1,876 research outputs found
Effect of software version and parameter settings on the marginal and internal adaptation of crowns fabricated with the CAD/CAM system
Objective This study investigated the marginal and internal adaptation of individual dental crowns fabricated using a CAD/CAM system (Sironaās BlueCam), also evaluating the effect of the software version used, and the specific parameter settings in the adaptation of crowns.Material and Methods Forty digital impressions of a master model previously prepared were acquired using an intraoral scanner and divided into four groups based on the software version and on the spacer settings used. The versions 3.8 and 4.2 of the software were used, and the spacer parameter was set at either 40 Ī¼m or 80 Ī¼m. The marginal and internal fit of the crowns were measured using the replica technique, which uses a low viscosity silicone material that simulates the thickness of the cement layer. The data were analyzed using a Friedman two-way analysis of variance (ANOVA) and paired t-tests with significance level set at
Recommended from our members
Locally Controlled Sensing Properties of Stretchable Pressure Sensors Enabled by Micro-Patterned Piezoresistive Device Architecture.
For wearable health monitoring systems and soft robotics, stretchable/flexible pressure sensors have continuously drawn attention owing to a wide range of potential applications such as the detection of human physiological and activity signals, and electronic skin (e-skin). Here, we demonstrated a highly stretchable pressure sensor using silver nanowires (AgNWs) and photo-patternable polyurethane acrylate (PUA). In particular, the characteristics of the pressure sensors could be moderately controlled through a micro-patterned hole structure in the PUA spacer and size-designs of the patterned hole area. With the structural-tuning strategies, adequate control of the site-specific sensitivity in the range of 47~83 kPa-1 and in the sensing range from 0.1 to 20 kPa was achieved. Moreover, stacked AgNW/PUA/AgNW (APA) structural designed pressure sensors with mixed hole sizes of 10/200 Āµm and spacer thickness of 800 Āµm exhibited high sensitivity (~171.5 kPa-1) in the pressure sensing range of 0~20 kPa, fast response (100~110 ms), and high stretchability (40%). From the results, we envision that the effective structural-tuning strategy capable of controlling the sensing properties of the APA pressure sensor would be employed in a large-area stretchable pressure sensor system, which needs site-specific sensing properties, providing monolithic implementation by simply arranging appropriate micro-patterned hole architectures
Concomitant renal insufficiency and diabetes mellitus as prognostic factors for acute myocardial infarction
<p>Abstract</p> <p>Background</p> <p>Diabetes mellitus and renal dysfunction are prognostic factors after acute myocardial infarction (AMI). However, few studies have assessed the effects of renal insufficiency in association with diabetes in the context of AMI. Here, we investigated the clinical outcomes according to the concomitance of renal dysfunction and diabetes mellitus in patients with AMI.</p> <p>Methods</p> <p>From November 2005 to August 2008, 9905 patients (63 Ā± 13 years; 70% men) with AMI were enrolled in a nationwide prospective Korea Acute Myocardial Infarction Registry (KAMIR) and were categorized into 4 groups: Group I (n = 5700) had neither diabetes nor renal insufficiency (glomerular filtration rate [GFR] ā„ 60 ml/min/1.73 m<sup>2</sup>), Group II (n = 1730) had diabetes but no renal insufficiency, Group III (n = 1431) had no diabetes but renal insufficiency, and Group IV (n = 1044) had both diabetes and renal insufficiency. The primary endpoints were major adverse cardiac events (MACE), including a composite of all cause-of-death, myocardial infarction, target lesion revascularization, and coronary artery bypass graft after 1-year clinical follow-up.</p> <p>Results</p> <p>Primary endpoints occurred in 1804 (18.2%) patients. There were significant differences in composite MACE among the 4 groups (Group I, 12.5%; Group II, 15.7%; Group III, 30.5%; Group IV, 36.5%; <it>p </it>< 0.001). In a Cox proportional hazards model, after adjusting for multiple covariates, the 1-year mortality increased stepwise from Group III to IV as compared with Group I (hazard ratio [HR], 1.96; 95% confidence interval [CI], 1.34-2.86; <it>p </it>= 0.001; and HR, 2.42; 95% CI, 1.62-3.62; <it>p </it>< 0.001, respectively). However, Kaplan-Meier analysis showed no significant difference in probability of death at 1 year between Group III and IV (p = 0.288).</p> <p>Conclusions</p> <p>Renal insufficiency, especially in association with diabetes, is associated with the occurrence of composite MACE and indicates poor prognosis in patients with AMI. Categorization of patients with diabetes and/or renal insufficiency provides valuable information for early-risk stratification of AMI patients.</p
Recommended from our members
Highly-Sensitive Textile Pressure Sensors Enabled by Suspended-Type All Carbon Nanotube Fiber Transistor Architecture.
