marriage human capital investments. We argue that a fixed post-marital residence rule may solve a hold-up problem by specifying marriage terms and limiting possibilities for renegotiation; the trade-off is the rule may prohibit beneficial renegotiation of post-marital location. We compare alternative residence rules (or lack thereof) under different degrees of location specificity of human capital and environmental uncertainty. We apply our theoretical results to Murdock's (1967) 862-society data set, augmented with climate data. We find some predictive ability in variables related to outside options, control over the environment, and potential degree of social control.

Marriage, Specialization, and the Gender Division of Labor

A customary gender division of labor is one in which women and men are directed towards certain tasks and/or explicitly prohibited from performing others. We offer an explanation as to why the gender division of labor is so often enforced by custom, and why customary gender divisions of labor generally involve both direction and prohibition. Our model builds on the literature on the marital hold-up problem, and considers both problems in choice of specialty and human capital acquisition in a framework in which agents learn a variety of skills and then enter the marriage market. We show that wasteful behavior may emerge due to strategic incentives in career choice and human capital acquisition, and that both problems may be mitigated through the customary gender division of labor. We find, however, that a gender division of labor is not Pareto-improving; one gender is made worse off. Both the distributional effects and welfare gains of a customary gender division of labor decrease as opportunities to exchange in markets increase.earnings inequality, income inequality, gender, race, and ethnicity differences

Hydrogen environment embrittlement of astroloy and Udimet 700 (nickel-base) and V-57 (iron-base) superalloys

The sensitivity to hydrogen environment embrittlement of three superalloys was determined. Astroloy forgings were resistant to embrittlement during smooth tensile, notched tensile, and creep testing in 3.5-MN/sq m hydrogen over the range 23 to 760 C. The notched tensile strength of Udimet 700 bar stock in hydrogen at 23 C was only 50 percent of the baseline value in helium. Forgings of V-57 were not significantly embrittled by hydrogen during smooth tensile testing over the range 23 to 675 C; creep and rupture lives of V-57 were degraded by hydrogen. Postcreep tensile ductility of V-57 was reduced by 40 percent after creep exposure in hydrogen

Oil film measurement in polytetrafluoroethylene-faced thrust pad bearings for hydrogenerator applications

There is a growing trend in the replacement of the babbit facing in thrust pad bearings with a composite polytetrafluoroethylene (PTFE) surface layer. The PTFE-faced bearings have been shown to allow a greater specific pressure, reduce thermal crowning, and, in some cases, negate the need for an oil-lift (jacking) system. These designs of bearing require new methods for the measurement of oil film thickness both to assist in their development and for plant condition monitoring. In this work, an ultrasonic method of oil film measurement is evaluated for this purpose. An ultrasonic transducer is mounted on the back face of the thrust pad. Pulses are generated and transmitted through the pad material, bonding interlayer, and PTFE surface layer. The proportion of the wave that reflects back from the oil film layer is determined. This is then related to the oil film thickness using a series of calibration experiments and a spring stiffness model. In practice, the reflected signal is difficult to distinguish, in the time domain, from other internal reflections from the pad. Signals are compared with reflections when no oil film is present and processing is carried out in the frequency domain. Experiments have been performed on a full size PTFE-faced thrust pad destined for a hydroelectric power station turbine. The instrumented pad was installed in a test facility and subjected to a range of loading conditions both with and without oil lift. Although there were some problems with the robustness of the experimental procedure, oil films were successfully measured and used to study the effect of the oil-lift system on film formation. © IMechE 2006

Supersymmetry of Noncompact MQCD-like Membrane Instantons and Heat Kernel Asymptotics

We perform a heat kernel asymptotics analysis of the nonperturbative superpotential obtained from wrapping of an M2-brane around a supersymmetric noncompact three-fold embedded in a (noncompact) G_2-manifold as obtained in [1], the three-fold being the one relevant to domain walls in Witten's MQCD [2], in the limit of small "zeta", a complex constant that appears in the Riemann surfaces relevant to defining the boundary conditions for the domain wall in MQCD. The MQCD-like configuration is interpretable, for small but non-zero zeta as a noncompact/"large" open membrane instanton, and for vanishing zeta, as the type IIA D0-brane (for vanishing M-theory cicle radius). We find that the eta-function Seeley de-Witt coefficients vanish, and we get a perfect match between the zeta-function Seeley de-Witt coefficients (up to terms quadratic in zeta) between the Dirac-type operator and one of the two Laplace-type operators figuring in the superpotential. This is an extremely strong signature of residual supersymmetry for the nonperturbative configurations in M-theory considered in this work.Comment: 21 pages, LaTeX; v3: several clarifying remarks added, to appear in JHE

