An experimental procedure for the Iosipescu composite specimen tested in the modified Wyoming fixture

A detailed description is given of the experimental procedure for testing composite Iosipescu specimens in the modified Wyoming fixture. Specimen preparation and strain gage instrumentation are addressed. Interpretation of the experimental results is discussed. With the proper experimental procedure and setup, consistent and repeatable shear properties are obtained

A comparison of three popular test methods for determining the shear modulus of composite materials

Three popular shear tests (the 10 degree off-axis, the plus or minus 45 degree tensile, and the Iosipescu specimen tested in the modified Wyoming fixture) for shear modulus measurement are evaluated for a graphite-epoxy composite material system. A comparison of the shear stress-strain response for each test method is made using conventional strain gage instrumentation and moire interferometry. The uniformity and purity of the strain fields in the test sections of the specimens are discussed, and the shear responses obtained from each test technique are presented and compared. For accurate measurement of shear modulus, the 90 degree Iosipescu specimen is recommended

Culpability and Willingness to Pay to Reduce Negative Externalities: A Contingent Valuation and Experimental Economics Study

Financial Economics,

Destructive Hostility: The Jeffrey Dahmer Case: A Psychiatric and Forensic Study of a Serial Killer

We were involved as forensic experts in the case of the serial killer Jeffrey Dahmer. We discuss the scene and victim autopsy findings, with a brief consideration of the basic emotion of hostility. These findings support the thesis that at the basis of this serial killer\u27s behavior were primary unconscious feelings of hate that he had channeled into a sadistic programmed destruction of 17 young men. The interview of the serial killer, the photographic scene documentation, and the autopsy findings stress the ambivalent homosexuality of the killer, his sexual sadism, his obsessive fetishism, and his possible cannibalism and necrophilia

Composite material shear property measurement using the Iosipescu specimen

A detailed evaluation of the suitability of the Iosipescu specimen tested in the modified Wyoming fixture is presented. Finite element analysis and moire interferometry are used to assess the uniformity of the shear stress field in the test section of unidirectional and cross-ply graphite-epoxy composites. The nonuniformity of the strain field and the sensitivity of some fiber orientations to the specimen/fixture contact mechanics are discussed. The shear responses obtained for unidirectional and cross-ply graphite-epoxy composites are discussed and problems associated with anomalous behavior are addressed. An experimental determination of the shear response of a range of material systems using strain gage instrumentation and moire interferometry is performed

NGC 4102: High Resolution Infrared Observations of a Nuclear Starburst Ring

The composite galaxy NGC 4102 hosts a LINER nucleus and a starburst. We mapped NGC 4102 in the 12.8 micron line of [NeII], using the echelon spectrometer TEXES on the NASA IRTF, to obtain a data cube with 1.5" spatial and 25 km/s spectral, resolution. Combining near-infrared, radio, and the [NeII] data shows that the extinction to the starburst is substantial, more than 2 magnitudes at K band, and that the neon abundance is less than half solar. We find that the star formation in the nuclear region is confined to a rotating ring or disk of 4.3" (~300 pc) diameter, inside the Inner Lindblad Resonance. This region is an intense concentration of mass, with a dynamical mass of ~3 x 10^9 solar masses, and of star formation. The young stars in the ring produce the [NeII] flux reported by Spitzer for the entire galaxy. The mysterious blue component of line emission detected in the near-infrared is also seen in [NeII]; it is not a normal AGN outflow.Comment: submitted to Ap

Non-linear numerical analysis of the Iosipescu specimen for composite materials

A nonlinear elastic finite element analysis is presented of the Iosipescu shear specimen tested in the modified Wyoming fixture for unidirectional graphite/epoxy composites. It is shown that the nonlinear effects due to specimen-to-fixture contact interactions and specimen geometry on the overall shear response are negligible. It is proposed that the tangential shear modulus should be used to characterize the shear resistance of composite materials with highly nonlinear shear response. The correction factors, which are needed to compensate for the nonuniformity of the shear stress or strain distribution in the specimen test section for shear modulus measurement, have to be defined carefully. Strain contours in the nonlinear response ranges are presented and the initiation of failure in the notch regions is investigated