Among various wearable health-monitoring electronics, electronic textiles (e-textiles) have been considered as an appropriate alternative for a convenient self-diagnosis approach. However, for the realization of the wearable e-textiles capable of detecting subtle human physiological signals, the low-sensing performances still remain as a challenge. In this study, a fiber transistor-type ultra-sensitive pressure sensor (FTPS) with a new architecture that is thread-like suspended dry-spun carbon nanotube (CNT) fiber source (S)/drain (D) electrodes is proposed as the first proof of concept for the detection of very low-pressure stimuli. As a result, the pressure sensor shows an ultra-high sensitivity of ~3050 Pa-1 and a response/recovery time of 258/114 ms in the very low-pressure range of <300 Pa as the fiber transistor was operated in the linear region (VDS = -0.1 V). Also, it was observed that the pressure-sensing characteristics are highly dependent on the contact pressure between the top CNT fiber S/D electrodes and the single-walled carbon nanotubes (SWCNTs) channel layer due to the air-gap made by the suspended S/D electrode fibers on the channel layers of fiber transistors. Furthermore, due to their remarkable sensitivity in the low-pressure range, an acoustic wave that has a very tiny pressure could be detected using the FTPS
One Year Follow-up Result of Doppler-guided Hemorrhoidal Artery Ligation and Recto-Anal Repair in 97 Consecutive Patients
Recommended from our members
Locally Controlled Sensing Properties of Stretchable Pressure Sensors Enabled by Micro-Patterned Piezoresistive Device Architecture
For wearable health monitoring systems and soft robotics, stretchable/flexible pressure sensors have continuously drawn attention owing to a wide range of potential applications such as the detection of human physiological and activity signals, and electronic skin (e-skin). Here, we demonstrated a highly stretchable pressure sensor using silver nanowires (AgNWs) and photo-patternable polyurethane acrylate (PUA). In particular, the characteristics of the pressure sensors could be moderately controlled through a micro-patterned hole structure in the PUA spacer and size-designs of the patterned hole area. With the structural-tuning strategies, adequate control of the site-specific sensitivity in the range of 47~83 kPaā1 and in the sensing range from 0.1 to 20 kPa was achieved. Moreover, stacked AgNW/PUA/AgNW (APA) structural designed pressure sensors with mixed hole sizes of 10/200 Āµm and spacer thickness of 800 Āµm exhibited high sensitivity (~171.5 kPaā1) in the pressure sensing range of 0~20 kPa, fast response (100~110 ms), and high stretchability (40%). From the results, we envision that the effective structural-tuning strategy capable of controlling the sensing properties of the APA pressure sensor would be employed in a large-area stretchable pressure sensor system, which needs site-specific sensing properties, providing monolithic implementation by simply arranging appropriate micro-patterned hole architectures
Effect of Chongkukjang on histamine-induced skin wheal response: A randomized, double-blind, placebo-controlled trial
AbstractBackgroundStudies in animals have demonstrated the antiallergenic properties of Chongkukjang (CKJ), a traditional Korean food made by fermentation of soybean with Bacillus subtilis. CKJ might therefore be used as an ingredient in a functional food designed to suppress allergies. The purpose of this study was to investigate the effect of CKJ on histamine-induced skin wheal response in healthy participants.MethodsA randomized, double-blind, placebo-controlled trial was conducted. Sixty participants (48 women and 12 men) were randomly assigned to one of two groups: One group received 35Ā g CKJ daily for 12 weeks, and the other received a placebo at the same dosing frequency. A skin prick test with histamine (10Ā mg/mL) was conducted on the ventral forearm 10Ā cm from the elbow, and assessed 15 minutes later. Outcomes included measurement of efficacy [skin wheal response, immunoglobulin E (IgE), histamine, interferon-gamma, interleukin-4, eosinophil, and eosinophil cationic protein (ECP)], and safety (adverse events, laboratory test results, electrocardiogram, anthropometric values, and vital signs).ResultsFifty-five participants (28 in the CKJ group and 27 in the placebo group) completed the study. After 12 weeks of supplementation, participants in the CKJ group showed a significant reduction in histamine-induced skin wheal areas compared with placebo group (pĀ <Ā 0.05). At 12 weeks, the CKJ group showed a significant improvement in percentage change from baseline in histamine-induced wheal area, compared with the placebo group (pĀ <Ā 0.05). CKJ did not influence blood levels of IgE, histamine, interferon-gamma, interleukin-4, eosinophil, or ECP.ConclusionOral administration of CKJ for 12 weeks resulted in a reduction of the skin wheal response to histamine, with no apparent adverse effects. Trial registration: ClinicalTrials.gov: NCT01402141
Does gender influence the impact of impaired renal function on prognosis after ST-segment elevated myocardial infarction?
Background: A limited number of studies have investigated the impact of gender on renal function and clinical outcomes after ST-segment elevated myocardial infarction (STEMI), and these studies have provided discrepant results.Methods and Results: This study was based on a retrospective cohort, the Korean Acute Myocardial Infarction Registry (KAMIR). Patients (n = 7,679) with a discharge diagnosis of STEMI were analyzed to investigate association of gender with renal function and clinical outcomes. Compared to men, women were older and exhibited more comorbidity, including impaired renal function. Women showed higher mortality compared to men (1-month mortality,5.6% in men vs. 12.6% in women, p < 0.001; 1-year mortality, 6.8% in men vs. 14.4% in women, p < 0.001). The risk of death proportionally increased as estimated glomerular filtration rate (eGFR) decreased in both genders. After adjusting for potential confounders, hazard ratios for women did not significantly differ from those for men at each eGFR level.The interaction test showed no significant interaction between gender and eGFR in 1-month mortality and 1-year mortality.Conclusions: Impaired renal function was an independent prognostic factor after STEMI in both genders, and the impact of impaired renal function on prognosis after STEMI did not significantly differ between genders
Comparison of Concomitant Mesalamine and Immunomodulator Therapy and Immunomodulator Monotherapy for Crohnās Disease
- ā¦