Impact of citalopram combined with mindfulness-based stress reduction on symptoms, cognitive functions and self-confidence in patients with depression

Purpose: To investigate the impact of the combination of citalopram and mindfulness-based stress reduction (MBSR) on the symptoms, cognitive functions and self-confidence of patients with depression.Methods: A total of 98 patients with depression were selected as study subjects and divided into combination therapy group (CT, n = 51) and conventional group (C, n = 47. The conventional group was treated with citalopram, while the combined group was treated with a combination of citalopram and MBSR. Depressive symptoms and self-confidence were evaluated using the 17-item Hamilton Depression Rating Scale (HAMD-17) and General Self-efficacy Scale (GSES). Cognitive functions were assessed by Wisconsin Card Sorting Test (WCST) and Trail Making Test (TMT). Changes in depressive symptoms, cognitive functions, self-confidence and clinical efficacies between the two groups were compared.Results: At weeks 1, 4 and 8 after treatment, CT group had lower HAMD-17 scores but higher GSES scores when compared with the conventional group (p < 0.05). In addition, CT group was superior to the conventional group in efficacy and overall response rate (100.00 vs. 85.11 %, p < 0.05). Also, CT group showed a shorter time of perseverative and non-perseverative errors on WCST and a shorter time for TMT-A and TMT-B, compared with the conventional group (p < 0.05).Conclusion: The combination therapy of citalopram and MBSR is effective in ameliorating depressive symptoms, and enhancing cognitive functions and self-confidence in patients with depression. These findings will increase the understanding of this combination therapy, and provide a clinical reference for the treatment of depression

Nrf2−/− regulated lung DNA demethylation and CYP2E1 DNA methylation under PM2.5 exposure

Cytochrome P450 (CYP450) can mediate fine particulate matter (PM2.5) exposure leading to lung injury. Nuclear factor E2-related factor 2 (Nrf2) can regulate CYP450 expression; however, the mechanism by which Nrf2−/− (KO) regulates CYP450 expression via methylation of its promoter after PM2.5 exposure remains unclear. Here, Nrf2−/− (KO) mice and wild-type (WT) were placed in a PM2.5 exposure chamber (PM) or a filtered air chamber (FA) for 12 weeks using the real-ambient exposure system. The CYP2E1 expression trends were opposite between the WT and KO mice following PM2.5 exposure. After exposure to PM2.5,CYP2E1 mRNA and protein levels were increased in WT mice but decreased in KO mice, and CYP1A1 expression was increased after exposure to PM2.5 in both WT and KO mice. CYP2S1 expression decreased after exposure to PM2.5 in both the WT and KO groups. We studied the effect of PM2.5 exposure on CYP450 promoter methylation and global methylation levels in WT and KO mice. In WT and KO mice in the PM2.5 exposure chamber, among the methylation sites examined in the CYP2E1 promoter, the CpG2 methylation level showed an opposite trend with CYP2E1 mRNA expression. The same relationship was evident between CpG3 unit methylation in the CYP1A1 promoter and CYP1A1 mRNA expression, and between CpG1 unit methylation in the CYP2S1 promoter and CYP2S1 mRNA expression. This data suggests that methylation of these CpG units regulates the expression of the corresponding gene. After exposure to PM2.5, the expression of the DNA methylation markers ten-eleven translocation 3 (TET3) and 5-hydroxymethylcytosine (5hmC) was decreased in the WT group but significantly increased in the KO group. In summary, the changes in CYP2E1, CYP1A1, and CYP2S1 expression in the PM2.5 exposure chamber of WT and Nrf2−/− mice might be related to the specific methylation patterns in their promoter CpG units. After exposure to PM2.5, Nrf2 might regulate CYP2E1 expression by affecting CpG2 unit methylation and induce DNA demethylation via TET3 expression. Our study revealed the underlying mechanism for Nrf2 to regulate epigenetics after lung exposure to PM2.5

Design, preparation, and performance characterization of low temperature environment-resistant composite resin matrix in rocket fuel

Cryogenic technology is a vital part of our society, not only in our lives, but also in the field of cutting-edge technology. The research and application of cryogenic technology is involved in many important projects in many countries and even in the world, such as aviation, aerospace, energy, transportation, and medicine. With its high specific strength and high specific modulus, carbon fiber reinforced resin matrix composite materials have gradually become the key material for aerospace vehicles, with significant advantages in reducing structural weight and improving structural efficiency. However, in the ultra-low temperature environment such as liquid hydrogen and liquid oxygen, the overall structure of carbon fiber reinforced resin matrix composites is severely tested by the environment, and it is extremely important to evaluate the mechanical properties of the composites under ultra-low temperature due to the difference of their material structure and properties from those of traditional materials, and the difference of thermal expansion coefficients between the reinforcing material carbon fiber and the resin matrix in rocket fuel. In this paper, the epoxy resin-based composite system was prepared by modifying TDE-85 epoxy resin with low-viscosity cyanate resin through molecular structure design, which is suitable for ultra-low temperature environment. The surface tension and dynamic contact angle of the modified epoxy resin are better than those of the pure epoxy resin, and it can form a good infiltration with carbon fiber and the interfacial properties of the composite are excellent. Secondly, the modified epoxy resin-based composite unidirectional plate was prepared by wet winding molding process, and the low-temperature mechanical property test specimens were prepared according to the relevant test standards. The mechanical properties were tested at −196℃, −150℃, −90℃ and room temperature 25℃ to obtain the low-temperature mechanical properties of the composite system, which provided the basis for the design of the composite system in the ultra-low temperature environment. Finally, the microstructure of the epoxy matrix composites was characterized by SEM method after the different temperature tests. The material structure, morphology, and composition were characterized by field emission scanning electron microscopy (FESEM, M400 FEI) with energy dispersive X-ray spectroscopy (EDS). In this paper, TDE-85 epoxy resin was modified with low viscosity cyanate resin to produce a modified epoxy resin suitable for ultra-low temperature environment, and the process properties of the epoxy resin were characterized. The surface tension of the modified epoxy resin was 43.405 mN/m, which was significantly lower than that of the pure epoxy resin at room temperature of 48.814 mN/m. Therefore, the modified epoxy resin had better flowability and required less time to wet the fibers during the molding process, resulting in higher molding efficiency

