DIRDOP: a directivity approach to determining the seismic rupture velocity vector

Directivity effects are a characteristic of seismic source finiteness and are a consequence of the rupture spread in preferential directions. These effects are manifested through seismic spectral deviations as a function of the observation location. The directivity by Doppler effect method permits estimation of the directions and rupture velocities, beginning from the duration of common pulses, which are identified in waveforms or relative source time functions. The general model of directivity that supports the method presented here is a Doppler analysis based on a kinematic source model of rupture (Haskell, Bull Seismol Soc Am 54:1811–1841, 1964) and a structural medium with spherical symmetry. To evaluate its performance, we subjected the method to a series of tests with synthetic data obtained from ten typical seismic ruptures. The experimental conditions studied correspond with scenarios of simple and complex, unilaterally and bilaterally extended ruptures with different mechanisms and datasets with different levels of azimuthal coverage. The obtained results generally agree with the expected values. We also present four real case studies, applying the method to the following earthquakes: Arequipa, Peru (Mw = 8.4, June 23, 2001); Denali, AK, USA (Mw = 7.8; November 3, 2002); Zemmouri– Boumerdes, Algeria (Mw = 6.8, May 21, 2003); and Sumatra, Indonesia (Mw = 9.3, December 26, 2004). The results obtained from the dataset of the four earthquakes agreed, in general, with the values presented by other authors using different methods and data

Economy and Environmental Problems in the Mexican Coastal States

A canonical correspondence analysis (CCA) for environmental and economic variables was performed for 17 Mexican coastal states. The ordination method allowed us to identify three groups, namely hydroelectric energy generation (I), pollution (II) and harbours (III), which were associated to different human activities. Furthermore, CCA is efficient to help us generate hypotheses for future research. It is therefore advised that CCA should be used for routine analyses into economics.Coastal States of Mexico, Canonical Correspondence Analysis, Diversity Index, Economic Development, Environmental Variables.

Processo de rotura do sismo Mw 7.0 de 2006 em Moçambique inferido através de dados sísmicos e de SAR.

This work is about the rupture process of the 2006 earthquake in Mozambique inferred from different types of data (seismic and SAR). We used 38 body waves from tele-seismic stations, two SAR images acquired by ENVISAT satellite and the map of surface faulting along the Machaze fault (Feton and Bommer, 2006), to study this earthquake. The model of rupture was determined by the body waves inversion and were used this parameters: strike = 165º, dip =76 º and rake = -90º; The model showed good results for a fault plane with 40.6km long and 29 km wide. The model of the displacement was obtained from the Okada equations and it revealed a displacement consistent with the maximum displacement of 86.8 cm observed in the interferogram and the vertical displacements measurements by Fenton and Bommer (2006)

Geophysical data fusion of ground-penetrating radar and magnetic datasets using 2D Wavelet transform and singular value decomposition

This work addresses the problem of the lack of perceptibility that geophysical data may have. Data fusion allows us to combine datasets, providing an improved and more informative source of information about structures buried in the ground. After testing different approaches, a strategy was developed using ground-penetrating radar and magnetic datasets collected over the same area. Data collected at the Roman Villa of Pisões (Beja, Portugal), which is a place of easy application of geophysical methods, were used to test the method, but with problems caused by the properties of the soil. The approach was based on processing operations that allow the fusion of images obtained by different equipment widely used in medical imaging for tumor detection and image processing. The goal is to create an improved image with data fusion that has higher quality than the input images, allowing a better understanding of the object of the study. The approach is composed of two stages: pre-processing and data fusion. Pre-processing is applied to enhance the input data. It consists of removing background noise through singular value decomposition applied in the spectral domain. Then the calculation of the data entropy will highlight the differences corresponding to the spatial alignments compatible with buried structures. Then, both entropy maps of the two datasets are fused in the second processing step to produce the final image. This step involves applying the 2D wavelet transform to each entropy map, decomposing them into sub-bands. Algorithms to calculate multiresolution singular value decomposition and the image gradient are applied to the sub-bands. The processed sub-band pairs are then fused using specific fusion rules. The fused image is obtained by applying the inverse of the wavelet transform. Data fusion with the proposed approach allows us to obtain a detailed image that is sharper and of better quality than the input datasets. The increase in sharpness and quality can be quantified through the sharpness index and the BRISQUE quality index in several steps of the processing. The obtained values confirm the graphical results. Images produced by the proposed data fusion approach suggest that the perceptibility has increased, allowing us to provide conclusions about the existence of buried structures.This work has been partially supported by the research project “Innovación abierta e inteligente en la EUROACE” with the reference 0049_INNOACE_4_E, by the European Union through the European Regional Development Fund included in COMPETE 2020, and through the Portuguese Foundation for Science and Technology (FCT) by the projects UIDB/04683/2020-ICT (Institute of Earth Sciences) and SFRH/BSAB/143063/2018