A structural systematic study of three isomers of difluoro-N-(4-pyridyl)benzamide

The isomers 2,3-, (I), 2,4-, (II), and 2,5-difluoro-N-(4-pyridyl)benzamide, (III), all with formula C₁₂H₈F₂N₂O, all exhibit intramolecular C-H...O=C and N-H...F contacts [both with S(6) motifs]. In (I), intermolecular N-H...O=C interactions form one-dimensional chains along [010] [N...O = 3.0181 (16) Å], with weaker C-H...N interactions linking the chains into sheets parallel to the [001] plane, further linked into pairs via C-H...F contacts about inversion centres; a three-dimensional herring-bone network forms via C-H...π(py) (py is pyridyl) interactions. In (II), weak aromatic C-H...N(py) interactions form one-dimensional zigzag chains along [001]; no other interactions with H...N/O/F < 2.50 Å are present, apart from long N/C-H...O=C and C-H...F contacts. In (III), N-H...N(py) interactions form one-dimensional zigzag chains [as C(6) chains] along [010] augmented by a myriad of weak C-H...π(arene) and O=C...O=C interactions and C-H...O/N/F contacts. Compound (III) is isomorphous with the parent N-(4-pyridyl)benzamide [Noveron, Lah, Del Sesto, Arif, Miller & Stang (2002). J. Am. Chem. Soc. 124, 6613-6625] and the three 2/3/4-fluoro-N-(4-pyridyl)benzamides [Donnelly, Gallagher & Lough (2008). Acta Cryst. C64, o335-o340]. The study expands our series of fluoro(pyridyl)benzamides and augments our understanding of the competition between strong hydrogen-bond formation and weaker influences on crystal packing

A structural systematic study of four isomers of difluoro-N-(3-pyridyl)benzamide

The four isomers 2,4-, (I), 2,5-, (II), 3,4-, (III), and 3,5-difluoro-N-(3-pyridyl)benzamide, (IV), all with formula C12H8F2N2O, display molecular similarity, with interplanar angles between the C6/C5N rings ranging from 2.94 (11)° in (IV) to 4.48 (18)° in (I), although the amide group is twisted from either plane by 18.0 (2)-27.3 (3)°. Compounds (I) and (II) are isostructural but are not isomorphous. Intermolecular N-H...O=C interactions form one-dimensional C(4) chains along [010]. The only other significant interaction is C-H...F. The pyridyl (py) N atom does not participate in hydrogen bonding; the closest H...Npy contact is 2.71 Å in (I) and 2.69 Å in (II). Packing of pairs of one-dimensional chains in a herring-bone fashion occurs via [pi]-stacking interactions. Compounds (III) and (IV) are essentially isomorphous (their a and b unit-cell lengths differ by 9%, due mainly to 3,4-F2 and 3,5-F2 substitution patterns in the arene ring) and are quasi-isostructural. In (III), benzene rotational disorder is present, with the meta F atom occupying both 3- and 5-F positions with site occupancies of 0.809 (4) and 0.191 (4), respectively. The N-H...Npy intermolecular interactions dominate as C(5) chains in tandem with C-H...Npy interactions. C-H...O=C interactions form R22(8) rings about inversion centres, and there are [pi]-[pi] stacks about inversion centres, all combining to form a three-dimensional network. By contrast, (IV) has no strong hydrogen bonds; the N-H...Npy interaction is 0.3 Å longer than in (III). The carbonyl O atom participates only in weak interactions and is surrounded in a square-pyramidal contact geometry with two intramolecular and three intermolecular C-H...O=C interactions. Compounds (III) and (IV) are interesting examples of two isomers with similar unit-cell parameters and gross packing but which display quite different intermolecular interactions at the primary level due to subtle packing differences at the atom/group/ring level arising from differences in the peripheral ring-substitution patterns