High-Performance Flexible Piezoresistive Pressure Sensor Printed with 3D Microstructures

Flexible pressure sensors have been widely used in health detection, robot sensing, and shape recognition. The micro-engineered design of the intermediate dielectric layer (IDL) has proven to be an effective way to optimize the performance of flexible pressure sensors. Nevertheless, the performance development of flexible pressure sensors is limited due to cost and process difficulty, prepared by inverted mold lithography. In this work, microstructured arrays printed by aerosol printing act as the IDL of the sensor. It is a facile way to prepare flexible pressure sensors with high performance, simplified processes, and reduced cost. Simultaneously, the effects of microstructure size, PDMS/MWCNTs film, microstructure height, and distance between the microstructures on the sensitivity and response time of the sensor are studied. When the microstructure size, height, and distance are 250 µm, 50 µm, and 400 µm, respectively, the sensor shows a sensitivity of 0.172 kPa−1 with a response time of 98.2 ms and a relaxation time of 111.4 ms. Studies have proven that the microstructured dielectric layer printed by aerosol printing could replace the inverted mold technology. Additionally, applications of the designed sensor are tested, such as the finger pressing test, elbow bending test, and human squatting test, which show good performance

Construction of Bi-Enzyme Self-Assembly Clusters Based on SpyCatcher/SpyTag for the Efficient Biosynthesis of (R)-Ethyl 2-hydroxy-4-phenylbutyrate

Cascade reactions catalyzed by multi-enzyme systems are important in science and industry and can be used to synthesize drugs and nutrients. In this study, two types of macromolecules of bi-enzyme self-assembly clusters (BESCs) consisting of carbonyl reductase (CpCR) and glucose dehydrogenase (GDH) were examined. Stereoselective CpCR and GDH were successfully fused with SpyCatcher and SpyTag, respectively, to obtain four enzyme modules, namely: SpyCatcher-CpCR, SpyCatcher-GDH, SpyTag-CpCR, and SpyTag-GDH, which were covalently coupled in vitro to form two types of hydrogel-like BESCs: CpCR-SpyCatcher-SpyTag-GDH and GDH-SpyCatcher-SpyTag-CpCR. CpCR-SpyCatcher-SpyTag-GDH showed a better activity and efficiently converted ethyl 2-oxo-4-phenylbutyrate (OPBE) to ethyl(R)2-hydroxy-4-phenylbutanoate ((R)-HPBE), while regenerating NADPH. At 30 °C and pH 7, the conversion rate of OPBE with CpCR-SpyCatcher-SpyTag-GDH as a catalyst reached 99.9%, with the ee% of (R)-HPBE reaching above 99.9%. This conversion rate was 2.4 times higher than that obtained with the free bi-enzyme. The pH tolerance and temperature stability of the BESCs were also improved compared with those of the free enzymes. In conclusion, bi-enzyme assemblies were docked using SpyCatcher/SpyTag to produce BESCs with a special structure and excellent catalytic activity, improving the catalytic efficiency of the enzyme

Efficient Synthesis of Key Chiral Intermediate in Painkillers (R)-1-[3,5-Bis(trifluoromethyl)phenyl]ethanamine by Bienzyme Cascade System with R-ω-Transaminase and Alcohol Dehydrogenase Functions

(R)-1-[3,5-bis(trifluoromethyl)phenyl]ethanamine, a key chiral intermediate of selective tetrodotoxin-sensitive blockers, was efficiently synthesized by a bienzyme cascade system formed by with R-ω-transaminase (ATA117) and an alcohol dehydrogenase (ADH) co-expression system. Herein, we report that the use of ATA117 as the biocatalyst for the amination of 3,5-bistrifluoromethylacetophenone led to the highest efficiency in product performance (enantiomeric excess > 99.9%). Moreover, to further improve the product yield, ADH was introduced into the reaction system to promote an equilibrium shift. Additionally, bienzyme cascade system was constructed by five different expression systems, including two tandem expression recombinant plasmids (pETDuet-ATA117-ADH and pACYCDuet-ATA117-ADH) and three co-expressed dual-plasmids (pETDuet-ATA117/pET28a-ADH, pACYCDuet-ATA117/pET28a-ADH, and pACYCDuet-ATA117/pETDuet-ADH), utilizing recombinant engineered bacteria. Subsequent studies revealed that as compared with ATA117 single enzyme, the substrate handling capacity of BL21(DE3)/pETDuet-ATA117-ADH (0.25 g wet weight) developed for bienzyme cascade system was increased by 1.50 folds under the condition of 40 °C, 180 rpm, 0.1 M pH9 Tris-HCl for 24 h. To the best of our knowledge, ours is the first report demonstrating the production of (R)-1-[3,5-bis(trifluoromethyl)phenyl]ethanamine using a bienzyme cascade system, thus providing valuable insights into the biosynthesis of chiral amines