A formal approach for aerospace systems control considering SFC specification and C programming language

The C programming language is one of the most used in critical embedded real-time controllers applied at aerospace systems. Despite its potential, it is a very general language, with many maintenance problems and with a little or without graphical structure. The absence of formal verification techniques - even if it is possible to find some works associated to C programming language formal verification - is a fact. In this paper, it is proposed a methodology, that is divided in two main steps, and has, as main goal, to obtain safe C program code from a SFC specification: in first step some tools and techniques are used in order to assure the quality of the SFC specification and, on the second step, the goal is to translate (in a systematic way) the safe SFC specification to C code considering crucial aspects like taking into account aspects related with time specification

Caracterização da estrutura sub-superficial da ilha do Faial (Açores)

The aim of this communication is to present the velocity models of propagation of seismic waves P and S using geophysical methods, such as refraction surveys, MASW (Multichannel Analysis of Surface Waves), and Horizontal-to-Vertical spectral ratio ambient-noise in Faial Island (Azores). After determining the velocity models and ratios H/V, the results were compared for the same location, with previous works of ambient-noise and with lithology of the island. These results providing important physical parameters for a near surface characterization of the soil structure and to predict seismic ground motion in this region

A stochastic dynamic programming approach to optimize short-rotation coppice systems management scheduling: An application to eucalypt plantations under wildfire risk in Portugal

This article presents and discusses research with the aim of developing a stand-level management scheduling model for short-rotation coppice systems that may take into account the risk of wildfire. The use of the coppice regeneration method requires the definition of both the optimal harvest age in each cycle and the optimal number of coppice cycles within a full rotation. The scheduling of other forest operations such as stool thinning and fuel treatments (e.g., shrub removals) must be further addressed. In this article, a stochastic dynamic programming approach is developed to determine the policy (e.g., fuel treatment, stool thinning, coppice cycles, and rotation length) that maximizes expected net revenues. Stochastic dynamic programming stages are defined by the number of harvests, and state variables correspond to the number of years since the stand was planted. Wildfire occurrence and damage probabilities are introduced in the model to analyze the impact of the wildfire risk on the optimal stand management schedule policy. For that purpose, alternative wildfire occurrence and postfire mortality scenarios were considered at each stage. A typical Eucalyptus globulus Labill. stand in Central Portugal was used as a test case. Results suggest that the proposed approach may help integrate wildfire risk in short-rotation coppice systems management scheduling. They confirm that the maximum expected discounted revenue decreases with and is very sensitive to the discount rate and further suggest that the number of cycles within a full rotation is not sensitive to wildfire risk. Nevertheless, the expected rotation length decreases when wildfire risk is consideredinfo:eu-repo/semantics/publishedVersio

Addressing wildfire risk in a landscape-level scheduling model: an application in Portugal

