Exclusion Statistics in a trapped two-dimensional Bose gas

We study the statistical mechanics of a two-dimensional gas with a repulsive delta function interaction, using a mean field approximation. By a direct counting of states we establish that this model obeys exclusion statistics and is equivalent to an ideal exclusion statistics gas.Comment: 3 pages; minor changes in notation; typos correcte

Laser velocimetry applied to transonic and supersonic aerodynamics

Measurements obtained with laser velocimetry in a Mach 2.9 separated turbulent boundary layer and in the transonic flow past a two-dimensional airfoil section are presented and compared to data realized by conventional techniques. Agreement in mean velocities was realized where the pressure measurements could be considered reliable; however, in regions of instantaneous reverse velocities, the laser results were found to be consistent with the physics of the flow whereas the pressure data were not. Streamwise turbulence intensities are also presented. In the transonic airfoil study, velocity measurements obtained immediately outside the upper surface boundary layer of a 6-inch chord NACA 64A010 airfoil are compared to edge velocities inferred from surface pressure measurements. For free-stream Mach numbers of 0.6 and 0.8, the agreement in results was very good. "Dual scatter" optical arrangements in conjunction with a single particle, counter-type signal processor were employed in these investigations

Feasibility of conventional control techniques for large highly coupled elastic boost vehicles Final report

Control techniques for large highly-coupled elastic boost vehicles with elastic and fuel slosh mode frequencies close to desired control frequencies - motion equation

Pilot dynamic response to sudden flight control system failures and implications for design

Pilot dynamic response to sudden flight control system failure

Development of approach control system requirements with applications to a jet transport

The development of requirements for an approach control system and example applications to a jet transport aircraft are presented. The material is divided into a general discussion of approach control requirements, and a specific application resulting in the design of three alternative longitudinal controllers. The point of view taken is that the essential features of the system structure are the feedbacks themselves, their equalization, and their combinations to create control commands. Use is made of the fact that for sucessful systems the possible feedback structures are very limited. They derive primarily from guidance, control, and regulation demands; and secondarily from dynamic response characteristics desired by the pilot. From the systems view it is the satisfaction of these requirements that is important rather than the means automatic, manual, or hygrid manual/automatic approach systems

Clonal mixing in the soldier-producing aphid <i>Pemphigus spyrothecae</i> (Hemiptera: Aphididae)

Illuminating the genetic relationships within soldier-producing aphid colonies is an essential element of any attempt to explain the evolution of the altruistic soldier caste. Pemphigus spyrothecae is a soldier-producing aphid that induces galls on the leaf petioles of its host (trees of the genus Populus). At least a quarter of the aphids within the clonally produced gall population are morphologically and behaviourally distinct first-instar soldiers that defend the gall population from predation. Using field trapping and microsatellites, we investigated the degree of clonal mixing within natural gall populations. Field trapping in the UK showed that all the migrants of P. spyrothecae and of two other Pemphigus species were wingless first-instar soldiers. The average degree of mixing estimated from trapping P. spyrothecae migrants was 0.68% (range = 0–15%). Microsatellite genotyping of 277 aphids from 13 galls collected in Italy revealed an average mixing level of 10.4% (range = 0–59%). Six galls contained more than one clone (range = 2–5 clones). Non-kin aphids were not restricted to the soldier caste but were evenly distributed across instars. An additional gall, from which 527 occupants were genotyped, contained 12 non-kin aphids distributed among nine clones, showing that clonal diversity can be high even when mixing is very low. These observations suggest that although soldiers migrate regularly and can moult and reproduce within foreign galls, clonal mixing in this species is generally low and is unlikely to provide a barrier to the evolution of investment by the aphid clones in an altruistic soldier caste

Atomic resolution STM imaging of a twisted single-wall carbon nanotube

We present atomically-resolved STM images of single-wall carbon nanotubes (SWNTs) embedded in a crystalline nanotube rope. Although they may be interpreted as of a chiral nanotube, the images are more consistently explained a an achiral armchair tube with a quenched twist distortion. The existence of quenched twists in SWNTs in ropes might explain the fact that both as-grown bulk nanotube material and individual ropes have insulator-like conductivity at low temperature.Comment: preprint, 4 pages, and 4 gif figure

Fatigue damage growth mechanisms in continuous fiber reinforced titanium matrix composites

The role of fiber/matrix interface strength, residual thermal stresses, and fiber and matrix properties on fatigue damage accumulation in continuous fiber metal matrix composites (MMC) is discussed. Results from titanium matrix silicon carbide fiber composites is the primary topic of discussion. Results were obtained from both notched and unnotched specimens at room and elevated temperatures. The stress in the 0 deg fibers was identified as the controlling factor in fatigue life. Fatigue of the notched specimens indicated that cracks can grow in the matrix materials without breaking fibers

HAT-P-30b: A Transiting Hot Jupiter on a Highly Oblique Orbit

We report the discovery of HAT-P-30b, a transiting exoplanet orbiting the V = 10.419 dwarf star GSC 0208-00722. The planet has a period P = 2.810595 ± 0.000005 days, transit epoch Tc = 2455456.46561 ± 0.00037 (BJD), and transit duration 0.0887 ± 0.0015 days. The host star has a mass of 1.24 ± 0.04 M_⊙, radius of 1.21 ± 0.05 R_⊙, effective temperature of 6304 ± 88 K, and metallicity [Fe/H] = +0.13 ± 0.08. The planetary companion has a mass of 0.711 ± 0.028 M J and radius of 1.340 ± 0.065 R J yielding a mean density of 0.37 ± 0.05 g cm^(–3). We also present radial velocity measurements that were obtained throughout a transit that exhibit the Rossiter-McLaughlin effect. By modeling this effect, we measure an angle of λ = 73.°5 ± 9.°0 between the sky projections of the planet's orbit normal and the star's spin axis. HAT-P-30b represents another example of a close-in planet on a highly tilted orbit, and conforms to the previously noted pattern that tilted orbits are more common around stars with T_(eff*) ≳ 6250 K

Correlations between deposition parameters and structural and electrical properties of YBa2Cu3O7–delta thin films grown in situ by sequential ion beam sputtering

We have studied the correlations between deposition parameters and structural and electrical properties of YBa2Cu3O7–delta thin films grown in situ by sequential ion beam sputtering. Epitaxial, c-axis oriented YBa2Cu3O7–delta films were grown both on (100) SrTiO3 and on (100) MgO substrates following the stacking sequence of the ``123'' compound, with deposited layer thicknesses nominally equal to 1 monolayer. The c-axis lattice parameters obtained were larger than the corresponding lattice parameter in bulk samples, even after low-temperature anneals in O2. The transition temperatures were found to decrease with the enlargement of the c-axis lattice parameter. A clear correlation between growth temperature and the value of the c-axis lattice parameter was observed. The c-axis lattice parameter and the x-ray linewidth of Bragg reflections with the G vector along the c-axis were also found to be correlated. This suggests a relationship between the c-axis lattice parameter and the structural coherence of the epitaxial films