Fundamental Research - Forest ManagementThe paper presents and discusses research aiming at the development of a forested landscape management scheduling model that may address the risk of wildfires. A general indicator is built from wildfire occurrence and damage probabilities to assess stand-level resistance to wildfires. This indicator is developed to further address the specificity of each stand configuration (e.g., shape and size) and spatial context (neighboring stands characteristics). The usefulness of the development of such an indicator is tested within a mixed integer programming (MIP) approach to find the location and timing of management options (e.g., fuel treatment, thinning, clearcut) that may maximize the forested landscape expected net revenues. The Leiria National Forest, a Portuguese forest in central Portugal, was used as a case study. Results suggest that the proposed approach may help integrate wildfire risk in forested landscape management planning and assess its impact on the optimal plan. Results further show that prescriptions that include fuel treatments are often chosen over others that do not include them, thus highlighting the importance of wildfire management efforts. Finally, they provide interesting insights about the role of thinnings and fuel treatment in mitigating wildfire riskinfo:eu-repo/semantics/publishedVersio

A perspectiva Macaronésica

"As 100 espécies seleccionadas como prioritárias para a gestão na Macaronésia europeia (i.e., Açores, Madeira, Selvagens e Canárias) são maioritariamente das Canárias (51 taxa), em segundo lugar do arquipélago da Madeira (26 taxa) e em terceiro lugar do arquipélago dos Açores (23 taxa). Esta distribuição é apenas mais ou menos concordante com a riqueza relativa das três regiões, já que estão registadas apenas 420 espécies endémicas para os Açores (Borges et al., 2005, 2008a), 1284 espécies endémicas para os arquipélagos da Madeira e Selvagens (Borges et al., 2008b) e 3572 espécies endémicas para as ilhas Canárias (Martín et al., 2005). A lista "Top 100" inclui taxa da flora e da fauna dos três arquipélagos macaronésicos acima referidos. O grupo dominante, ao nível do filo ou da divisão, é o das fanerogâmicas ou plantas com flor, no qual se incluem 66 taxa, seguido dos artrópodes, representados por 17 taxa. A distribuição por arquipélagos é desigual, e embora este padrão global se repita entre as espécies da Madeira e das Canárias, no caso dos Açores isso não sucede: o grupo mais numeroso é de longe o dos artrópodes, que compreende 12 dos 23 taxa selecionados"

A Lista Top 100

"Evitar a extinção das espécies é um dos maiores desafios actuais da ciência da conservação. A magnitude da perda de espécies é hoje tão importante que alguns autores defendem que estamos a ser testemunhas da sexta grande extinção na história da vida (Leakey & Lewin, 1995). De facto, no nosso planeta desta vez é a acção devastadora do Homem a força motriz que está a alterar habitats, a colocar em risco ecossistemas, e a extinguir inúmeras espécies, muitas delas desconhecidas para a ciência (Lawton & May, 1995; Pimm et al., 1995, 1996; Chapin et al., 2000). Durante os últimos séculos estas extinções tem sido muito significativas nas ilhas de todo o mundo (Reid & Miller, 1989; Lawton & May, 1995; Sadler, 1999; Steadman & Martin, 2003), o que tem estimulado o debate sobre a questão se os endemismos insulares são intrinsecamente mais sensíveis às ameaças do que as formas continentais (Manne et al., 1999; Sax et al., 2002; Frankham, 2005). Contudo embora não pareça claro que assim seja (Manne & Pimm, 2001; Biber, 2002), o facto é que as ilhas por serem territórios com muitos taxa endémicos de distribuição reduzida a espaços limitados e, como consequência disso, com poucas possibilidades de escapar a uma eventual ameaça –como por exemplo a introdução de um novo predador–, tem o risco de extinção aumentado (Duncan & Blackburn, 2007). Evidências mostram igualmente que nas ilhas o número de espécies de plantas vasculares não nativas tem subido mais do que a extinção do número de espécies nativas mas que nas aves as extinções igualam o ganho de espécies exóticas (Sax et al., 2002). O facto é que, independentemente da maior ou menor propensão ao desaparecimento das espécies insulares, as consequências devastadoras das ameaças externas nos territórios isolados levam a que as extinções nas ilhas sejam mais frequentes do que nos espaços abertos continentais (Quammen, 1997). [...]